Merge pull request #654 from jphickey/fix-652-osal-config

Fix #652, cmake-based OSAL config

cmake/arch_build.cmake

@@ -259,12 +259,18 @@ endfunction(cfs_app_do_install)
 #
 function(prepare)
 
-  # Generate the "osconfig.h" wrapper file as indicated by the configuration
-  # If specific system config options were not specified, use defaults
-  if (NOT OSAL_SYSTEM_OSCONFIG)
-    set(OSAL_SYSTEM_OSCONFIG default)
-  endif (NOT OSAL_SYSTEM_OSCONFIG)    
-  generate_config_includefile("inc/osconfig.h" osconfig.h ${OSAL_SYSTEM_OSCONFIG} ${TARGETSYSTEM})
+  # Choose the configuration file to use for OSAL on this system
+  set(OSAL_CONFIGURATION_FILE)
+  if (EXISTS "${MISSION_DEFS}/default_osconfig.cmake")
+    list(APPEND OSAL_CONFIGURATION_FILE "${MISSION_DEFS}/default_osconfig.cmake")
+  endif()
+  if (DEFINED OSAL_SYSTEM_OSCONFIG AND EXISTS "${MISSION_DEFS}/${OSAL_SYSTEM_OSCONFIG}_osconfig.cmake")
+    list(APPEND OSAL_CONFIGURATION_FILE "${MISSION_DEFS}/${OSAL_SYSTEM_OSCONFIG}_osconfig.cmake")
+  endif()
+  if (EXISTS "${MISSION_DEFS}/${TARGETSYSTEM}_osconfig.cmake")
+    list(APPEND OSAL_CONFIGURATION_FILE "${MISSION_DEFS}/${TARGETSYSTEM}_osconfig.cmake")
+  endif()
+  set(OSAL_CONFIGURATION_FILE ${OSAL_CONFIGURATION_FILE} PARENT_SCOPE)
 
   # Allow sources to "ifdef" certain things if running on simulated hardware
   # This should be used sparingly, typically to fake access to hardware that is not present

cmake/sample_defs/default_osconfig.cmake

@@ -0,0 +1,222 @@
+#
+# 
+#    Copyright (c) 2020, United States government as represented by the
+#    administrator of the National Aeronautics Space Administration.
+#    All rights reserved. This software was created at NASA Goddard
+#    Space Flight Center pursuant to government contracts.
+# 
+#    This is governed by the NASA Open Source Agreement and may be used,
+#    distributed and modified only according to the terms of that agreement.
+# 
+#
+
+##########################################################################
+#
+# CFE configuration options for OSAL
+#
+# This file specifies the default values for various compile-time options
+# supported by OSAL.  These options can be further tuned by the specific
+# OSAL and BSP selection, as well as the user application.
+#
+##########################################################################
+
+
+##############################################################
+# Code/Feature Selection Options for the OSAL implementation
+##############################################################
+
+
+# OSAL_CONFIG_INCLUDE_NETWORK
+# ----------------------------------
+#
+# Whether to include the Network API
+#
+# If set TRUE, the the socket abstraction (if applicable on the platform)
+# will be included.  If set FALSE, then all calls to the network API will
+# return OS_ERR_NOT_IMPLEMENTED.
+#
+# This can be set FALSE for platforms which do not have a network or
+# IP stack available, or to save code space if the application does
+# not use network resources.
+#
+set(OSAL_CONFIG_INCLUDE_NETWORK                 TRUE)
+
+
+#
+# OSAL_CONFIG_INCLUDE_DYNAMIC_LOADER
+# ----------------------------------
+#
+# Whether to include the capability of loading dynamic code objects
+#
+# This is normally set TRUE to support modularized applications on
+# platforms which have this capability.
+#
+# For deployments which are always statically linked, this may be set
+# FALSE for a smaller library size and reduced linking requirements.
+#
+set(OSAL_CONFIG_INCLUDE_DYNAMIC_LOADER          TRUE)
+
+
+#
+# OSAL_CONFIG_INCLUDE_STATIC_LOADER
+# ----------------------------------
+#
+# Whether to include a compatibility "loader" for statically-linked objects
+#
+# This feature allows applications normally written for dynamic module loading
+# operate transparently in a static link environment.  If this is set TRUE,
+# then the application must supply an object named "OS_STATIC_SYMBOL_TABLE" that
+# contains the names and addresses of statically-linked symbols that should
+# be known to the lookup/load functions.
+#
+# Note that modules "loaded" using this abstraction are still assigned a
+# module ID and still require a slot in the module table even though
+# no actual runtime loading is performed (see OSAL_CONFIG_MAX_MODULES).
+#
+set(OSAL_CONFIG_INCLUDE_STATIC_LOADER           TRUE)
+
+#
+# OSAL_CONFIG_INCLUDE_SHELL
+# ----------------------------------
+#
+# Whether to include features which utilize the operating system shell.
+#
+# Remote Shell commands can be very powerful tool for remotely diagnosing
+# and mitigating runtime issues in the field, but also have significant
+# security implications.  If this is set to "false" then shell functionality
+# is disabled and OSAL functions which invoke the shell will return
+# OS_ERR_NOT_IMPLEMENTED.
+#
+set(OSAL_CONFIG_INCLUDE_SHELL                   FALSE)
+
+
+#
+# OSAL_CONFIG_DEBUG_PERMISSIVE_MODE
+# ----------------------------------
+#
+# The OSAL_CONFIG_DEBUG_PERMISSIVE_MODE option controls how privileged operations
+# are handled by the OSAL in the event that the user does not have sufficient permission.
+# In particular this applies to task priorities and message queues.
+#
+# If set FALSE, then all permissions are enforced, and a failure due to lack of permission
+# will cause a failure of the overall operation, which is passed back to the application.
+#
+# If set to TRUE, this will treat some errors non-fatal and enable a graceful fallback,
+# allowing the overall operation to complete in a reduced form.  This makes the
+# OSAL library compatible with a non-root (normal user mode) environment.
+#
+# In the PC-Linux/Posix build, this means:
+#  - A message queue deeper than the maximum system limit will be silently truncated
+#    to the maximum system limit (no error).
+#  - If the user does not have permission to create elevated priority tasks, then the tasks will
+#    be created at the default priority (no error).
+#
+set(OSAL_CONFIG_DEBUG_PERMISSIVE_MODE           TRUE)
+
+#
+# OSAL_CONFIG_DEBUG_PRINTF
+# ----------------------------------
+#
+# Controls inclusion of OS_DEBUG statements in the code
+#
+# If set FALSE, all OS_DEBUG statements are compiled out.
+#
+# If set TRUE, all the "OS_DEBUG" statements will be compiled in and displayed
+# on the debug console.  The statements may still be suppressed at runtime.
+#
+set(OSAL_CONFIG_DEBUG_PRINTF                    TRUE)
+
+
+#############################################
+# Resource Limits for the OS API
+#############################################
+
+# The maximum number of concurrently-running tasks to support
+set(OSAL_CONFIG_MAX_TASKS               64)
+
+# The maximum number of queues to support
+set(OSAL_CONFIG_MAX_QUEUES              64)
+
+# The maximum number of counting semaphores to support
+set(OSAL_CONFIG_MAX_COUNT_SEMAPHORES    20)
+
+# The maximum number of binary semaphores to support
+set(OSAL_CONFIG_MAX_BIN_SEMAPHORES      20)
+
+# The maximum number of mutexes to support
+set(OSAL_CONFIG_MAX_MUTEXES             20)
+
+# The maximum number of loadable modules to support
+# Note that emulating module loading for statically-linked objects also
+# requires a slot in this table, as it still assigns an OSAL ID.
+set(OSAL_CONFIG_MAX_MODULES             20)
+
+# The maximum number of time base objects (reference for timers)
+set(OSAL_CONFIG_MAX_TIMEBASES           5)
+
+# The maximum number of user timers / app callbacks that can be registered
+set(OSAL_CONFIG_MAX_TIMERS              10)
+
+# The maximum number of concurrently open file descriptors to support
+set(OSAL_CONFIG_MAX_NUM_OPEN_FILES      50)
+
+# The maximum number of concurrently open directory descriptors to support
+set(OSAL_CONFIG_MAX_NUM_OPEN_DIRS       4)
+
+# The maximum number of file systems that can be managed by OSAL
+set(OSAL_CONFIG_MAX_FILE_SYSTEMS        14)
+
+# The maximum length for a file name, including any extension
+# (This does not include the directory part)
+# This length must include an extra character for NULL termination.
+set(OSAL_CONFIG_MAX_FILE_NAME           20)
+
+# Maximum length for an virtual path name (virtual directory + file)
+# This length must include an extra character for NULL termination.
+set(OSAL_CONFIG_MAX_PATH_LEN            64)
+
+# Maximum length allowed for a object (task,queue....) name
+# This length must include an extra character for NULL termination.
+set(OSAL_CONFIG_MAX_API_NAME            20)
+
+# Maximum length of a symbol name for OS_SymbolLookup()
+# This length must include an extra character for NULL termination.
+set(OSAL_CONFIG_MAX_SYM_LEN             64)
+
+# Maximum length of a network socket address
+# This is only relevant if network support is included, and the
+# required length depends on the address families in use
+set(OSAL_CONFIG_SOCKADDR_MAX_LEN        28)
+
+# Maximum length of a single message produced by OS_printf()
+set(OSAL_CONFIG_PRINTF_BUFFER_SIZE      172)
+
+# Maximum number of OS_printf() messages that will be buffered
+set(OSAL_CONFIG_PRINTF_BUFFER_DEPTH     100)
+
+# Priority level of a console output helper task
+#
+# Set logically low (high number) to maximize performance.
+#   - Messages from OS_printf() may show on the console with some delay
+#     but should have minimal impact to real time tasks.
+#
+# Set logically high (low number) for debugging
+#   - Messages from OS_printf() will have more timely output, but may
+#     adversely impact real time tasks.
+set(OSAL_CONFIG_UTILITYTASK_PRIORITY    245)
+
+# Stack size of console output task.
+#
+# This applies to RTOS layers with precise stack control,
+# normally not necessary to change this unless the task implementation
+# changes.
+set(OSAL_CONFIG_UTILITYTASK_STACK_SIZE  2048)
+
+# The size of a command that can be passed to the underlying OS
+# This length must include an extra character for NULL termination.
+set(OSAL_CONFIG_MAX_CMD_LEN             1000)
+
+# The maximum depth of an OSAL message queue.
+# On some implementations this may affect the overall OSAL memory footprint
+# so it may be beneficial to set this limit accordingly.
+set(OSAL_CONFIG_QUEUE_MAX_DEPTH         50)