Macosx Builder Setup
As of Q4 2011, Mixxx supports Mac OS X 10.5 and higher on i386, x86_64, and PPC. Mac OS 10.4 is no longer supported.
To see the supported version of each library for a given Mixxx version, see dependencies.
Thanks to the Mumble project for helping us figure out how to do a lot of this.
This entire process is now migrated to actual scripts in our buildserver repository. You can view these scripts here: Mac OS X Builder Setup Scripts
This document assumes you are untarring the source to a directory such
as ~/build. The goal of this document is to prepare a root directory
that looks like /usr/local (e.g. a directory with bin, lib, and
include folders) which has all of Mixxx's dependencies compiled and
installed to it. When compiling Mixxx, simply provide this directory
($MIXXX_PREFIX) to scons via the osxlib argument. This guide also
assumes you have archives of each source dependency stored in a folder
named dependencies located one level above your build directory.
For ease of maintaining multiple build environments (e.g. different
versions of Mixxx were released with different library versions) our
convention is to install all dependencies to $OSX_SDK/usr/local/XXX
where XXX is the name of the environment. For example, we call a 10.5
universal build environment for Mixxx 1.11 universal-1.11, and it's
located in /Developer/SDKs/MacOSX10.5.sdk/usr/local/universal-1.11. If
you are setting up your own build environment and don't care about this,
you could just set your $MIXXX_PREFIX to something standard like
/usr/local.
For ease of automation, we give ownership permission to our build
environments while building them so that we can run make install
without sudo. This allows the build to proceed without user
intervention. We literally copy/paste all the code from each section of
this document into a shell script and run it to create our build
environment. We have left sudo make install throughout this document,
but you can remove the sudo if your user role is an owner of
$MIXXX_PREFIX.
Store this file as environment.sh in your build directory.
#!/bin/bash
# If you are not building on a i386 OS X install, change this.
export HOST=i386-apple-darwin10
export TARGET_I386="i386-apple-darwin10"
export TARGET_X86_64="x86_64-apple-darwin10"
export TARGET_POWERPC="powerpc-apple-darwin10"
if [ "$1" == "i386" ]; then
export TARGET=$TARGET_I386
export ARCH_FLAGS="-arch $1"
elif [ "$1" == "x86_64" ]; then
export TARGET=$TARGET_X86_64
export ARCH_FLAGS="-arch $1"
elif [ "$1" == "ppc" ]; then
export TARGET=$TARGET_POWERPC
export ARCH_FLAGS="-arch $1"
else
# Custom $ARCH_FLAGS is set by caller.
fi
export CC="$(xcode-select -print-path)/usr/bin/gcc-4.2"
export CXX="$(xcode-select -print-path)/usr/bin/g++-4.2"
export CPP="$(xcode-select -print-path)/usr/bin/cpp-4.2"
export CXXCPP="$(xcode-select -print-path)/usr/bin/cpp-4.2"
export MACOSX_DEPLOYMENT_TARGET="10.5"
export OSX_SDK=/Developer/SDKs/MacOSX10.5.sdk
export MIXXX_PREFIX=$OSX_SDK/usr/local/universal-1.11/
export PATH=$PATH:$MIXXX_PREFIX/bin/
export COMMON_OPT_FLAGS="-O2 -ffast-math"
# Core Solo and Core Duo are the only 32-bit mac machines. These support MMX, SSE, SSE2, SSE3. -march=prescott is safe to assume
export I386_OPT_FLAGS="-mmmx -msse -msse2 -msse3 -mfpmath=sse -march=prescott -mtune=generic"
export X86_64_OPT_FLAGS="-mmmx -msse -msse2 -msse3 -mfpmath=sse -mtune=generic"
export POWERPC_OPT_FLAGS=""
export OSX_CFLAGS="-isysroot $OSX_SDK -mmacosx-version-min=$MACOSX_DEPLOYMENT_TARGET $ARCH_FLAGS $COMMON_OPT_FLAGS"
export OSX_LDFLAGS="-isysroot $OSX_SDK -Wl,-syslibroot,$OSX_SDK -mmacosx-version-min=$MACOSX_DEPLOYMENT_TARGET $ARCH_FLAGS $COMMON_OPT_FLAGS"
if [ "$1" == "i386" ]; then
echo "Setting options for $1";
export CFLAGS="$OSX_CFLAGS $I386_OPT_FLAGS"
export CXXFLAGS="$OSX_CFLAGS $I386_OPT_FLAGS"
export LDFLAGS="$OSX_LDFLAGS $I386_OPT_FLAGS"
export SHLIBFLAGS="$OSX_LDFLAGS $I386_OPT_FLAGS"
export DYLIBFLAGS="$OSX_LDFLAGS $I386_OPT_FLAGS"
elif [ "$1" == "x86_64" ]; then echo "Setting options for $1";
export CFLAGS="$OSX_CFLAGS $X86_64_OPT_FLAGS"
export CXXFLAGS="$OSX_CFLAGS $X86_64_OPT_FLAGS"
export LDFLAGS="$OSX_LDFLAGS $X86_64_OPT_FLAGS"
export SHLIBFLAGS="$OSX_LDFLAGS $X86_64_OPT_FLAGS"
export DYLIBFLAGS="$OSX_LDFLAGS $X86_64_OPT_FLAGS"
elif [ "$1" == "ppc" ]; then
echo "Setting options for $1";
export CFLAGS="$OSX_CFLAGS $POWERPC_OPT_FLAGS"
export CXXFLAGS="$OSX_CFLAGS $POWERPC_OPT_FLAGS"
export LDFLAGS="$OSX_LDFLAGS $POWERPC_OPT_FLAGS"
export SHLIBFLAGS="$OSX_LDFLAGS $POWERPC_OPT_FLAGS"
export DYLIBFLAGS="$OSX_LDFLAGS $POWERPC_OPT_FLAGS"
else
echo "ERROR: Unknown arch type, setting default."
export CFLAGS=$OSX_CFLAGS
export CXXFLAGS=$OSX_CFLAGS
export LDFLAGS=$OSX_LDFLAGS
export SHLIBFLAGS=$OSX_LDFLAGS
export DYLIBFLAGS=$OSX_LDFLAGS
fi
XCode 4 and higher does not support Mac OS X 10.5. Download and install
an XCode 3.x release suitable for your version of OS X. For Mac OS 10.6,
you will need XCode 3.2 as later versions of XCode do not support 10.6.
Try searching for the filename xcode3210a432.dmg.
After installing, remove these symbolic links as we don't want to dirty up /usr/local/lib while building libraries.
sudo rm /Developer/SDKs/MacOSX10.4.sdk/usr/local/lib
sudo rm /Developer/SDKs/MacOSX10.5.sdk/usr/local/lib
sudo rm /Developer/SDKs/MacOSX10.6.sdk/usr/local/lib
Download the latest supported version of Qt source tarball. (In Q3 2012, this is Qt 4.8.3)
Untar the archive and apply qsettings_appstore.diff from QTBUG-16549. This is to support configuring Qt for app store restrictions. Once this patch or a similar solution is in Qt this step will not be required. Without this step, the resulting packages will not pass the Mac App Store review process.
Qt 4.8.2 has a NULL-pointer dereference segfault when you do QLocale::system().uiLanguages() (WTF, right?). This is fixed in Qt 4.8.3.
--- src/corelib/tools/qlocale_mac.mm.original 2012-09-06 21:59:25.000000000 -0400
+++ src/corelib/tools/qlocale_mac.mm 2012-09-06 22:00:33.000000000 -0400
@@ -439,7 +439,7 @@
kCFPreferencesAnyApplication,
kCFPreferencesCurrentUser,
kCFPreferencesAnyHost);
- const int cnt = CFArrayGetCount(languages);
+ const int cnt = languages == NULL ? 0 : CFArrayGetCount(languages);
QStringList result;
result.reserve(cnt);
for (int i = 0; i < cnt; ++i) {
Qt 4.8.2 doesn't build on OSX SDK 10.5 without this patch: https://bugreports.qt-project.org/browse/QTBUG-23258
export VERSION=qt-everywhere-opensource-src-4.8.3
export ARCHIVE=$VERSION.tar.gz
tar -zxvf ../dependencies/$ARCHIVE
cd $VERSION
export ARCH=
# Qt gets sad if you use -arch in your CFLAGS/CXXFLAGS. For some reason it does some cutting / munging of your flags and you end up with lone '-arch' flags in your CFLAGS/CXXFLAGS which breaks the build.
export ARCH_FLAGS=
source ../environment.sh
export QTDIR=$MIXXX_PREFIX/Qt-4.8.3
# Apply patch from QTBUG-23258 to fix Qt 4.8.2 and 4.8.3 build on OS X 10.5 SDK
curl https://bugreports.qt-project.org/secure/attachment/26712/Patch-Qt-4.8-for-10.5 > Patch-Qt-4.8-for-10.5
patch -p1 < Patch-Qt-4.8-for-10.5
# Qt uses -arch x86 not -arch i386
./configure -opensource -prefix $QTDIR -arch x86 -arch x86_64 -arch ppc -sdk $OSX_SDK -plugin-sql-sqlite -platform macx-g++42 -no-qt3support -release -nomake examples -nomake demos -confirm-license
# NOTE: Using -ffast-math will fail when building SQLite so either remove -ffast-math from environment.sh temporarily or remove --fast-math from the SQLite Makefiles (you'll have to do it for QtWebkit and QtSql). You can do this as the build fails since it will complain about -ffast-math. We remove it with sed:
find src/sql -name 'Makefile*' -exec sed -i -e 's/-ffast-math //g' "{}" \;
find src/plugins/sqldrivers/sqlite -name 'Makefile*' -exec sed -i -e 's/-ffast-math //g' "{}" \;
find src/plugins/sqldrivers/sqlite2 -name 'Makefile*' -exec sed -i -e 's/-ffast-math //g' "{}" \;
find src/3rdparty/webkit/Source/WebCore -name 'Makefile*' -exec sed -i -e 's/-ffast-math //g' "{}" \;
make
sudo make install
export ARCH_FLAGS="-arch i386 -arch x86_64"
source ../environment.sh
export CC="$CC $CFLAGS"
export CXX="$CXX $CXXFLAGS"
./configure --host $HOST --target x86_64-apple-darwin10 --disable-cpplibs --disable-dependency-tracking --disable-asm-optimizations --disable-ogg --prefix=$MIXXX_PREFIX
make
sudo make install
export VERSION=flac-1.2.1
export ARCHIVE=$VERSION.tar.gz
export DYLIB=src/libFLAC/.libs/libFLAC.8.2.0.dylib
export STATICLIB=src/libFLAC/.libs/libFLAC.a
for ARCH in i386 x86_64 ppc
do
mkdir -p $VERSION-$ARCH
tar -zxvf ../dependencies/$ARCHIVE -C $VERSION-$ARCH --strip-components 1
cd $VERSION-$ARCH
source ../environment.sh $ARCH
export CC="$CC $CFLAGS"
export CXX="$CXX $CXXFLAGS"
./configure --host $HOST --target $TARGET --disable-cpplibs --disable-dependency-tracking --disable-asm-optimizations --disable-ogg --prefix=$MIXXX_PREFIX
make
cd ..
done
# Install the i386 version in case there are binaries we want to run (our host is i386)
export ARCH=i386
cd $VERSION-$ARCH
source ../environment.sh $ARCH
export CC="$CC $CFLAGS"
export CXX="$CXX $CXXFLAGS"
lipo -create ./$DYLIB ../$VERSION-ppc/$DYLIB ../$VERSION-x86_64/$DYLIB -output ./$DYLIB
lipo -create ./$STATICLIB ../$VERSION-ppc/$STATICLIB ../$VERSION-x86_64/$STATICLIB -output ./$STATICLIB
sudo make install
cd ..
export ARCH_FLAGS="-arch i386 -arch x86_64"
source ../environment.sh
export CC="$CC $CFLAGS"
export CXX="$CXX $CXXFLAGS"
./configure --host $HOST --target x86_64-apple-darwin10 --disable-dependency-tracking --prefix=$MIXXX_PREFIX
make
sudo make install
export VERSION=libsndfile-1.0.25
export ARCHIVE=$VERSION.tar.gz
export DYLIB=src/.libs/libsndfile.1.dylib
export STATICLIB=src/.libs/libsndfile.a
for ARCH in i386 x86_64 ppc
do
mkdir -p $VERSION-$ARCH
tar -zxvf ../dependencies/$ARCHIVE -C $VERSION-$ARCH --strip-components 1
cd $VERSION-$ARCH
source ../environment.sh $ARCH
./configure --host $HOST --target $TARGET --disable-dependency-tracking --prefix=$MIXXX_PREFIX
make
cd ..
done
# Install the i386 version in case there are binaries we want to run (our host is i386)
export ARCH=i386
cd $VERSION-$ARCH
source ../environment.sh $ARCH
lipo -create ./$DYLIB ../$VERSION-ppc/$DYLIB ../$VERSION-x86_64/$DYLIB -output ./$DYLIB
lipo -create ./$STATICLIB ../$VERSION-ppc/$STATICLIB ../$VERSION-x86_64/$STATICLIB -output ./$STATICLIB
sudo make install
cd ..
export ARCH_FLAGS="-arch i386 -arch x86_64"
source ../environment.sh
./configure --disable-dependency-tracking --prefix=$MIXXX_PREFIX
make
sudo make install
export VERSION=libogg-1.3.0
export ARCHIVE=$VERSION.tar.gz
export DYLIB=src/.libs/libogg.0.dylib
export STATICLIB=src/.libs/libogg.a
for ARCH in i386 x86_64 ppc
do
mkdir -p $VERSION-$ARCH
tar -zxvf ../dependencies/$ARCHIVE -C $VERSION-$ARCH --strip-components 1
cd $VERSION-$ARCH
source ../environment.sh $ARCH
./configure --host $HOST --target $TARGET --disable-dependency-tracking --prefix=$MIXXX_PREFIX
make
cd ..
done
# Install the i386 version in case there are binaries we want to run (our host is i386)
export ARCH=i386
cd $VERSION-$ARCH
source ../environment.sh $ARCH
lipo -create ./$DYLIB ../$VERSION-ppc/$DYLIB ../$VERSION-x86_64/$DYLIB -output ./$DYLIB
lipo -create ./$STATICLIB ../$VERSION-ppc/$STATICLIB ../$VERSION-x86_64/$STATICLIB -output ./$STATICLIB
sudo make install
cd ..
export ARCH_FLAGS="-arch i386 -arch x86_64"
source ../environment.sh
./configure --disable-dependency-tracking --prefix=$MIXXX_PREFIX
make
sudo make install
export VERSION=libvorbis-1.3.3
export ARCHIVE=$VERSION.tar.gz
export VORBIS_DYLIB=lib/.libs/libvorbis.0.dylib
export VORBIS_STATICLIB=lib/.libs/libvorbis.a
export VORBISENC_DYLIB=lib/.libs/libvorbisenc.2.dylib
export VORBISENC_STATICLIB=lib/.libs/libvorbisenc.a
export VORBISFILE_DYLIB=lib/.libs/libvorbisfile.3.dylib
export VORBISFILE_STATICLIB=lib/.libs/libvorbisfile.a
for ARCH in i386 x86_64 ppc
do
mkdir -p $VERSION-$ARCH
tar -zxvf ../dependencies/$ARCHIVE -C $VERSION-$ARCH --strip-components 1
cd $VERSION-$ARCH
source ../environment.sh $ARCH
./configure --host $HOST --target $TARGET --disable-dependency-tracking --prefix=$MIXXX_PREFIX
make
cd ..
done
# Install the i386 version in case there are binaries we want to run (our host is i386)
export ARCH=i386
cd $VERSION-$ARCH
source ../environment.sh $ARCH
lipo -create ./$VORBIS_DYLIB ../$VERSION-ppc/$VORBIS_DYLIB ../$VERSION-x86_64/$VORBIS_DYLIB -output ./$VORBIS_DYLIB
lipo -create ./$VORBIS_STATICLIB ../$VERSION-ppc/$VORBIS_STATICLIB ../$VERSION-x86_64/$VORBIS_STATICLIB -output ./$VORBIS_STATICLIB
lipo -create ./$VORBISENC_DYLIB ../$VERSION-ppc/$VORBISENC_DYLIB ../$VERSION-x86_64/$VORBISENC_DYLIB -output ./$VORBISENC_DYLIB
lipo -create ./$VORBISENC_STATICLIB ../$VERSION-ppc/$VORBISENC_STATICLIB ../$VERSION-x86_64/$VORBISENC_STATICLIB -output ./$VORBISENC_STATICLIB
lipo -create ./$VORBISFILE_DYLIB ../$VERSION-ppc/$VORBISFILE_DYLIB ../$VERSION-x86_64/$VORBISFILE_DYLIB -output ./$VORBISFILE_DYLIB
lipo -create ./$VORBISFILE_STATICLIB ../$VERSION-ppc/$VORBISFILE_STATICLIB ../$VERSION-x86_64/$VORBISFILE_STATICLIB -output ./$VORBISFILE_STATICLIB
sudo make install
cd ..
export ARCH_FLAGS="-arch i386 -arch x86_64"
source ../environment.sh
./configure --disable-dependency-tracking --prefix=$MIXXX_PREFIX
make
sudo make install
export VERSION=libshout-2.3.1
export ARCHIVE=$VERSION.tar.gz
export DYLIB=src/.libs/libshout.3.dylib
export STATICLIB=src/.libs/libshout.a
for ARCH in i386 x86_64 ppc
do
mkdir -p $VERSION-$ARCH
tar -zxvf ../dependencies/$ARCHIVE -C $VERSION-$ARCH --strip-components 1
cd $VERSION-$ARCH
source ../environment.sh $ARCH
./configure --host $HOST --target $TARGET --disable-dependency-tracking --prefix=$MIXXX_PREFIX
make
cd ..
done
# Install the i386 version in case there are binaries we want to run (our host is i386)
export ARCH=i386
cd $VERSION-$ARCH
source ../environment.sh $ARCH
lipo -create ./$DYLIB ../$VERSION-ppc/$DYLIB ../$VERSION-x86_64/$DYLIB -output ./$DYLIB
lipo -create ./$STATICLIB ../$VERSION-ppc/$STATICLIB ../$VERSION-x86_64/$STATICLIB -output ./$STATICLIB
sudo make install
cd ..
export ARCH_FLAGS="-arch i386 -arch x86_64"
source ../environment.sh
cmake . -DCMAKE_BUILD_TYPE=Release -DCMAKE_INSTALL_PREFIX="$MIXXX_PREFIX" -DCMAKE_OSX_DEPLOYMENT_TARGET="$MACOSX_DEPLOYMENT_TARGET" -DCMAKE_OSX_SYSROOT="$OSX_SDK" -DCMAKE_VERBOSE_MAKEFILE=TRUE -DWITH_ASF=ON -DWITH_MP4=ON
make
sudo make install
export VERSION=taglib-1.7.2
export ARCHIVE=$VERSION.tar.gz
export DYLIB=taglib/libtag.1.7.2.dylib
export STATICLIB=taglib/libtag.1.7.2.dylib
for ARCH in i386 x86_64 ppc
do
mkdir -p $VERSION-$ARCH
tar -zxvf ../dependencies/$ARCHIVE -C $VERSION-$ARCH --strip-components 1
cd $VERSION-$ARCH
source ../environment.sh $ARCH
# To build static, use -DENABLE_STATIC=ON but this turns off building a shared library.
cmake . -DCMAKE_BUILD_TYPE=Release -DCMAKE_INSTALL_PREFIX="$MIXXX_PREFIX" -DCMAKE_OSX_DEPLOYMENT_TARGET="$MACOSX_DEPLOYMENT_TARGET" -DCMAKE_OSX_SYSROOT="$OSX_SDK" -DCMAKE_VERBOSE_MAKEFILE=TRUE -DWITH_ASF=ON -DWITH_MP4=ON
make
cd ..
done
# Install the i386 version in case there are binaries we want to run (our host is i386)
export ARCH=i386
cd $VERSION-$ARCH
source ../environment.sh $ARCH
lipo -create ./$DYLIB ../$VERSION-ppc/$DYLIB ../$VERSION-x86_64/$DYLIB -output ./$DYLIB
# Taglib's build system only builds either a shared library or a dynamic one. We use the dynamic one for now.
#lipo -create ./$STATICLIB ../$VERSION-ppc/$STATICLIB ../$VERSION-x86_64/$STATICLIB -output ./$STATICLIB
sudo make install
cd ..
export ARCH_FLAGS="-arch i386 -arch x86_64"
source ../environment.sh
# As of the PA 2011/3/26 snapshot, a deprecated API function of CoreAudio is used which blocks the build due to -Werror. -Wno-deprecated-declarations allows these errors to pass.
export CFLAGS="$CFLAGS -Wno-deprecated-declarations"
export CXXFLAGS=$CFLAGS
./configure --prefix=$MIXXX_PREFIX --disable-mac-universal
make
sudo make install
export VERSION=pa_stable_v19_20111121
export ARCHIVE=$VERSION.tgz
export DYLIB=lib/.libs/libportaudio.2.dylib
export STATICLIB=lib/.libs/libportaudio.a
for ARCH in i386 x86_64 ppc
do
mkdir -p $VERSION-$ARCH
tar -zxvf ../dependencies/$ARCHIVE -C $VERSION-$ARCH --strip-components 1
cd $VERSION-$ARCH
source ../environment.sh $ARCH
# As of the PA 2011/3/26 snapshot, a deprecated API function of CoreAudio is used which blocks the build due to -Werror. -Wno-deprecated-declarations allows these errors to pass.
export CFLAGS="$CFLAGS -Wno-deprecated-declarations"
export CXXFLAGS=$CFLAGS
# Mac universal in this case includes ppc64 which we aren't supporting.
./configure --host $HOST --target $TARGET --prefix=$MIXXX_PREFIX --disable-mac-universal
make
cd ..
done
# Install the i386 version in case there are binaries we want to run (our host is i386)
export ARCH=i386
cd $VERSION-$ARCH
source ../environment.sh $ARCH
lipo -create ./$DYLIB ../$VERSION-ppc/$DYLIB ../$VERSION-x86_64/$DYLIB -output ./$DYLIB
lipo -create ./$STATICLIB ../$VERSION-ppc/$STATICLIB ../$VERSION-x86_64/$STATICLIB -output ./$STATICLIB
sudo make install
cd ..
export ARCH_FLAGS="-arch i386 -arch x86_64"
source ../environment.sh
# Edit CMakeLists.txt to manually remove ppc from the CMAKE_OSX_ARCHITECTURES variable.
cmake . -DCMAKE_INSTALL_PREFIX="$MIXXX_PREFIX" -DCMAKE_OSX_DEPLOYMENT_TARGET="$MACOSX_DEPLOYMENT_TARGET" -DCMAKE_VERBOSE_MAKEFILE=TRUE -DCMAKE_OSX_SYSROOT="$OSX_SDK"
make
sudo make install
# PortMidi insists on installing to /usr/local/lib. Just move its files to $MIXXX_PREFIX
sudo mv /usr/local/lib/libportmidi_s.a $MIXXX_PREFIX/lib
sudo mv /usr/local/lib/libpmjni.dylib $MIXXX_PREFIX/lib
sudo mv /usr/local/lib/libportmidi.dylib $MIXXX_PREFIX/lib
sudo mv /usr/local/include/portmidi.h $MIXXX_PREFIX/include
sudo mv /usr/local/include/porttime.h $MIXXX_PREFIX/include
export VERSION=portmidi-src-217
export ARCHIVE=$VERSION.zip
unzip ../dependencies/$ARCHIVE
cd portmidi
export ARCH_FLAGS="-arch i386 -arch x86_64 -arch ppc"
source ../environment.sh
# PortMIDI hard-coded ppc, i386, and x86_64 for CMAKE_OSX_ARCHITECTURES. This is what we are building in this case so no change is necessary.
cmake . -DCMAKE_BUILD_TYPE=Release -DCMAKE_INSTALL_PREFIX="$MIXXX_PREFIX" -DCMAKE_OSX_DEPLOYMENT_TARGET="$MACOSX_DEPLOYMENT_TARGET" -DCMAKE_VERBOSE_MAKEFILE=TRUE -DCMAKE_OSX_SYSROOT="$OSX_SDK" -DCMAKE_C_FLAGS="$CFLAGS" -DCMAKE_CXX_FLAGS="$CXXFLAGS" -DCMAKE_EXE_LINKER_FLAGS="$LDFLAGS" -DCMAKE_SHARED_LINKER_FLAGS="$LDFLAGS"
make
# PortMidi insists on installing to /usr/local/lib. Just move its files to $MIXXX_PREFIX
#sudo make install
cp libportmidi_s.a $MIXXX_PREFIX/lib
install_name_tool -id $MIXXX_PREFIX/lib/libportmidi.dylib libportmidi.dylib
cp libportmidi.dylib $MIXXX_PREFIX/lib
cp porttime/porttime.h $MIXXX_PREFIX/include
cp pm_common/portmidi.h $MIXXX_PREFIX/include
cd ..
bzr checkout lp:hss1394
cd hss1394
export ARCH_FLAGS="-arch i386 -arch x86_64"
source ../environment.sh
scons prefix=$MIXXX_PREFIX
# Actually, this doesn't work. Just manually copy the files.
#sudo scons prefix=$MIXXX_PREFIX install
sudo cp obj/libhss1394.dylib $MIXXX_PREFIX/lib
sudo mkdir $MIXXX_PREFIX/include/hss1394
sudo cp inc/HSS1394.h $MIXXX_PREFIX/include/hss1394
sudo cp inc/HSS1394Types.h $MIXXX_PREFIX/include/hss1394
bzr checkout lp:hss1394
cd hss1394
export ARCH_FLAGS="-arch i386 -arch x86_64 -arch ppc"
source ../environment.sh
export MACOSX_DEPLOYMENT_TARGET=
scons prefix=$MIXXX_PREFIX
# Actually, this doesn't work. Just manually copy the files.
#sudo scons prefix=$MIXXX_PREFIX install
install_name_tool -id $MIXXX_PREFIX/lib/libhss1394.dylib obj/libhss1394.dylib
sudo cp obj/libhss1394.dylib $MIXXX_PREFIX/lib
sudo mkdir $MIXXX_PREFIX/include/hss1394
sudo cp inc/HSS1394.h $MIXXX_PREFIX/include/hss1394
sudo cp inc/HSS1394Types.h $MIXXX_PREFIX/include/hss1394
cd ..
warning untested
export ARCH_FLAGS="-arch i386 -arch x86_64"
source ../environment.sh
export CC="$CC $CFLAGS"
export CXX="$CXX $CXXFLAGS"
./configure --host $HOST --target $TARGET_X86_64 --disable-dependency-tracking --prefix=$MIXXX_PREFIX
make
sudo make install
export VERSION=protobuf-2.4.1
export ARCHIVE=$VERSION.tar.gz
export PROTOBUF_DYLIB=src/.libs/libprotobuf.7.dylib
export PROTOBUF_STATICLIB=src/.libs/libprotobuf.a
export PROTOBUF_LITE_DYLIB=src/.libs/libprotobuf-lite.7.dylib
export PROTOBUF_LITE_STATICLIB=src/.libs/libprotobuf-lite.a
# Note, i386 is first so that we get a working i386 version of protoc which the ARCH's use (our host system is i386).
for ARCH in i386 x86_64 ppc
do
mkdir -p $VERSION-$ARCH
tar -zxvf ../dependencies/$ARCHIVE -C $VERSION-$ARCH --strip-components 1
cd $VERSION-$ARCH
source ../environment.sh $ARCH
if [ "$ARCH" == "i386" ]; then
./configure --host $HOST --target $TARGET --disable-dependency-tracking --prefix=$MIXXX_PREFIX
else
./configure --host $HOST --target $TARGET --disable-dependency-tracking --prefix=$MIXXX_PREFIX --with-protoc=../$VERSION-i386/src/protoc
fi
make
cd ..
done
# Install the i386 version in case there are binaries we want to run (our host is i386)
export ARCH=i386
cd $VERSION-$ARCH
source ../environment.sh $ARCH
lipo -create ./$PROTOBUF_DYLIB ../$VERSION-ppc/$PROTOBUF_DYLIB ../$VERSION-x86_64/$PROTOBUF_DYLIB -output ./$PROTOBUF_DYLIB
lipo -create ./$PROTOBUF_STATICLIB ../$VERSION-ppc/$PROTOBUF_STATICLIB ../$VERSION-x86_64/$PROTOBUF_STATICLIB -output ./$PROTOBUF_STATICLIB
lipo -create ./$PROTOBUF_LITE_DYLIB ../$VERSION-ppc/$PROTOBUF_LITE_DYLIB ../$VERSION-x86_64/$PROTOBUF_LITE_DYLIB -output ./$PROTOBUF_LITE_DYLIB
lipo -create ./$PROTOBUF_LITE_STATICLIB ../$VERSION-ppc/$PROTOBUF_LITE_STATICLIB ../$VERSION-x86_64/$PROTOBUF_LITE_STATICLIB -output ./$PROTOBUF_LITE_STATICLIB
sudo make install
cd ..
# The binary is going to be called $TARGET_I386-protoc so alias it to protoc
sudo ln -s $MIXXX_PREFIX/bin/$TARGET_I386-protoc $MIXXX_PREFIX/bin/protoc
export ARCH_FLAGS="-arch i386 -arch x86_64"
source ../environment.sh
cmake . -DCMAKE_BUILD_TYPE=Release -DCMAKE_INSTALL_PREFIX="$MIXXX_PREFIX" -DCMAKE_OSX_DEPLOYMENT_TARGET="$MACOSX_DEPLOYMENT_TARGET" -DCMAKE_OSX_SYSROOT="$OSX_SDK" -DCMAKE_VERBOSE_MAKEFILE=TRUE -DWITH_VDSP=TRUE
make
sudo make install
export VERSION=chromaprint-0.7
export ARCHIVE=$VERSION.tar.gz
export DYLIB=src/libchromaprint.0.2.0.dylib
export STATICLIB=src/libchromaprint_p.a
for ARCH in i386 x86_64 ppc
do
mkdir -p $VERSION-$ARCH
tar -zxvf ../dependencies/$ARCHIVE -C $VERSION-$ARCH --strip-components 1
cd $VERSION-$ARCH
source ../environment.sh $ARCH
cmake . -DCMAKE_BUILD_TYPE=Release -DCMAKE_INSTALL_PREFIX="$MIXXX_PREFIX" -DCMAKE_OSX_DEPLOYMENT_TARGET="$MACOSX_DEPLOYMENT_TARGET" -DCMAKE_OSX_SYSROOT="$OSX_SDK" -DCMAKE_VERBOSE_MAKEFILE=TRUE -DWITH_VDSP=TRUE
make
cd ..
done
# Install the i386 version in case there are binaries we want to run (our host is i386)
export ARCH=i386
cd $VERSION-$ARCH
source ../environment.sh $ARCH
lipo -create ./$DYLIB ../$VERSION-ppc/$DYLIB ../$VERSION-x86_64/$DYLIB -output ./$DYLIB
lipo -create ./$STATICLIB ../$VERSION-ppc/$STATICLIB ../$VERSION-x86_64/$STATICLIB -output ./$STATICLIB
sudo make install
cd ..
export VERSION=rubberband-1.8.1
export ARCHIVE=$VERSION.tar.bz2
export DYLIB=lib/librubberband.dylib
export STATICLIB=lib/librubberband.a
export DYLIB_LIST=()
export STATICLIB_LIST=()
for ARCH in i386 x86_64 ppc
do
mkdir -p $VERSION-$ARCH
tar -zxvf ../dependencies/$ARCHIVE -C $VERSION-$ARCH --strip-components 1
cd $VERSION-$ARCH
source ../environment.sh $ARCH
export LDFLAGS="$LDFLAGS -framework vecLib"
SRC_CFLAGS="-I." SRC_LIBS=" " SNDFILE_CFLAGS=" " SNDFILE_LIBS=" " FFTW_CFLAGS=" " FFTW_LIBS=" " Vamp_LIBS=" " Vamp_CFLAGS=" " ./configure --host $HOST --target $TARGET --prefix=$MIXXX_PREFIX
# Hack up the Makefile since it sucks.
sed -i -e 's/LIBRARY_INCLUDES := \\/LIBRARY_INCLUDES := src\/speex\/speex_resampler.h \\/g' Makefile
sed -i -e 's/LIBRARY_SOURCES := \\/LIBRARY_SOURCES := src\/speex\/resample.c \\/g' Makefile
sed -i -e 's/\.so/\.dylib/g' Makefile
sed -i -e 's/-Wl,-Bsymbolic //g' Makefile
sed -i -e 's/-shared.*$/-dynamiclib/g' Makefile
sed -i -e 's/-DHAVE_LIBSAMPLERATE -DHAVE_FFTW3 -DFFTW_DOUBLE_ONLY /-DHAVE_VDSP -DUSE_SPEEX -DMALLOC_IS_ALIGNED /g' Makefile
make lib
make static
make dynamic
DYLIB_LIST+=("../$VERSION-$ARCH/$DYLIB")
STATICLIB_LIST+=("../$VERSION-$ARCH/$STATICLIB")
cd ..
done
# Install the i386 version in case there are binaries we want to run (our host is i386)
export ARCH=i386
cd $VERSION-$ARCH
source ../environment.sh $ARCH
lipo -create ./$DYLIB ../$VERSION-ppc/$DYLIB ../$VERSION-x86_64/$DYLIB -output ./$DYLIB
lipo -create ./$STATICLIB ../$VERSION-ppc/$STATICLIB ../$VERSION-x86_64/$STATICLIB -output ./$STATICLIB
# We can't make install because the stupid Makefile insists on creating the VAMP plugin and the LADSPA plugin and the binary.
export RUBBERBAND_INCLUDE=${MIXXX_PREFIX}include/rubberband
export RUBBERBAND_LIB=${MIXXX_PREFIX}lib
mkdir -p $RUBBERBAND_INCLUDE
mkdir -p $RUBBERBAND_LIB
cp rubberband/rubberband-c.h rubberband/RubberBandStretcher.h $RUBBERBAND_INCLUDE
cp lib/librubberband.a lib/librubberband.dylib $RUBBERBAND_LIB
install_name_tool -id $RUBBERBAND_LIB/librubberband.dylib $RUBBERBAND_LIB/librubberband.dylib
cd ..
To test your new build environment, we will build Mixxx.
git clone https://github.com/mixxxdj/mixxx.git ./mixxx-trunk
cd mixxx-trunk/mixxx
export ARCH_FLAGS="-arch i386 -arch x86_64 -arch ppc"
source ../../environment.sh
export CFLAGS="$CFLAGS -I$MIXXX_PREFIX/include"
export CXXFLAGS="$CFLAGS -I$MIXXX_PREFIX/include"
export LDFLAGS="$LDFLAGS -L$MIXXX_PREFIX/lib -F$MIXXX_PREFIX/Qt-4.7.4/lib"
export QTDIR=$MIXXX_PREFIX/Qt-4.8.2/
# Python/SCons complains if it was built for a more modern SDK version than what you define here. It doesn't matter at this point so clear it.
export MACOSX_DEPLOYMENT_TARGET=
# qtplugindir is required until we remove hardcoding of /Developer/Applications/Qt/ from our build system :(
scons bundle package osxlib=$MIXXX_PREFIX/lib coreaudio=1 mad=0 qtplugindir=$QTDIR optimize=1
Take the DMG in the osx32_build folder and try it out on the CPUs you
built it for.
Traceback (most recent call last): File "/usr/local/bin/scons", line 95, in <module>
import pkg_resources File "/System/Library/Frameworks/Python.framework/Versions/2.6/Extras/lib/python/pkg_resources.py", line 651, in <module> class Environment(object):
File "/System/Library/Frameworks/Python.framework/Versions/2.6/Extras/lib/python/pkg_resources.py", line 654, in Environment
def __init__(self, search_path=None, platform=get_supported_platform(), python=PY_MAJOR):
File "/System/Library/Frameworks/Python.framework/Versions/2.6/Extras/lib/python/pkg_resources.py", line 55, in get_supported_platform
plat = get_build_platform(); m = macosVersionString.match(plat)
File "/System/Library/Frameworks/Python.framework/Versions/2.6/Extras/lib/python/pkg_resources.py", line 181, in get_build_platform
plat = get_platform()
File "/System/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/distutils/util.py", line 97, in get_platform cfgvars = get_config_vars() File "/System/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/distutils/sysconfig.py", line 525, in get_config_vars func() File "/System/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/distutils/sysconfig.py", line 408, in _init_posix raise DistutilsPlatformError(my_msg)
distutils.errors.DistutilsPlatformError: $MACOSX_DEPLOYMENT_TARGET mismatch: now "10.5" but "10.6" during configure
Solution:
export MACOSX_DEPLOYMENT_TARGET=
Exception: Qt4 command 'moc' not found. Tried: /Library/Frameworks/bin/moc-qt4 and /Library/Frameworks/bin/moc:
Solution:
export QTDIR=$MIXXX_PREFIX/Qt-4.7.4/
This is the Mixxx Wiki - 
Mixxx is a free and open-source DJ software.
Manual
Hardware Compatibility
Reporting Bugs
Getting Involved
Contribution Guidelines
Coding Guidelines
Using Git
Developer Guide
Creating Skins
Contributing Mappings
Mixxx Controls
MIDI Scripting
Components JS
HID Scripting