#/* README IS A WORK IN PROGRESS */
#/* How to use this library */ *
- no idea right now :p
#/Files used for testing purposes/
- main.c
- IO.c
- IO.h
#/Files to be used for general library/firmware/
- SPI.h
- SPI.c
- nRF24.h
- nRF24.c - using
- CONFIG.h - contains comments that will define desired modes from the PIC24 device, ie: master-recieve, master-transmit, or slave configurations(only used for SPI)
- delay.c - used within nRF24.c to allow wait times after packets are sent/received, or after adjusting register settings
- delay.h
- nRF24L01.h - container for all macros(for register addresses or instruction set) found on the nRF24L0(1) data sheet (also found within this repository for reference)