Merge tag 'v4.9.64' into linux-4.9.x-unofficial_grsec

This is the 4.9.64 stable release

Documentation/devicetree/bindings/arm/davinci.txt

@@ -13,10 +13,6 @@ EnBW AM1808 based CMC board
 Required root node properties:
     - compatible = "enbw,cmc", "ti,da850;
 
-LEGO MINDSTORMS EV3 (AM1808 based)
-Required root node properties:
-    - compatible = "lego,ev3", "ti,da850";
-
 Generic DaVinci Boards
 ----------------------
 

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -154,7 +154,6 @@ kosagi	Sutajio Ko-Usagi PTE Ltd.
 kyo	Kyocera Corporation
 lacie	LaCie
 lantiq	Lantiq Semiconductor
-lego	LEGO Systems A/S
 lenovo	Lenovo Group Ltd.
 lg	LG Corporation
 linux	Linux-specific binding

Makefile

@@ -1,6 +1,6 @@
 VERSION = 4
 PATCHLEVEL = 9
-SUBLEVEL = 63
+SUBLEVEL = 64
 EXTRAVERSION =
 NAME = Roaring Lionus
 

arch/arm/boot/dts/am33xx.dtsi

@@ -143,10 +143,11 @@
 				};
 
 				scm_conf: scm_conf@0 {
-					compatible = "syscon";
+					compatible = "syscon", "simple-bus";
 					reg = <0x0 0x800>;
 					#address-cells = <1>;
 					#size-cells = <1>;
+					ranges = <0 0 0x800>;
 
 					scm_clocks: clocks {
 						#address-cells = <1>;

arch/arm/boot/dts/dm814x.dtsi

@@ -252,7 +252,7 @@
 			};
 
 			uart1: uart@20000 {
-				compatible = "ti,omap3-uart";
+				compatible = "ti,am3352-uart", "ti,omap3-uart";
 				ti,hwmods = "uart1";
 				reg = <0x20000 0x2000>;
 				clock-frequency = <48000000>;
@@ -262,7 +262,7 @@
 			};
 
 			uart2: uart@22000 {
-				compatible = "ti,omap3-uart";
+				compatible = "ti,am3352-uart", "ti,omap3-uart";
 				ti,hwmods = "uart2";
 				reg = <0x22000 0x2000>;
 				clock-frequency = <48000000>;
@@ -272,7 +272,7 @@
 			};
 
 			uart3: uart@24000 {
-				compatible = "ti,omap3-uart";
+				compatible = "ti,am3352-uart", "ti,omap3-uart";
 				ti,hwmods = "uart3";
 				reg = <0x24000 0x2000>;
 				clock-frequency = <48000000>;
@@ -332,10 +332,11 @@
 				ranges = <0 0x140000 0x20000>;
 
 				scm_conf: scm_conf@0 {
-					compatible = "syscon";
+					compatible = "syscon", "simple-bus";
 					reg = <0x0 0x800>;
 					#address-cells = <1>;
 					#size-cells = <1>;
+					ranges = <0 0 0x800>;
 
 					scm_clocks: clocks {
 						#address-cells = <1>;

arch/arm/boot/dts/dm816x.dtsi

@@ -371,7 +371,7 @@
 		};
 
 		uart1: uart@48020000 {
-			compatible = "ti,omap3-uart";
+			compatible = "ti,am3352-uart", "ti,omap3-uart";
 			ti,hwmods = "uart1";
 			reg = <0x48020000 0x2000>;
 			clock-frequency = <48000000>;
@@ -381,7 +381,7 @@
 		};
 
 		uart2: uart@48022000 {
-			compatible = "ti,omap3-uart";
+			compatible = "ti,am3352-uart", "ti,omap3-uart";
 			ti,hwmods = "uart2";
 			reg = <0x48022000 0x2000>;
 			clock-frequency = <48000000>;
@@ -391,7 +391,7 @@
 		};
 
 		uart3: uart@48024000 {
-			compatible = "ti,omap3-uart";
+			compatible = "ti,am3352-uart", "ti,omap3-uart";
 			ti,hwmods = "uart3";
 			reg = <0x48024000 0x2000>;
 			clock-frequency = <48000000>;

arch/arm/boot/dts/omap5-uevm.dts

@@ -18,6 +18,10 @@
 		reg = <0 0x80000000 0 0x7f000000>; /* 2032 MB */
 	};
 
+	aliases {
+		ethernet = &ethernet;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		led1 {
@@ -72,6 +76,23 @@
 	>;
 };
 
+&usbhsehci {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	hub@2 {
+		compatible = "usb424,3503";
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	ethernet: usbether@3 {
+		compatible = "usb424,9730";
+		reg = <3>;
+	};
+};
+
 &wlcore {
 	compatible = "ti,wl1837";
 };

arch/arm/crypto/aesbs-glue.c

@@ -363,7 +363,7 @@ static struct crypto_alg aesbs_algs[] = { {
 }, {
 	.cra_name		= "cbc(aes)",
 	.cra_driver_name	= "cbc-aes-neonbs",
-	.cra_priority		= 300,
+	.cra_priority		= 250,
 	.cra_flags		= CRYPTO_ALG_TYPE_ABLKCIPHER|CRYPTO_ALG_ASYNC,
 	.cra_blocksize		= AES_BLOCK_SIZE,
 	.cra_ctxsize		= sizeof(struct async_helper_ctx),
@@ -383,7 +383,7 @@ static struct crypto_alg aesbs_algs[] = { {
 }, {
 	.cra_name		= "ctr(aes)",
 	.cra_driver_name	= "ctr-aes-neonbs",
-	.cra_priority		= 300,
+	.cra_priority		= 250,
 	.cra_flags		= CRYPTO_ALG_TYPE_ABLKCIPHER|CRYPTO_ALG_ASYNC,
 	.cra_blocksize		= 1,
 	.cra_ctxsize		= sizeof(struct async_helper_ctx),
@@ -403,7 +403,7 @@ static struct crypto_alg aesbs_algs[] = { {
 }, {
 	.cra_name		= "xts(aes)",
 	.cra_driver_name	= "xts-aes-neonbs",
-	.cra_priority		= 300,
+	.cra_priority		= 250,
 	.cra_flags		= CRYPTO_ALG_TYPE_ABLKCIPHER|CRYPTO_ALG_ASYNC,
 	.cra_blocksize		= AES_BLOCK_SIZE,
 	.cra_ctxsize		= sizeof(struct async_helper_ctx),

arch/arm/mach-omap2/pdata-quirks.c

@@ -600,7 +600,6 @@ static void pdata_quirks_check(struct pdata_init *quirks)
 		if (of_machine_is_compatible(quirks->compatible)) {
 			if (quirks->fn)
 				quirks->fn();
-			break;
 		}
 		quirks++;
 	}

arch/arm64/boot/dts/broadcom/ns2.dtsi

@@ -30,6 +30,8 @@
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
+/memreserve/ 0x81000000 0x00200000;
+
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/bcm-ns2.h>
 

arch/mips/include/asm/asm.h

@@ -54,7 +54,8 @@
 		.align	2;				\
 		.type	symbol, @function;		\
 		.ent	symbol, 0;			\
-symbol:		.frame	sp, 0, ra
+symbol:		.frame	sp, 0, ra;			\
+		.insn
 
 /*
  * NESTED - declare nested routine entry point
@@ -63,8 +64,9 @@ symbol:		.frame	sp, 0, ra
 		.globl	symbol;				\
 		.align	2;				\
 		.type	symbol, @function;		\
-		.ent	symbol, 0;			 \
-symbol:		.frame	sp, framesize, rpc
+		.ent	symbol, 0;			\
+symbol:		.frame	sp, framesize, rpc;		\
+		.insn
 
 /*
  * END - mark end of function
@@ -86,7 +88,7 @@ symbol:		.frame	sp, framesize, rpc
 #define FEXPORT(symbol)					\
 		.globl	symbol;				\
 		.type	symbol, @function;		\
-symbol:
+symbol:		.insn
 
 /*
  * ABS - export absolute symbol

arch/mips/include/asm/mips-cm.h

@@ -187,6 +187,7 @@ BUILD_CM_R_(config,		MIPS_CM_GCB_OFS + 0x00)
 BUILD_CM_RW(base,		MIPS_CM_GCB_OFS + 0x08)
 BUILD_CM_RW(access,		MIPS_CM_GCB_OFS + 0x20)
 BUILD_CM_R_(rev,		MIPS_CM_GCB_OFS + 0x30)
+BUILD_CM_RW(err_control,	MIPS_CM_GCB_OFS + 0x38)
 BUILD_CM_RW(error_mask,		MIPS_CM_GCB_OFS + 0x40)
 BUILD_CM_RW(error_cause,	MIPS_CM_GCB_OFS + 0x48)
 BUILD_CM_RW(error_addr,		MIPS_CM_GCB_OFS + 0x50)
@@ -266,6 +267,12 @@ BUILD_CM_Cx_R_(tcid_8_priority,	0x80)
 #define CM_REV_CM2_5				CM_ENCODE_REV(7, 0)
 #define CM_REV_CM3				CM_ENCODE_REV(8, 0)
 
+/* GCR_ERR_CONTROL register fields */
+#define CM_GCR_ERR_CONTROL_L2_ECC_EN_SHF	1
+#define CM_GCR_ERR_CONTROL_L2_ECC_EN_MSK	(_ULCAST_(0x1) << 1)
+#define CM_GCR_ERR_CONTROL_L2_ECC_SUPPORT_SHF	0
+#define CM_GCR_ERR_CONTROL_L2_ECC_SUPPORT_MSK	(_ULCAST_(0x1) << 0)
+
 /* GCR_ERROR_CAUSE register fields */
 #define CM_GCR_ERROR_CAUSE_ERRTYPE_SHF		27
 #define CM_GCR_ERROR_CAUSE_ERRTYPE_MSK		(_ULCAST_(0x1f) << 27)

arch/mips/kernel/setup.c

@@ -153,6 +153,35 @@ void __init detect_memory_region(phys_addr_t start, phys_addr_t sz_min, phys_add
 	add_memory_region(start, size, BOOT_MEM_RAM);
 }
 
+bool __init memory_region_available(phys_addr_t start, phys_addr_t size)
+{
+	int i;
+	bool in_ram = false, free = true;
+
+	for (i = 0; i < boot_mem_map.nr_map; i++) {
+		phys_addr_t start_, end_;
+
+		start_ = boot_mem_map.map[i].addr;
+		end_ = boot_mem_map.map[i].addr + boot_mem_map.map[i].size;
+
+		switch (boot_mem_map.map[i].type) {
+		case BOOT_MEM_RAM:
+			if (start >= start_ && start + size <= end_)
+				in_ram = true;
+			break;
+		case BOOT_MEM_RESERVED:
+			if ((start >= start_ && start < end_) ||
+			    (start < start_ && start + size >= start_))
+				free = false;
+			break;
+		default:
+			continue;
+		}
+	}
+
+	return in_ram && free;
+}
+
 static void __init print_memory_map(void)
 {
 	int i;
@@ -332,11 +361,19 @@ static void __init bootmem_init(void)
 
 #else  /* !CONFIG_SGI_IP27 */
 
+static unsigned long __init bootmap_bytes(unsigned long pages)
+{
+	unsigned long bytes = DIV_ROUND_UP(pages, 8);
+
+	return ALIGN(bytes, sizeof(long));
+}
+
 static void __init bootmem_init(void)
 {
 	unsigned long reserved_end;
 	unsigned long mapstart = ~0UL;
 	unsigned long bootmap_size;
+	bool bootmap_valid = false;
 	int i;
 
 	/*
@@ -430,11 +467,42 @@ static void __init bootmem_init(void)
 #endif
 
 	/*
-	 * Initialize the boot-time allocator with low memory only.
+	 * check that mapstart doesn't overlap with any of
+	 * memory regions that have been reserved through eg. DTB
 	 */
-	bootmap_size = init_bootmem_node(NODE_DATA(0), mapstart,
-					 min_low_pfn, max_low_pfn);
+	bootmap_size = bootmap_bytes(max_low_pfn - min_low_pfn);
+
+	bootmap_valid = memory_region_available(PFN_PHYS(mapstart),
+						bootmap_size);
+	for (i = 0; i < boot_mem_map.nr_map && !bootmap_valid; i++) {
+		unsigned long mapstart_addr;
+
+		switch (boot_mem_map.map[i].type) {
+		case BOOT_MEM_RESERVED:
+			mapstart_addr = PFN_ALIGN(boot_mem_map.map[i].addr +
+						boot_mem_map.map[i].size);
+			if (PHYS_PFN(mapstart_addr) < mapstart)
+				break;
+
+			bootmap_valid = memory_region_available(mapstart_addr,
+								bootmap_size);
+			if (bootmap_valid)
+				mapstart = PHYS_PFN(mapstart_addr);
+			break;
+		default:
+			break;
+		}
+	}
 
+	if (!bootmap_valid)
+		panic("No memory area to place a bootmap bitmap");
+
+	/*
+	 * Initialize the boot-time allocator with low memory only.
+	 */
+	if (bootmap_size != init_bootmem_node(NODE_DATA(0), mapstart,
+					 min_low_pfn, max_low_pfn))
+		panic("Unexpected memory size required for bootmap");
 
 	for (i = 0; i < boot_mem_map.nr_map; i++) {
 		unsigned long start, end;
@@ -483,6 +551,10 @@ static void __init bootmem_init(void)
 			continue;
 		default:
 			/* Not usable memory */
+			if (start > min_low_pfn && end < max_low_pfn)
+				reserve_bootmem(boot_mem_map.map[i].addr,
+						boot_mem_map.map[i].size,
+						BOOTMEM_DEFAULT);
 			continue;
 		}