tgupdate: merge t/upstream base into t/upstream

Documentation/networking/ethtool-netlink.rst

@@ -208,6 +208,8 @@ Userspace to kernel:
   ``ETHTOOL_MSG_CABLE_TEST_ACT``        action start cable test
   ``ETHTOOL_MSG_CABLE_TEST_TDR_ACT``    action start raw TDR cable test
   ``ETHTOOL_MSG_TUNNEL_INFO_GET``       get tunnel offload info
+  ``ETHTOOL_MSG_FEC_GET``               get FEC settings
+  ``ETHTOOL_MSG_FEC_SET``               set FEC settings
   ===================================== ================================
 
 Kernel to userspace:
@@ -242,6 +244,8 @@ Kernel to userspace:
   ``ETHTOOL_MSG_CABLE_TEST_NTF``        Cable test results
   ``ETHTOOL_MSG_CABLE_TEST_TDR_NTF``    Cable test TDR results
   ``ETHTOOL_MSG_TUNNEL_INFO_GET_REPLY`` tunnel offload info
+  ``ETHTOOL_MSG_FEC_GET_REPLY``         FEC settings
+  ``ETHTOOL_MSG_FEC_NTF``               FEC settings
   ===================================== =================================
 
 ``GET`` requests are sent by userspace applications to retrieve device
@@ -1280,6 +1284,60 @@ Kernel response contents:
 For UDP tunnel table empty ``ETHTOOL_A_TUNNEL_UDP_TABLE_TYPES`` indicates that
 the table contains static entries, hard-coded by the NIC.
 
+FEC_GET
+=======
+
+Gets FEC configuration and state like ``ETHTOOL_GFECPARAM`` ioctl request.
+
+Request contents:
+
+  =====================================  ======  ==========================
+  ``ETHTOOL_A_FEC_HEADER``               nested  request header
+  =====================================  ======  ==========================
+
+Kernel response contents:
+
+  =====================================  ======  ==========================
+  ``ETHTOOL_A_FEC_HEADER``               nested  request header
+  ``ETHTOOL_A_FEC_MODES``                bitset  configured modes
+  ``ETHTOOL_A_FEC_AUTO``                 bool    FEC mode auto selection
+  ``ETHTOOL_A_FEC_ACTIVE``               u32     index of active FEC mode
+  =====================================  ======  ==========================
+
+``ETHTOOL_A_FEC_ACTIVE`` is the bit index of the FEC link mode currently
+active on the interface. This attribute may not be present if device does
+not support FEC.
+
+``ETHTOOL_A_FEC_MODES`` and ``ETHTOOL_A_FEC_AUTO`` are only meaningful when
+autonegotiation is disabled. If ``ETHTOOL_A_FEC_AUTO`` is non-zero driver will
+select the FEC mode automatically based on the parameters of the SFP module.
+This is equivalent to the ``ETHTOOL_FEC_AUTO`` bit of the ioctl interface.
+``ETHTOOL_A_FEC_MODES`` carry the current FEC configuration using link mode
+bits (rather than old ``ETHTOOL_FEC_*`` bits).
+
+FEC_SET
+=======
+
+Sets FEC parameters like ``ETHTOOL_SFECPARAM`` ioctl request.
+
+Request contents:
+
+  =====================================  ======  ==========================
+  ``ETHTOOL_A_FEC_HEADER``               nested  request header
+  ``ETHTOOL_A_FEC_MODES``                bitset  configured modes
+  ``ETHTOOL_A_FEC_AUTO``                 bool    FEC mode auto selection
+  =====================================  ======  ==========================
+
+``FEC_SET`` is only meaningful when autonegotiation is disabled. Otherwise
+FEC mode is selected as part of autonegotiation.
+
+``ETHTOOL_A_FEC_MODES`` selects which FEC mode should be used. It's recommended
+to set only one bit, if multiple bits are set driver may choose between them
+in an implementation specific way.
+
+``ETHTOOL_A_FEC_AUTO`` requests the driver to choose FEC mode based on SFP
+module parameters. This does not mean autonegotiation.
+
 Request translation
 ===================
 
@@ -1373,8 +1431,8 @@ are netlink only.
                                       ``ETHTOOL_MSG_LINKMODES_SET``
   ``ETHTOOL_PHY_GTUNABLE``            n/a
   ``ETHTOOL_PHY_STUNABLE``            n/a
-  ``ETHTOOL_GFECPARAM``               n/a
-  ``ETHTOOL_SFECPARAM``               n/a
+  ``ETHTOOL_GFECPARAM``               ``ETHTOOL_MSG_FEC_GET``
+  ``ETHTOOL_SFECPARAM``               ``ETHTOOL_MSG_FEC_SET``
   n/a                                 ''ETHTOOL_MSG_CABLE_TEST_ACT''
   n/a                                 ''ETHTOOL_MSG_CABLE_TEST_TDR_ACT''
   n/a                                 ``ETHTOOL_MSG_TUNNEL_INFO_GET``

drivers/net/ethernet/amazon/ena/ena_com.c

@@ -863,7 +863,7 @@ static u32 ena_com_reg_bar_read32(struct ena_com_dev *ena_dev, u16 offset)
 
 	if (unlikely(i == timeout)) {
 		netdev_err(ena_dev->net_device,
-			   "Reading reg failed for timeout. expected: req id[%hu] offset[%hu] actual: req id[%hu] offset[%hu]\n",
+			   "Reading reg failed for timeout. expected: req id[%u] offset[%u] actual: req id[%u] offset[%u]\n",
 			   mmio_read->seq_num, offset, read_resp->req_id,
 			   read_resp->reg_off);
 		ret = ENA_MMIO_READ_TIMEOUT;
@@ -2396,7 +2396,7 @@ int ena_com_fill_hash_function(struct ena_com_dev *ena_dev,
 		if (key) {
 			if (key_len != sizeof(hash_key->key)) {
 				netdev_err(ena_dev->net_device,
-					   "key len (%hu) doesn't equal the supported size (%zu)\n",
+					   "key len (%u) doesn't equal the supported size (%zu)\n",
 					   key_len, sizeof(hash_key->key));
 				return -EINVAL;
 			}

drivers/net/ethernet/amazon/ena/ena_netdev.c

@@ -3975,7 +3975,7 @@ static u32 ena_calc_max_io_queue_num(struct pci_dev *pdev,
 	max_num_io_queues = min_t(u32, max_num_io_queues, io_rx_num);
 	max_num_io_queues = min_t(u32, max_num_io_queues, io_tx_sq_num);
 	max_num_io_queues = min_t(u32, max_num_io_queues, io_tx_cq_num);
-	/* 1 IRQ for for mgmnt and 1 IRQs for each IO direction */
+	/* 1 IRQ for mgmnt and 1 IRQs for each IO direction */
 	max_num_io_queues = min_t(u32, max_num_io_queues, pci_msix_vec_count(pdev) - 1);
 	if (unlikely(!max_num_io_queues)) {
 		dev_err(&pdev->dev, "The device doesn't have io queues\n");