F3D FILE IS ALWAYS UP TO DATE!

VORON 2.4, 150mm (single) skirt build

THIS BUILD USES: 6020Fan / 6025Fan, BTT Octopus 1.1, UHP350-24 (full dc build) & Raspberry pi 3b/4b.

Many if not all stls need to have their orientation adjusted in slicer.

The only difference between the voron builds are the skirt sizes, sadly, i could not find skirts for 150mm builds anywhere online so i made my own. These skirts where designed for 2020 I-type extrusions with 5mm width, this means they will work on pretty much any 2020 extrusion, however, there might be alignment issues as the indexing parts are 5mm wide instead of 6mm.

Note that these are not official skirts and are heavily inspired by the stock skirts designed by RFC. Note that these skirts do NOT host a mount for any display, the files may be edited so such can be used.

The front skirt hosts a single 6020 fan. All panels sizes are the same as the voron 2.4 configurator suggets for 150mm^3 size.

PSU & INLET:
INLET
PSU

Made by Sebbe#2647 on the Voron discord.