#IoT security example This example shows how to use keycloak to secure devices in the IoT. Application as it stands provides just central hub for services. For the complete overview I suggest to use it with https://github.com/slowercz/rpi_HC-SR501 and https://github.com/slowercz/rpi_DS18B20, in case you don't have needed Raspberry PI and sensors you can run mock sensors, which provides random data.

#Requirements

1. keycloak 1.5.0 Final (though possibly could run on 1.3+)
2. wildfly 9.0.1 Final

#Setup

##Keycloak

1. create realm "IoT" and client "iot" in it. (https://www.youtube.com/watch?v=z-sUzl9eG6M)
2. turn on direct grants only
3. access type: public
4. create roles: "motionSensor" and "temperatureSensor"
5. create users: "motion-sensor" and "temperature-sensor"
6. assign motionSensor role to motion-sensor user and temperatureSensor to temperature-sensor
7. set password for motion-sensor to "motSens" and for temperature-sensor to "tempSens"
8. (optional) configure keycloak to use SSL - in this case all addresses will start with protocol HTTPS, instead of HTTP
9. generate keycloak.json (watch for correct auth-server-url if you will try to access it from other computers and not only from localhost)

##Application

1. import correct keycloak.json (generated in step Keycloak 8)
2. run wildfly
3. run comman mvn clean package wildfly:deploy

##Sensors

1. set correct IP address in restClient.js for both sensors (https://github.com/slowercz/rpi_HC-SR501 and https://github.com/slowercz/rpi_DS18B20)
2. in case keycloak runs on different IP then application alter methods "sendMotion" and "sendTemperature" to match the correct address

#Usage You can view results of your sensors on address http://[server-address:port]/iot-hub-example/

##Manual usage There is nothing preventing you from connecting to hub manually using HTTP calls. Those changes will also appear on the main page, as the page gets informations via same REST endpoints.

###Authentication You can get your token on address http://[keycloak-address:port]/auth/realms/iot/protocol/openid-connect/token as described in keycloak documentation. After that you need to add "Authorization" header to ever request done on secured resources. You need to make separate authentication for each "sensor".

###Movement management

1. List of movements is obtained using GET method on http://[server-address:port]/iot-hub-example/rest/movement/list . This endpoint is public
2. You can add movement using POST method on http://[server-address:port]/iot-hub-example/rest/movement/add/{MovementDescription}

###Temperature management

1. List of temperatures is obtained using GET method on htp://[server-address:port]/iot-hub-example/rest/temperature/list . This endpoint is public
2. You can add movement using POST method on http://[server-address:port]/iot-hub-example/rest/temperature/add/{MovementDescription}