Merge tag 'v6.6.78-rt51' into nilrt/master/6.6

Makefile

@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 6
 PATCHLEVEL = 6
-SUBLEVEL = 77
+SUBLEVEL = 78
 EXTRAVERSION =
 NAME = Pinguïn Aangedreven
 

arch/arm/boot/dts/ti/omap/dra7-l4.dtsi

@@ -12,6 +12,7 @@
 	ranges = <0x00000000 0x4a000000 0x100000>,	/* segment 0 */
 		 <0x00100000 0x4a100000 0x100000>,	/* segment 1 */
 		 <0x00200000 0x4a200000 0x100000>;	/* segment 2 */
+	dma-ranges;
 
 	segment@0 {					/* 0x4a000000 */
 		compatible = "simple-pm-bus";
@@ -557,6 +558,7 @@
 			 <0x0007e000 0x0017e000 0x001000>,	/* ap 124 */
 			 <0x00059000 0x00159000 0x001000>,	/* ap 125 */
 			 <0x0005a000 0x0015a000 0x001000>;	/* ap 126 */
+		dma-ranges;
 
 		target-module@2000 {			/* 0x4a102000, ap 27 3c.0 */
 			compatible = "ti,sysc";

arch/arm/boot/dts/ti/omap/omap3-gta04.dtsi

@@ -446,6 +446,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <
 			&hsusb2_2_pins
+			&mcspi3hog_pins
 	>;
 
 	hsusb2_2_pins: hsusb2-2-pins {
@@ -459,6 +460,15 @@
 		>;
 	};
 
+	mcspi3hog_pins: mcspi3hog-pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25dc, PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* etk_d0 */
+			OMAP3630_CORE2_IOPAD(0x25de, PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* etk_d1 */
+			OMAP3630_CORE2_IOPAD(0x25e0, PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* etk_d2 */
+			OMAP3630_CORE2_IOPAD(0x25e2, PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* etk_d3 */
+		>;
+	};
+
 	spi_gpio_pins: spi-gpio-pinmux-pins {
 		pinctrl-single,pins = <
 			OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE4) /* clk */

arch/arm64/boot/dts/nvidia/tegra234.dtsi

@@ -1709,7 +1709,7 @@
 			compatible = "nvidia,tegra234-sce-fabric";
 			reg = <0x0 0xb600000 0x0 0x40000>;
 			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
-			status = "okay";
+			status = "disabled";
 		};
 
 		rce-fabric@be00000 {
@@ -1889,7 +1889,7 @@
 		};
 
 		dce-fabric@de00000 {
-			compatible = "nvidia,tegra234-sce-fabric";
+			compatible = "nvidia,tegra234-dce-fabric";
 			reg = <0x0 0xde00000 0x0 0x40000>;
 			interrupts = <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>;
 			status = "okay";
@@ -1912,6 +1912,8 @@
 			#redistributor-regions = <1>;
 			#interrupt-cells = <3>;
 			interrupt-controller;
+
+			#address-cells = <0>;
 		};
 
 		smmu_iso: iommu@10000000 {

arch/arm64/boot/dts/qcom/sm6115.dtsi

@@ -1667,7 +1667,7 @@
 
 		remoteproc_mpss: remoteproc@6080000 {
 			compatible = "qcom,sm6115-mpss-pas";
-			reg = <0x0 0x06080000 0x0 0x100>;
+			reg = <0x0 0x06080000 0x0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 307 IRQ_TYPE_EDGE_RISING>,
 					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -2310,9 +2310,9 @@
 			};
 		};
 
-		remoteproc_adsp: remoteproc@ab00000 {
+		remoteproc_adsp: remoteproc@a400000 {
 			compatible = "qcom,sm6115-adsp-pas";
-			reg = <0x0 0x0ab00000 0x0 0x100>;
+			reg = <0x0 0x0a400000 0x0 0x4040>;
 
 			interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_EDGE_RISING>,
 					      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -2384,7 +2384,7 @@
 
 		remoteproc_cdsp: remoteproc@b300000 {
 			compatible = "qcom,sm6115-cdsp-pas";
-			reg = <0x0 0x0b300000 0x0 0x100000>;
+			reg = <0x0 0x0b300000 0x0 0x4040>;
 
 			interrupts-extended = <&intc GIC_SPI 265 IRQ_TYPE_EDGE_RISING>,
 					      <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,

arch/arm64/boot/dts/qcom/sm6350.dtsi

@@ -935,7 +935,7 @@
 				power-domains = <&rpmhpd SM6350_CX>;
 				operating-points-v2 = <&qup_opp_table>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
-						<&aggre1_noc MASTER_QUP_0 0 &clk_virt SLAVE_EBI_CH0 0>;
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
 				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
@@ -1259,7 +1259,7 @@
 
 		adsp: remoteproc@3000000 {
 			compatible = "qcom,sm6350-adsp-pas";
-			reg = <0 0x03000000 0 0x100>;
+			reg = <0x0 0x03000000 0x0 0x10000>;
 
 			interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
 					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -1480,7 +1480,7 @@
 
 		mpss: remoteproc@4080000 {
 			compatible = "qcom,sm6350-mpss-pas";
-			reg = <0x0 0x04080000 0x0 0x4040>;
+			reg = <0x0 0x04080000 0x0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_EDGE_RISING>,
 					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,

arch/arm64/boot/dts/qcom/sm6375.dtsi

@@ -1471,9 +1471,9 @@
 			#power-domain-cells = <1>;
 		};
 
-		remoteproc_mss: remoteproc@6000000 {
+		remoteproc_mss: remoteproc@6080000 {
 			compatible = "qcom,sm6375-mpss-pas";
-			reg = <0 0x06000000 0 0x4040>;
+			reg = <0x0 0x06080000 0x0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 307 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -1514,7 +1514,7 @@
 
 		remoteproc_adsp: remoteproc@a400000 {
 			compatible = "qcom,sm6375-adsp-pas";
-			reg = <0 0x0a400000 0 0x100>;
+			reg = <0 0x0a400000 0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
 					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -1550,9 +1550,9 @@
 			};
 		};
 
-		remoteproc_cdsp: remoteproc@b000000 {
+		remoteproc_cdsp: remoteproc@b300000 {
 			compatible = "qcom,sm6375-cdsp-pas";
-			reg = <0x0 0x0b000000 0x0 0x100000>;
+			reg = <0x0 0x0b300000 0x0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 265 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,