Merge branch 'marlin-moe-zero-points' into awq_moe

.buildkite/lm-eval-harness/configs/Meta-Llama-3-8B-Instruct-INT8-compressed-tensors-asym.yaml

@@ -0,0 +1,11 @@
+# bash .buildkite/lm-eval-harness/run-lm-eval-gsm-vllm-baseline.sh -m nm-testing/Meta-Llama-3-8B-Instruct-W8-Channel-A8-Dynamic-Asym-Per-Token-Test -b "auto" -l 250 -f 5 -t 1
+model_name: "nm-testing/Meta-Llama-3-8B-Instruct-W8-Channel-A8-Dynamic-Asym-Per-Token-Test"
+tasks:
+- name: "gsm8k"
+  metrics:
+  - name: "exact_match,strict-match"
+    value: 0.764
+  - name: "exact_match,flexible-extract"
+    value: 0.764
+limit: 250
+num_fewshot: 5

.buildkite/lm-eval-harness/configs/models-small.txt

@@ -1,6 +1,7 @@
 Meta-Llama-3-8B-Instruct.yaml
 Meta-Llama-3-8B-Instruct-FP8-compressed-tensors.yaml
 Meta-Llama-3-8B-Instruct-INT8-compressed-tensors.yaml
+Meta-Llama-3-8B-Instruct-INT8-compressed-tensors-asym.yaml
 Meta-Llama-3-8B-Instruct-nonuniform-compressed-tensors.yaml
 Meta-Llama-3-8B-Instruct-Channelwise-compressed-tensors.yaml
 Minitron-4B-Base-FP8.yaml

.buildkite/lm-eval-harness/test_lm_eval_correctness.py

@@ -49,10 +49,15 @@ def test_lm_eval_correctness():
     results = launch_lm_eval(eval_config)
 
     # Confirm scores match ground truth.
+    success = True
     for task in eval_config["tasks"]:
         for metric in task["metrics"]:
             ground_truth = metric["value"]
             measured_value = results["results"][task["name"]][metric["name"]]
             print(f'{task["name"]} | {metric["name"]}: '
                   f'ground_truth={ground_truth} | measured={measured_value}')
-            assert numpy.isclose(ground_truth, measured_value, rtol=RTOL)
+            success = success and numpy.isclose(
+                ground_truth, measured_value, rtol=RTOL)
+
+    # Assert at the end, print all scores even on failure for debugging.
+    assert success

.buildkite/nightly-benchmarks/benchmark-pipeline.yaml

@@ -8,8 +8,7 @@ steps:
           containers:
           - image: badouralix/curl-jq
             command:
-            - sh
-            - .buildkite/nightly-benchmarks/scripts/wait-for-image.sh
+            - sh .buildkite/nightly-benchmarks/scripts/wait-for-image.sh
   - wait
   - label: "A100"
     agents:

.buildkite/nightly-benchmarks/scripts/wait-for-image.sh

@@ -2,9 +2,11 @@
 TOKEN=$(curl -s -L "https://public.ecr.aws/token?service=public.ecr.aws&scope=repository:q9t5s3a7/vllm-ci-test-repo:pull" | jq -r .token)
 URL="https://public.ecr.aws/v2/q9t5s3a7/vllm-ci-test-repo/manifests/$BUILDKITE_COMMIT"
 
+TIMEOUT_SECONDS=10
+
 retries=0
 while [ $retries -lt 1000 ]; do
-    if [ $(curl -s -L -H "Authorization: Bearer $TOKEN" -o /dev/null -w "%{http_code}" $URL) -eq 200 ]; then
+    if [ $(curl -s --max-time $TIMEOUT_SECONDS -L -H "Authorization: Bearer $TOKEN" -o /dev/null -w "%{http_code}" $URL) -eq 200 ]; then
         exit 0
     fi
 

.buildkite/release-pipeline.yaml

@@ -8,8 +8,9 @@ steps:
       - "docker run --rm -v $(pwd)/artifacts:/artifacts_host vllm-ci:build-image bash -c 'cp -r dist /artifacts_host && chmod -R a+rw /artifacts_host'"
       # rename the files to change linux -> manylinux1
       - "for f in artifacts/dist/*.whl; do mv -- \"$$f\" \"$${f/linux/manylinux1}\"; done"
-      - "aws s3 cp --recursive artifacts/dist s3://vllm-wheels/$BUILDKITE_COMMIT/"
-      - "aws s3 cp --recursive artifacts/dist s3://vllm-wheels/nightly/"
+      - "mv artifacts/dist/$(ls artifacts/dist) artifacts/dist/vllm-1.0.0.dev-cp38-abi3-manylinux1_x86_64.whl"
+      - "aws s3 cp artifacts/dist/vllm-1.0.0.dev-cp38-abi3-manylinux1_x86_64.whl s3://vllm-wheels/$BUILDKITE_COMMIT/vllm-1.0.0.dev-cp38-abi3-manylinux1_x86_64.whl"
+      - "aws s3 cp artifacts/dist/vllm-1.0.0.dev-cp38-abi3-manylinux1_x86_64.whl s3://vllm-wheels/nightly/vllm-1.0.0.dev-cp38-abi3-manylinux1_x86_64.whl"
     env:
       DOCKER_BUILDKIT: "1"
 

.buildkite/run-amd-test.sh

@@ -71,13 +71,47 @@ mkdir -p ${HF_CACHE}
 HF_MOUNT="/root/.cache/huggingface"
 
 commands=$@
+echo "Commands:$commands"
+#ignore certain kernels tests
+if [[ $commands == *" kernels "* ]]; then
+  commands="${commands} \
+  --ignore=kernels/test_attention.py \
+  --ignore=kernels/test_attention_selector.py \
+  --ignore=kernels/test_blocksparse_attention.py \
+  --ignore=kernels/test_causal_conv1d.py \
+  --ignore=kernels/test_cutlass.py \
+  --ignore=kernels/test_encoder_decoder_attn.py \
+  --ignore=kernels/test_flash_attn.py \
+  --ignore=kernels/test_flashinfer.py \
+  --ignore=kernels/test_gguf.py \
+  --ignore=kernels/test_int8_quant.py \
+  --ignore=kernels/test_machete_gemm.py \
+  --ignore=kernels/test_mamba_ssm.py \
+  --ignore=kernels/test_marlin_gemm.py \
+  --ignore=kernels/test_moe.py \
+  --ignore=kernels/test_prefix_prefill.py \
+  --ignore=kernels/test_rand.py \
+  --ignore=kernels/test_sampler.py"
+fi
+
+#ignore certain Entrypoints tests
+if [[ $commands == *" entrypoints/openai "* ]]; then
+  commands=${commands//" entrypoints/openai "/" entrypoints/openai \
+  --ignore=entrypoints/openai/test_accuracy.py \
+  --ignore=entrypoints/openai/test_audio.py \
+  --ignore=entrypoints/openai/test_encoder_decoder.py \
+  --ignore=entrypoints/openai/test_embedding.py \
+  --ignore=entrypoints/openai/test_oot_registration.py "}
+fi
+
 PARALLEL_JOB_COUNT=8
 # check if the command contains shard flag, we will run all shards in parallel because the host have 8 GPUs. 
 if [[ $commands == *"--shard-id="* ]]; then
   for GPU in $(seq 0 $(($PARALLEL_JOB_COUNT-1))); do
     #replace shard arguments
-    commands=${@//"--shard-id= "/"--shard-id=${GPU} "}
+    commands=${commands//"--shard-id= "/"--shard-id=${GPU} "}
     commands=${commands//"--num-shards= "/"--num-shards=${PARALLEL_JOB_COUNT} "}
+    echo "Shard ${GPU} commands:$commands"
     docker run \
         --device /dev/kfd --device /dev/dri \
         --network host \

.buildkite/run-cpu-test-ppc64le.sh

@@ -11,8 +11,9 @@ trap remove_docker_container EXIT
 remove_docker_container
 
 # Run the image, setting --shm-size=4g for tensor parallel.
+source /etc/environment
 #docker run -itd --entrypoint /bin/bash -v ~/.cache/huggingface:/root/.cache/huggingface --privileged=true --network host -e HF_TOKEN --env VLLM_CPU_KVCACHE_SPACE=4 --shm-size=4g --name cpu-test cpu-test
-docker run -itd --entrypoint /bin/bash -v ~/.cache/huggingface:/root/.cache/huggingface --privileged=true --network host -e HF_TOKEN --name cpu-test cpu-test
+docker run -itd --entrypoint /bin/bash -v ~/.cache/huggingface:/root/.cache/huggingface --privileged=true --network host -e HF_TOKEN=$HF_TOKEN --name cpu-test cpu-test
 
 # Run basic model test
 docker exec cpu-test bash -c "

.buildkite/run-cpu-test.sh

@@ -22,13 +22,17 @@ docker exec cpu-test-avx2 bash -c "python3 examples/offline_inference.py"
 
 # Run basic model test
 docker exec cpu-test bash -c "
-  pip install pytest matplotlib einops transformers_stream_generator
-  pytest -v -s tests/models -m \"not vlm\" --ignore=tests/models/test_embedding.py \
-      --ignore=tests/models/test_oot_registration.py \
-      --ignore=tests/models/test_registry.py \
-      --ignore=tests/models/test_fp8.py \
-      --ignore=tests/models/test_jamba.py \
-      --ignore=tests/models/test_danube3_4b.py" # Mamba and Danube3-4B on CPU is not supported
+  pip install pytest matplotlib einops transformers_stream_generator datamodel_code_generator
+  pytest -v -s tests/models/decoder_only/language \
+    --ignore=tests/models/test_fp8.py \
+    --ignore=tests/models/decoder_only/language/test_jamba.py \
+    --ignore=tests/models/decoder_only/language/test_danube3_4b.py" # Mamba and Danube3-4B on CPU is not supported
+
+# Run compressed-tensor test
+docker exec cpu-test bash -c "
+  pytest -s -v \
+  tests/quantization/test_compressed_tensors.py::test_compressed_tensors_w8a8_static_setup \
+  tests/quantization/test_compressed_tensors.py::test_compressed_tensors_w8a8_dynanmic_per_token"
 
 # online inference
 docker exec cpu-test bash -c "

.buildkite/run-xpu-test.sh

@@ -11,4 +11,4 @@ trap remove_docker_container EXIT
 remove_docker_container
 
 # Run the image and launch offline inference
-docker run --network host --name xpu-test --device /dev/dri -v /dev/dri/by-path:/dev/dri/by-path xpu-test python3 examples/offline_inference.py
+docker run --network host --name xpu-test --device /dev/dri -v /dev/dri/by-path:/dev/dri/by-path --entrypoint="" xpu-test python3 examples/offline_inference.py