Skip to content

mikeizbicki/twitter_coronavirus

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

19 Commits
 
 
 
 
 
 
 
 

Repository files navigation

Coronavirus twitter analysis

You will scan all geotagged tweets sent in 2020 to monitor for the spread of the coronavirus on social media.

Learning Objectives:

  1. work with large scale datasets
  2. work with multilingual text
  3. use the MapReduce divide-and-conquer paradigm to create parallel code

Background

About the Data:

Approximately 500 million tweets are sent everyday. Of those tweets, about 2% are geotagged. That is, the user's device includes location information about where the tweets were sent from. The lambda server's /data/Twitter dataset folder contains all geotagged tweets that were sent in 2020. In total, there are about 1.1 billion tweets in this dataset.

The tweets are stored as follows. The tweets for each day are stored in a zip file geoTwitterYY-MM-DD.zip, and inside this zip file are 24 text files, one for each hour of the day. Each text file contains a single tweet per line in JSON format. JSON is a popular format for storing data that is closely related to python dictionaries.

Vim is able to open compressed zip files, and I encourage you to use vim to explore the dataset. For example, run the command

$ vim /data/Twitter\ dataset/geoTwitter20-01-01.zip

Or you can get a "pretty printed" interface with a command like

$ unzip -p /data/Twitter\ dataset/geoTwitter20-01-01.zip | head -n1 | python3 -m json.tool | vim -

About MapReduce:

You will follow the MapReduce procedure to analyze these tweets. MapReduce is a famous procedure for large scale parallel processing that is widely used in industry. It is a 3 step procedure summarized in the following image:

I have already done the partition step for you (by splitting up the tweets into one file per day). You will have to do the map and reduce steps.

MapReduce Runtime:

Let $n$ be the size of the dataset and $p$ be the number of processors used to do the computation. The simplest and most common scenario is that the map procedure takes time $O(n)$ and the reduce procedure takes time $O(1)$. (These will be the runtimes of our map/reduce procedures.) In this case, the overall runtime is $O(n/p + \log p)$. In the typical case when $p$ is much smaller than $n$, then the runtime simplifies to $O(n/p)$. This means that:

  1. doubling the amount of data will cause the analysis to take twice as long;
  2. doubling the number of processors will cause the analysis to take half as long;
  3. if you want to add more data and keep the processing time the same, then you need to add a proportional number of processors.

More complex runtimes are possible. Merge sort over MapReduce is the classic example. Here, mapping is equivalent to sorting and so takes time $O(n \log n)$, and reducing is a call to the _merge function that takes time $O(n)$. But they are both rare in practice and require careful math to describe, so we will ignore them. In the merge sort example, it requires $p=n$ processors just to reduce the runtime down to $O(n)$... that's a lot of additional computing power for very little gain, and so is impractical.

It is currently not known which algorithms can be parallelized with MapReduce and which algorithms cannot be parallelized this way. Most computer scientists believe there are some algorithms which cannot be parallelized, but we don't yet have a proof that this is the case.

Background Tasks

Complete the following tasks to familiarize yourself with the sample code:

Task 0: Setup

Fork this repo and clone it onto the lambda server.

Task 1: Map

The map.py file processes the zip file for an individual day. From the root directory of your clone, run the command

$ ./src/map.py --input_path=/data/Twitter\ dataset/geoTwitter20-02-16.zip

This command will take a few minutes to run as it is processing all of the tweets within the zip file. After the command finishes, you will now have a folder outputs that contains a file /geoTwitter20-02-16.zip.lang. This is a file that contains JSON formatted information summarizing the tweets from 16 February.

NOTE: In previous labs, we combined the unzip, grep, and jq commands to analyze a single day of tweets. These terminal commands are great for doing simple analysis, but as the analysis becomes more complicated, it becomes easier to switch to python instead of the shell.

Task 1b: Visualize

The visualize.py file displays the output from running the map.py file. Run the command

$ ./src/visualize.py --input_path=outputs/geoTwitter20-02-16.zip.lang --key='#coronavirus'

This displays the total number of times the hashtag #coronavirus was used on 16 February in each of the languages supported by twitter. Now manually inspect the output of the .lang file using vim:

$ vim outputs/geoTwitter20-02-16.zip.lang

You should see that the file contains a dictionary of dictionaries. The outermost dictionary has hashtags as the keys, and the innermost dictionary has languages as the keys. The visualize.py file simply provides a nicer visualization of these dictionaries.

Task 2: Reduce

The reduce.py file merges the outputs generated by the map.py file so that the combined files can be visualized. Generate a new output file for a different day of data by running the command

$ ./src/map.py --input_path=/data/Twitter\ dataset/geoTwitter20-02-17.zip

We now have multiple days worth of data. In order to visualize this data, we need to merge it into a single file. That is the purpose of the reduce.py command. Merge the data files by running:

$ ./src/reduce.py --input_paths outputs/geoTwitter20-02-16.zip.lang outputs/geoTwitter20-02-17.zip.lang --output_path=reduced.lang

Alternatively, you can use the glob to merge all output files with the command

$ ./src/reduce.py --input_paths outputs/geoTwitter*.lang --output_path=reduced.lang

Task 2b: Visualize

The format of the data files that reduce.py outputs is the same format as the data files that map.py outputs. Therefore, we can use the same visualization code on both of them. Now you can visualize the reduced.lang file with the command

$ ./src/visualize.py --input_path=reduced.lang --key='#coronavirus'

and this displays the combined result.

Programming Tasks

Complete the following tasks:

Task 0: Create the mapper

Modify the map.py file so that it tracks the usage of the hashtags on both a language and country level. This will require creating a variable counter_country similar to the variable counter_lang, and modifying this variable in the #search hashtags section of the code appropriately. The output of running map.py should be two files now, one that ends in .lang for the language dictionary (same as before), and one that ends in .country for the country dictionary.

HINT: Most tweets contain a place key, which contains a dictionary with the country_code key. This is how you should lookup the country that a tweet was sent from. Some tweets, however, do not have a country_code key. This can happen, for example, if the tweet was sent from international waters or the international space station. Your code will have to be generic enough to handle edge cases similar to this without failing.

Task 1: Run the mapper

HINT: You should thoroughly test your map.py file on a single day's worth of tweets and verify that you are getting reasonable results before moving on to this step.

Create a shell script called run_maps.sh. This file will loop over each file in the dataset and run the map.py command on that file. Each call to map.py can take up to a day to finish, so you should use the nohup command to ensure the program continues to run after you disconnect and the & operator to ensure that all map.py commands run in parallel.

HINT: Use the glob * to select only the tweets from 2020 and not all tweets.

Task 2: Reduce

HINT: You should manually inspect the output of your mapper code to ensure that it is reasonable and that you did not run into any error messages. If you have errors above that you don't deal with, then everything else below will be incorrect.

After your modified map.py has run on all the files, you should have a large number of files in your outputs folder. Use the reduce.py file to combine all of the .lang files into a single file, and all of the .country files into a different file.

Task 3: Visualize

Recall that you can visualize your output files with the command

$ ./src/visualize.py --input_path=PATH --key=HASHTAG

Currently, this prints the top keys to stdout.

Modify the visualize.py file so that it generates a bar graph of the results and stores the bar graph as a png file. The horizontal axis of the graph should be the keys of the input file, and the vertical axis of the graph should be the values of the input file. The final results should be sorted from low to high, and you only need to include the top 10 keys.

HINT: We are not covering how to create images from python code in this class. I recommend you use the matplotlib library, and you can find some samples to base your code off of in the documentation here.

Then, run the visualize.py file with the --input_path equal to both the country and lang files created in the reduce phase, and the --key set to #coronavirus and #코로나바이러스. This should generate four plots in total.

Task 4: Alternative Reduce

Create a new file alternative_reduce.py. This file should take as input on the command line a list of hashtags, and output a line plot where:

  1. There is one line per input hashtag.
  2. The x-axis is the day of the year.
  3. The y-axis is the number of tweets that use that hashtag during the year.

Your alternative_reduce.py file have to follow a similar structure to a combined version of the reduce.py and visualize.py files. First, you will scan through all of the data in the outputs folder created by the mapping step. In this scan, you will construct a dataset that contains the information that you need to plot. Then, after you have extracted this information, you should call the appropriate matplotlib functions to plot the data.

HINT: The specifications for this program and plot are intentionally underspecified (similar to how many real-world problems are underspecified). Feel free to ask clarifying questions.

Task 5: Uploading

Commit all of your code and images output files to your github repo and push the results to github. You must:

  1. Delete the current contents of the README.md file
  2. Insert into the README.md file a brief explanation of your project, including the 4 generated png files. This explanation should be suitable for a future employer to look at while they are interviewing you to get a rough idea of what you accomplished. (And you should tell them about this in your interviews!)

Submission

Upload a link to you github repository on sakai. I will look at your code and visualization to determine your grade.

Grading:

The assignment is worth 32 points:

  1. 8 points for getting the map/reduce to work
  2. 8 points for your repo/readme file
  3. 8 points for Task 3 plots
  4. 8 points for Task 4 plots

The most common ways to miss points are:

  1. having incorrect data plotted (because the map program didn't finish running on all of the inputs)
  2. having illegible plots that are not "reasonably" formatted

Notice that we are not using CI to grade this assignment. There's two reasons:

  1. You can get slightly different numbers depending on some of the design choices you make in your code. For example, should the term corona count tweets that contain coronavirus as well as tweets that contain just corona? These are relatively insignificant decisions. I'm more concerned with your ability to write a shell script and use nohup, &, and other process control tools effectively.

  2. The dataset is too large to upload to github actions. In general, writing test cases for large data analysis tasks is tricky and rarely done. Writing correct code without test cases is hard, and so many (most?) analysis of large datasets contain lots of bugs.

About

No description, website, or topics provided.

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages