mir-one · pull · Feb 3, 2025 · Jan 6, 2025 · Nov 15, 2024 · Feb 3, 2025
diff --git a/DEVELOPERS b/DEVELOPERS
@@ -1194,6 +1194,10 @@ N:	Frank Vanbever <frank.vanbever@mind.be>
 F:	package/libmodsecurity/
 F:	package/nginx-modsecurity/
 
+N:	Gaël PORTAY <gael.portay+rtone@gmail.com>
+F:	board/raspberrypi/
+F:	configs/raspberrypi*
+
 N:	Gao Xiang <hsiangkao@aol.com>
 F:	package/erofs-utils/
 
@@ -1915,6 +1919,7 @@ F:	support/testing/tests/package/test_links.py
 F:	support/testing/tests/package/test_links/
 F:	support/testing/tests/package/test_lrzip.py
 F:	support/testing/tests/package/test_lrzsz.py
+F:	support/testing/tests/package/test_ltp_testsuite.py
 F:	support/testing/tests/package/test_ltrace.py
 F:	support/testing/tests/package/test_lvm2.py
 F:	support/testing/tests/package/test_lzip.py

diff --git a/board/raspberrypi/config_0w.txt b/board/raspberrypi/config_0w.txt
@@ -24,6 +24,3 @@ gpu_mem_1024=100
 
 # Enable UART0 for serial console on ttyAMA0
 dtoverlay=miniuart-bt
-
-# enable autoprobing of Bluetooth driver without need of hciattach/btattach
-dtparam=krnbt=on
diff --git a/board/raspberrypi/config_3.txt b/board/raspberrypi/config_3.txt
@@ -24,6 +24,3 @@ gpu_mem_1024=100
 
 # Enable UART0 for serial console on ttyAMA0
 dtoverlay=miniuart-bt
-
-# enable autoprobing of Bluetooth driver without need of hciattach/btattach
-dtparam=krnbt=on
diff --git a/board/raspberrypi/config_3_64bit.txt b/board/raspberrypi/config_3_64bit.txt
@@ -25,8 +25,5 @@ gpu_mem_1024=100
 # Enable UART0 for serial console on ttyAMA0
 dtoverlay=miniuart-bt
 
-# enable autoprobing of Bluetooth driver without need of hciattach/btattach
-dtparam=krnbt=on
-
 # enable 64bits support
 arm_64bit=1
diff --git a/board/raspberrypi/config_4.txt b/board/raspberrypi/config_4.txt
@@ -24,6 +24,3 @@ gpu_mem_1024=100
 
 # Enable UART0 for serial console on ttyAMA0
 dtoverlay=miniuart-bt
-
-# enable autoprobing of Bluetooth driver without need of hciattach/btattach
-dtparam=krnbt=on
diff --git a/board/raspberrypi/config_4_64bit.txt b/board/raspberrypi/config_4_64bit.txt
@@ -25,8 +25,5 @@ gpu_mem_1024=100
 # Enable UART0 for serial console on ttyAMA0
 dtoverlay=miniuart-bt
 
-# enable autoprobing of Bluetooth driver without need of hciattach/btattach
-dtparam=krnbt=on
-
 # enable 64bits support
 arm_64bit=1
diff --git a/board/raspberrypi/config_zero2w.txt b/board/raspberrypi/config_zero2w.txt
@@ -24,6 +24,3 @@ gpu_mem_1024=100
 
 # Enable UART0 for serial console on ttyAMA0
 dtoverlay=miniuart-bt
-
-# enable autoprobing of Bluetooth driver without need of hciattach/btattach
-dtparam=krnbt=on
diff --git a/board/stmicroelectronics/common/stm32mp1xx/patches/linux/linux.hash b/board/stmicroelectronics/common/stm32mp1xx/patches/linux/linux.hash
@@ -1,2 +1,2 @@
 # Locally calculated
-sha256  f048267b7b88316c9ca708c68d15a9ae802dcfc943c3188c1273eb958c433281  linux-6.9.8.tar.xz
+sha256  c954f60197008f1e1f32a1e77293903cf3801d2543ec4bf521f5651eb7f133ce  linux-6.11.6.tar.xz
diff --git a/board/stmicroelectronics/common/stm32mp1xx/patches/optee-os/optee-os.hash b/board/stmicroelectronics/common/stm32mp1xx/patches/optee-os/optee-os.hash
@@ -0,0 +1,2 @@
+# Locally calculated
+sha256  03b91fd7dfdf890e3966f931f07634a2b6a2911bbee2a02ecc48d4a40cf6a9b8  optee-os-4.3.0-git4.tar.gz
diff --git a/board/stmicroelectronics/stm32mp135f-dk/linux.config b/board/stmicroelectronics/stm32mp135f-dk/linux.config
@@ -0,0 +1,190 @@
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_USELIB=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_ARCH_STM32=y
+CONFIG_ARM_THUMBEE=y
+# CONFIG_CACHE_L2X0 is not set
+CONFIG_ARM_ERRATA_430973=y
+CONFIG_ARM_ERRATA_720789=y
+CONFIG_ARM_ERRATA_754322=y
+CONFIG_ARM_ERRATA_754327=y
+CONFIG_ARM_ERRATA_764369=y
+CONFIG_ARM_ERRATA_775420=y
+CONFIG_ARM_ERRATA_798181=y
+CONFIG_SMP=y
+CONFIG_MCPM=y
+CONFIG_HIGHMEM=y
+CONFIG_FORCE_MAX_ZONEORDER=12
+CONFIG_SECCOMP=y
+# CONFIG_ATAGS is not set
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_KERNEL_MODE_NEON=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_CMDLINE_PARTITION=y
+CONFIG_CMA=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_CAN=y
+CONFIG_CAN_M_CAN=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_DMA_CMA=y
+CONFIG_CMA_SIZE_MBYTES=128
+CONFIG_SIMPLE_PM_BUS=y
+CONFIG_ARM_SCMI_PROTOCOL=y
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_STM32_FMC2=y
+CONFIG_MTD_SPI_NOR=y
+# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_SRAM=y
+CONFIG_EEPROM_AT24=y
+CONFIG_NETDEVICES=y
+CONFIG_VIRTIO_NET=y
+CONFIG_KS8851=y
+CONFIG_SMSC911X=y
+CONFIG_STMMAC_ETH=y
+CONFIG_DWMAC_DWC_QOS_ETH=y
+CONFIG_MDIO_BITBANG=y
+CONFIG_INPUT_JOYDEV=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_EDT_FT5X06=y
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_STPMIC1_ONKEY=y
+CONFIG_SERIAL_STM32=y
+CONFIG_SERIAL_STM32_CONSOLE=y
+CONFIG_SERIAL_DEV_BUS=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_STM32F7=y
+CONFIG_SPI=y
+CONFIG_SPI_STM32=y
+CONFIG_SPI_STM32_QSPI=y
+CONFIG_PINCTRL_MCP23S08=y
+CONFIG_PINCTRL_SINGLE=y
+CONFIG_PINCTRL_STMFX=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_GPIO=y
+CONFIG_POWER_RESET_GPIO_RESTART=y
+CONFIG_POWER_RESET_SYSCON=y
+CONFIG_POWER_RESET_SYSCON_POWEROFF=y
+CONFIG_SYSCON_REBOOT_MODE=y
+CONFIG_WATCHDOG=y
+CONFIG_STPMIC1_WATCHDOG=y
+CONFIG_MFD_STM32_LPTIMER=y
+CONFIG_MFD_STPMIC1=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_ARM_SCMI=y
+CONFIG_REGULATOR_STM32_BOOSTER=y
+CONFIG_REGULATOR_STM32_VREFBUF=y
+CONFIG_REGULATOR_STM32_PWR=y
+CONFIG_REGULATOR_STPMIC1=y
+CONFIG_DRM=y
+CONFIG_DRM_STM=y
+CONFIG_DRM_STM_DSI=y
+CONFIG_DRM_PANEL_ORISETECH_OTM8009A=y
+CONFIG_DRM_SII902X=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_DYNAMIC_MINORS=y
+CONFIG_USB=m
+CONFIG_USB_OTG=y
+CONFIG_USB_XHCI_HCD=m
+CONFIG_USB_XHCI_PLATFORM=m
+CONFIG_USB_EHCI_HCD=m
+CONFIG_USB_EHCI_HCD_PLATFORM=m
+CONFIG_USB_OHCI_HCD=m
+CONFIG_USB_OHCI_HCD_PLATFORM=m
+CONFIG_USB_DWC2=m
+CONFIG_USB_CHIPIDEA=m
+CONFIG_USB_CHIPIDEA_HOST=y
+CONFIG_USB_ISP1760=m
+CONFIG_USB_HSIC_USB3503=m
+CONFIG_USB_GPIO_VBUS=y
+CONFIG_USB_ISP1301=m
+CONFIG_USB_ULPI=y
+CONFIG_TYPEC=y
+CONFIG_TYPEC_STUSB=y
+CONFIG_MMC=y
+CONFIG_MMC_BLOCK_MINORS=16
+CONFIG_MMC_ARMMMCI=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_DW=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_PWM=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_STM32=y
+CONFIG_DMADEVICES=y
+CONFIG_STM32_DMA=y
+CONFIG_STM32_DMAMUX=y
+CONFIG_STM32_MDMA=y
+CONFIG_COMMON_CLK_SCMI=y
+CONFIG_HWSPINLOCK=y
+CONFIG_HWSPINLOCK_STM32=y
+CONFIG_STM32_IPCC=y
+CONFIG_REMOTEPROC=y
+CONFIG_STM32_RPROC=y
+CONFIG_RPMSG_VIRTIO=y
+CONFIG_RPMSG_TTY=y
+CONFIG_IIO=y
+CONFIG_IIO_SW_TRIGGER=y
+CONFIG_SD_ADC_MODULATOR=y
+CONFIG_STM32_ADC_CORE=y
+CONFIG_STM32_ADC=y
+CONFIG_STM32_ADC_TEMP=y
+CONFIG_STM32_DFSDM_ADC=y
+CONFIG_STM32_LPTIMER_CNT=y
+CONFIG_STM32_DAC=y
+CONFIG_IIO_HRTIMER_TRIGGER=y
+CONFIG_IIO_STM32_LPTIMER_TRIGGER=y
+CONFIG_PWM=y
+CONFIG_PWM_STM32=y
+CONFIG_PWM_STM32_LP=y
+CONFIG_RESET_SCMI=y
+CONFIG_PHY_STM32_USBPHYC=y
+CONFIG_NVMEM_STM32_ROMEM=y
+CONFIG_TEE=y
+CONFIG_OPTEE=y
+CONFIG_COUNTER=y
+CONFIG_STM32_LPTIMER_CNT=y
+CONFIG_STM32_TIMER_CNT=y
+CONFIG_EXT4_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_PRINTK_TIME=y
diff --git a/board/stmicroelectronics/stm32mp135f-dk/overlay/boot/extlinux/extlinux.conf b/board/stmicroelectronics/stm32mp135f-dk/overlay/boot/extlinux/extlinux.conf
@@ -0,0 +1,4 @@
+label stm32mp135f-dk-buildroot
+  kernel /boot/zImage
+  devicetree /boot/stm32mp135f-dk.dtb
+  append root=/dev/mmcblk0p4 rootwait
diff --git a/board/stmicroelectronics/stm32mp135f-dk/readme.txt b/board/stmicroelectronics/stm32mp135f-dk/readme.txt
@@ -0,0 +1,38 @@
+STM32MP135F Discovery Kit
+
+Intro
+=====
+
+This configuration supports the STM32MP135F Discovery Kit (DK)
+platform:
+
+  https://www.st.com/en/evaluation-tools/stm32mp135f-dk.html
+
+How to build
+============
+
+ $ make stm32mp135f_dk_defconfig
+ $ make
+
+How to write the microSD card
+=============================
+
+Once the build process is finished you will have an image called
+"sdcard.img" in the output/images/ directory.
+
+Copy the bootable "sdcard.img" onto an microSD card with "dd":
+
+  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
+
+Boot the board
+==============
+
+ (1) Insert the microSD card in connector CN15
+
+ (2) Plug a micro-USB cable in connector CN11 and run your serial
+     communication program on /dev/ttyACM0.
+
+ (3) Plug a USB-C cable in CN6 to power-up the board.
+
+ (4) The system will start, with the console on UART, but also visible
+     on the screen.
diff --git a/board/xilinx/patches/xilinx-prebuilt/xilinx-prebuilt.hash b/board/xilinx/patches/xilinx-prebuilt/xilinx-prebuilt.hash
diff --git a/boot/xilinx-prebuilt/Config.in b/boot/xilinx-prebuilt/Config.in
@@ -18,7 +18,7 @@ if BR2_TARGET_XILINX_PREBUILT
 
 config BR2_TARGET_XILINX_PREBUILT_VERSION
 	string "prebuilt version"
-	default "xilinx_v2024.1"
+	default "xilinx_v2024.2_update1"
 	help
 	  Release version of Xilinx firmware.
 	  Must be xilinx_v2023.1 or newer.

diff --git a/boot/xilinx-prebuilt/xilinx-prebuilt.hash b/boot/xilinx-prebuilt/xilinx-prebuilt.hash
@@ -1,5 +1,5 @@
 # Locally calculated
-sha256  7abcba4e0e44e3a4adf9c1f971d918575226d7604dfd64a386baaa00c1c6c35f  xilinx-prebuilt-xilinx_v2024.1.tar.gz
+sha256  86ee9629366aa8c0d70b87202152a793804ed4090e3a6fdac4eaf855bcc4d458  xilinx-prebuilt-xilinx_v2024.2_update1.tar.gz
 
 # Locally calculated
 sha256  7b2074b607264a07347e1a7ef0323229585942793469f34b2cf9628f7623e05f  LICENSE
diff --git a/configs/nvidia_bf3_defconfig b/configs/nvidia_bf3_defconfig
@@ -1,4 +1,5 @@
 BR2_aarch64=y
+BR2_cortex_a78=y
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_11=y
 BR2_GLOBAL_PATCH_DIR="board/nvidia/bf3/patches"
 BR2_DOWNLOAD_FORCE_CHECK_HASHES=y

diff --git a/configs/stm32mp135f_dk_defconfig b/configs/stm32mp135f_dk_defconfig
@@ -0,0 +1,50 @@
+BR2_arm=y
+BR2_cortex_a7=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_11=y
+BR2_GLOBAL_PATCH_DIR="board/stmicroelectronics/common/stm32mp1xx/patches"
+BR2_DOWNLOAD_FORCE_CHECK_HASHES=y
+BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y
+BR2_ROOTFS_OVERLAY="board/stmicroelectronics/stm32mp135f-dk/overlay"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/stmicroelectronics/common/stm32mp1xx/post-image.sh"
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.11.6"
+BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/stmicroelectronics/stm32mp135f-dk/linux.config"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="st/stm32mp135f-dk"
+BR2_LINUX_KERNEL_INSTALL_TARGET=y
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
+BR2_PACKAGE_OPTEE_CLIENT=y
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
+# BR2_TARGET_ROOTFS_TAR is not set
+BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_LATEST_LTS_2_10_VERSION=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="stm32mp1"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_FIP=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL32_OPTEE=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_BL33_IMAGE="u-boot-nodtb.bin"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="STM32MP_SDMMC=1 DTB_FILE_NAME=stm32mp135f-dk.dtb BL33_CFG=$(BINARIES_DIR)/u-boot.dtb"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES="fip.bin *.stm32"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_DTC=y
+BR2_TARGET_OPTEE_OS=y
+BR2_TARGET_OPTEE_OS_CUSTOM_VERSION=y
+BR2_TARGET_OPTEE_OS_CUSTOM_VERSION_VALUE="4.3.0"
+BR2_TARGET_OPTEE_OS_NEEDS_PYTHON_CRYPTOGRAPHY=y
+BR2_TARGET_OPTEE_OS_PLATFORM="stm32mp1"
+BR2_TARGET_OPTEE_OS_PLATFORM_FLAVOR="135F_DK"
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2024.07"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="stm32mp13"
+BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
+# BR2_TARGET_UBOOT_FORMAT_BIN is not set
+BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-nodtb.bin u-boot.dtb"
+BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="DEVICE_TREE=stm32mp135f-dk"
+BR2_PACKAGE_HOST_GENIMAGE=y
diff --git a/configs/versal_vck190_defconfig b/configs/versal_vck190_defconfig
@@ -40,7 +40,6 @@ BR2_TARGET_XILINX_EMBEDDEDSW=y
 BR2_TARGET_XILINX_EMBEDDEDSW_VERSAL_PLM=y
 BR2_TARGET_XILINX_EMBEDDEDSW_VERSAL_PSMFW=y
 BR2_TARGET_XILINX_PREBUILT=y
-BR2_TARGET_XILINX_PREBUILT_VERSION="xilinx_v2024.2"
 BR2_TARGET_XILINX_PREBUILT_VERSAL=y
 BR2_PACKAGE_HOST_BOOTGEN=y
 BR2_PACKAGE_HOST_DOSFSTOOLS=y

diff --git a/configs/versal_vek280_defconfig b/configs/versal_vek280_defconfig
@@ -40,7 +40,6 @@ BR2_TARGET_XILINX_EMBEDDEDSW=y
 BR2_TARGET_XILINX_EMBEDDEDSW_VERSAL_PLM=y
 BR2_TARGET_XILINX_EMBEDDEDSW_VERSAL_PSMFW=y
 BR2_TARGET_XILINX_PREBUILT=y
-BR2_TARGET_XILINX_PREBUILT_VERSION="xilinx_v2024.2"
 BR2_TARGET_XILINX_PREBUILT_VERSAL=y
 BR2_TARGET_XILINX_PREBUILT_BOARD="vek280"
 BR2_PACKAGE_HOST_BOOTGEN=y
Original file line number	Diff line number	Diff line change
		@@ -0,0 +1,2 @@
		# Locally calculated
		sha256 03b91fd7dfdf890e3966f931f07634a2b6a2911bbee2a02ecc48d4a40cf6a9b8 optee-os-4.3.0-git4.tar.gz