A cross-implementation Sass test suite
sass-spec is the official Sass test suite. It's used by all major Sass
implementations to ensure that they correctly implement the language.
Before running specs, you'll need to install [Node.js] 14.14 or newer. Then, from the root of
this repo, run npm install.
From there, it depends which implementation you're testing:
To run specs against Dart Sass, the reference implementation of Sass that's
used for the sass package on npm, you'll first need to install Dart.
Then run:
# If you already have a clone of the Dart Sass repo, you can use that instead.
git clone https://github.com/sass/dart-sass
(cd dart-sass; pub get)
export DART_SASS_PATH=`pwd`/dart-sass
npm run sass-spec -- --dart $DART_SASS_PATHTo run specs against LibSass, the C++ Sass implementation that's used for Node Sass and other languages' Sass wrappers, you'll need to be able to build LibSass. Once you have all the build dependencies:
# If you already have a clone of the LibSass repo, you can use that instead.
git clone https://github.com/sass/libsass
(cd libsass; ./script/bootstrap; make sassc)
export SASSC_PATH=`pwd`/libsass/sassc/bin/sassc
npm run sass-spec -- --impl libsass -c $SASSC_PATHEach spec is defined by a directory with an input.scss or input.sass file
and either:
- An
output.cssfile, in which case the spec asserts that the Sass implementation compiles the input to the output. These specs are known as "success specs". - An
errorfile, in which case the spec asserts that the Sass implementation prints the error message to standard error and exits with a non-zero status code when it compiles the input. These specs are known as "error specs".
These files may also have variants that are specific to individual implementations.
The path to the spec serves as the spec's name, which should tersely describe what it's testing. Additional explanation, if necessary, is included in a silent comment in the input file. Specs may also contain additional files that are used by the input file, as well as various other features which are detailed below.
Most specs are stored in HRX files, which are human-readable plain-text
archives that define a virtual filesystem. This format makes it easy for code
reviewers to see the context of specs they're reviewing. The spec runner treats
each HRX file as a directory with the same name as the file, minus .hrx. For
example:
<===> input.scss
ul {
margin-left: 1em;
li {
list-style-type: none;
}
}
<===> output.css
ul {
margin-left: 1em;
}
ul li {
list-style-type: none;
}
HRX archives can also contain directories. This allows us to write multiple
specs for the same feature in a single file rather than spreading them out
across hundreds of separate tiny files. By convention, we include an HRX comment
with 80 = characters between each spec to help keep them visually separate.
For example:
<===> unbracketed/input.scss
a {b: is-bracketed(foo bar)}
<===> unbracketed/output.scss
a {b: false}
<===>
================================================================================
<===> bracketed/input.scss
a {b: is-bracketed([foo bar])}
<===> bracketed/output.scss
a {b: true}
Each HRX archive shouldn't be much longer than 500 lines. Once one gets too long, its subdirectories should be split out into separate archives beneath a physical directory. Conversely, if a given directory contains many small HRX archives, they should be merged together into one larger file. This helps ensure that the repo remains easy to navigate.
The only specs that aren't written in HRX format are those that include invalid UTF-8 byte sequences. The HRX format is itself written in UTF-8, so it's unable to represent the files in these specs.
By default, Sass implementations are expected to emit nothing on standard error
when executing a success spec. However, if a warning file is added to the spec
directory, the spec will assert that the Sass implementation prints that warning
message to standard error as well as compiling the output. This is used to test
the behavior of the @debug and @warn rules, as well as various warnings
(particularly deprecation warnings) emitted by the Sass implementation itself.
Warnings can't be specified for error specs, since everything an implementation
emits on standard error is considered part of the error message that's validated
against error.
Sometimes different Sass implementations produce different but equally-valid CSS
outputs or error messages for the same input. To accommodate this,
implementation-specific output, error, and warning files may be created by
adding -dart-sass or -libsass after the file's name (but before its
extension, in the case of output.css).
When a spec is running for an implementation with an implementations-specific expectation, the normal expectation is ignored completely in favor of the implementation-specific one. It's even possible (although rare) for one implementation to expect an input file to produce an error while another expects it to compile successfully.
Metadata for a spec and options for how it's run can be written in an
options.yml file in the spec's directory. This file applies recursively to all
specs within its directory, so it can be used to configure many specs at once.
All options must begin with :.
All options that are supported for new specs are listed below. A few additional legacy options exist that are no longer considered good style and will eventually be removed.
---
:todo:
- sass/libsass#2827This option indicates implementations that should add support for a spec, but
haven't done so yet. When running specs for a given implementation, all specs
marked as :todo for that implementation are skipped by default. This ensures that
the build remains green while clearly marking which specs are expected to pass
eventually.
Implementations can be (and should be) specified as shorthand GitHub issue
references rather than plain names. This makes it easy to track whether the
implementation has fixed the issue, and to see which specs correspond to which
issue. When marking an issue as :todo for an implementation, please either
find an existing issue to reference or file a new one.
If the --run-todo flag is passed to sass-spec.rb, specs marked as :todo
for the current implementation will be run, and their failures will be reported.
If the --probe-todo flag is passed to sass-spec.rb, specs marked as :todo
for the current implementation will be run, but a failure will be reported only
if those specs pass. This is used to determine which specs need to have :todo
removed once a feature has been implemented. This can be used in combination
with --interactive to automatically remove :todos for
these specs.
---
:warning_todo:
- sass/libsass#2834This option works like :todo, except instead of skipping the entire
test for listed implementations it only skips validating that spec's
warnings. The rest of the spec is run and verified as
normal. This should not be used for error specs.
---
:ignore_for:
- libsassThis option indicates implementations that are never expected to be compatible with a given spec. It's used for specs for old features that some but not all implementations have dropped support for.
The specs in this repo accumulated haphazardly over the years from contributions from many different people, so there's not currently much by way of unified style or organization. However, all new specs should follow the style guide, and old specs should be migrated to be style-guide compliant whenever possible.
If you pass --interactive to npm run sass-spec, it will run in interactive
mode. In this mode, whenever a spec would fail, the spec runner stops and
provides the user with a prompt that allows them to inspect the failure and
determine how to handle it. This makes it easy to add implementation-specific
expectations or mark specs as :todo. For example:
In test case: spec/core_functions/color/hsla/four_args/alpha_percent
Output does not match expectation.
i. Show me the input.
d. show diff.
O. Update expected output and pass test.
I. Migrate copy of test to pass on libsass.
T. Mark spec as todo for libsass.
G. Ignore test for libsass FOREVER.
f. Mark as failed.
X. Exit testing.
Any option can also be applied to all future occurences of that type of failure
by adding ! after it. For example, if you want to mark all failing specs as
:todo for the current implementation you'd type I!.
The unit tests for the spec runner are located in the test/ directory. To run
these unit tests, run:
npm run test