Skip to content

nopnop2002/Raspberry-ili9325

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

8Bit/16Bit Parallel TFT Library for WiringPi

This is library for RaspberryPi.
You can use a TFT Shield for UNO R3.
This library can show a chart to TFT Shield.

TFT-Shield

Primarily, these TFT Shiled is the one for Arduino.
This may works with other boards like OrangePi/NanoPi.

Supported TFT controllers:

Generic 8bit Sheild

  • ILI9320(240x320)
  • ILI9325(240x320)
  • ILI9341(240x320)
  • ILI9342(240x320)
  • ILI9481(320x480)
  • ILI9486(320x480)
  • ILI9488(320x480)
  • SPFD5408(240x320 Same as ILI9320)
  • R61505U(240x320 Same as ILI9320)
  • R61509V(240x400)
  • ST7781(240x320)
  • ST7783(240x320 Same as ST7781)
  • ST7793(240x400 Same as R61509)
  • ST7796(320x480 Same as ILI9486)

Generic 16bit Sheild

  • ILI9341(240x320)

OPEN-SMART Products

  • OPEN-SMART ILI9225 TFT-Shield(176x220)
  • OPEN-SMART ILI9327 TFT-Shield(240x400)
  • OPEN-SMART ILI9340 TFT-Shield(240x320)
  • OPEN-SMART S6D1121 16Pin-Parallel(240x320)
  • OPEN-SMART ST7775 16Pin-Parallel(176x220 Same as ILI9225)
  • OPEN-SMART ST7783 16Pin-Parallel(240x320)
  • OPEN-SMART R61509V 16Pin-Parallel(240x400)
  • OPEN-SMART ILI9488 16Pin-Parallel(320x400 Color inversion)

These are all 2.4 inch, 320x240 TFTs. TFT-SHIELD-2

3.95 inches is almost twice as large as 2.4 inches. TFT-SHIELD-3

These are OPEN-SMART 16Pin-Parallel Products. OPEN-SMART-16Pin


Software requirement

  • WiringPi Library
    This project uses the wiringPiSetup() function to initialize GPIOs.
    If you use it on a board other than the RPI board, you may need to change the GPIO number.
    As far as I know, there are these libraries.
    • WiringPi for OrangePi
    • WiringPi for OrangePi Zero
    • WiringPi for OrangePi3
    • WiringPi for BananaPi
    • WiringPi for NanoPi
    • WiringPi for Pine-64

Wirering for 8Bit Parallel

TFT RPI
LCD_RST -- Pin#7
LCD_CS -- Pin#3
LCD_RS -- Pin#5
LCD_WR -- Pin#26
LCD_RD -- Pin#28
LCD_D0 -- Pin#29
LCD_D1 -- Pin#31
LCD_D2 -- Pin#33
LCD_D3 -- Pin#35
LCD_D4 -- Pin#37
LCD_D5 -- Pin#32
LCD_D6 -- Pin#36
LCD_D7 -- Pin#38
5V -- 5V(*)
3.3V -- 3.3V(*)
GND -- GND

*When a regulator(It's often AMS1117) is mounted on the back, it's operated 5V.
*When a regulator is NOT mounted on the back, it's operated 3.3V.

NOTE
My R61509V has a regulator on the back.
Normally, a TFT with a regulator works at 5V, but my R61509V doesn't work unless I supply both 5V and 3.3V.

NOTE
You can change any pin.
Pin define is "pin.conf".
If you use a 26-pin header, you can use "pin.conf.26pin" instead of "pin.conf".


Build

  • for ILI9225
    make ILI9225

  • for ILI9320
    make ILI9320

  • for ILI9325
    make ILI9325

  • for ILI9327
    make ILI9327

  • for ILI9341
    make ILI9341

  • for ILI9342
    make ILI9342

  • for ILI9481
    make ILI9481

  • for ILI9486
    make ILI9486

  • for ILI9488
    make ILI9488

  • for ILI9488 Inversion Color
    make ILI9488-INVERT

  • for SPFD5408
    make SPFD5408

  • for R61505U
    make R61505U

  • for R61509V
    make R61509V

  • for S6D1121
    make S6D1121

  • for ST7775
    make ST7775

  • for ST7781
    make ST7781

  • for ST7783
    make ST7783

  • for ST7793
    make ST7793

  • for ST7796
    make ST7796


How to find the TFT driver name


The information provided by sellers on Ebay or AliExpress is largely incorrect.
You waste time if you don't choose the right driver.
There are many variations of the 2.4 inch shield.
You can use this to find out your driver.
This is for Arduino UNO.
Do not use this on the RPI as the GPIO on the RPI is not 5V tolerant.
Never believe the seller's information.


Graphic support

ILI9341-10 ILI9341-12 ILI9341-13 ILI9341-14 ILI9341-18

Fonts support

ILI9341-11 ILI9341-15 ILI9341-16 ILI9341-17 ILI9341-19

Image support

JPEG file
ILI9341-JPEG PNG file
ILI9341-PNG


Start Auto Demo

./demo

Start Interpreter mode

You can change draw1.txt & draw2.txt & me.sh

./draw draw1.txt
./draw draw2.txt
bash ./me.sh

me_sh

Take animal picture from www.365calendar.net and display.

To use this, you need python3 and Pillow.
And reduce the security level of OpenSSL encryption.

$ sudo apt install libtiff5 libopenjp2-7
$ python -m pip install -U Pillow
$ sudo cp /usr/lib/ssl/openssl.cnf /usr/lib/ssl/openssl.cnf.old
$ sudo vi /usr/lib/ssl/openssl.cnf
#CipherString = DEFAULT@SECLEVEL=2
CipherString = DEFAULT@SECLEVEL=1
$ bash ./365calendar.sh

365calendar

Take wallpaper from bing and display

To use this, you need python3 and imagemagick.

$ sudo apt install imagemagick
$ bash ./bing_wallpaper.sh

bing_wallpaper


Wirering for 16Bit Parallel

TFT RPI
LCD_RST -- Pin#7
LCD_CS -- Pin#3
LCD_RS -- Pin#5
LCD_WR -- Pin#26
LCD_RD -- Pin#28
LCD_D0 -- Pin#29
LCD_D1 -- Pin#31
LCD_D2 -- Pin#33
LCD_D3 -- Pin#35
LCD_D4 -- Pin#37
LCD_D5 -- Pin#32
LCD_D6 -- Pin#36
LCD_D7 -- Pin#38
LCD_D8 -- Pin#13
LCD_D9 -- Pin#15
LCD_D10 -- Pin#16
LCD_D11 -- Pin#18
LCD_D12 -- Pin#8
LCD_D13 -- Pin#10
LCD_D14 -- Pin#40
LCD_D15 -- Pin#27
5V -- 5V(*)
3.3V -- 3.3V(*)
GND -- GND

*When a regulator(It's often AMS1117) is mounted on the back, it's operated 5V.
*When a regulator is NOT mounted on the back, it's operated 3.3V.

NOTE
You can change any pin.
Pin define is "pin.conf".


Build

cc -o demo demo.c fontx.c tft_lib.c driver/*.c -lwiringPi -lm -lpthread -DILI9341 -DP16BIT
cc -o draw draw.c fontx.c tft_lib.c driver/*.c -lwiringPi -lm -lpthread -DILI9341 -DP16BIT


Start Auto Demo

./demo

ili9341-16bit-1

ili9341-16bit-2


SPI Touch Sensor

ili9341-16bit-2 This module has SPI Touch Sensor.
So you can read touch position.
Use raspi-config to enable SPI.

Wirering for SPI-Touch sensor

TFT RPI
PEN -- Pin#22(**)
T_CS -- Pin#24(**)
MOSI -- Pin#19(***)
MISO -- Pin#21(***)
CLK -- Pin#23(***)

**It's defined in the source code.
#define SPI_CHANNEL 0 // /dev/spidev0.0
//#define SPI_CHANNEL 1 // /dev/spidev0.1
#define GPIO_PEN 6

***Can't change

cc -o xpt xpt.c xpt2046.c -lwiringPi -lm -lpthread
sudo ./xpt

touch-1

And you can operate Pi using touch sensor.

cc -o touch touch.c fontx.c tft_lib.c driver/ili9341.c xpt2046.c -lwiringPi -lm -lpthread -DILI9341 -DP16BIT
sudo ./touch

touch-2


4-wire resistive touch screen

OPEN SMART products have 4-wire resistive touch screen, but Pi cannot use this because Pi cannot input analog.


JPEG Decoder

This project uses this JPEG library.
This can reduce the image to 1/2 1/4 1/8.


PNG Decoder

I ported the pngle library from here.
This can reduce the image to any size.