Skip to content
/ katbeam Public
forked from ska-sa/katbeam

Primary beam model library for the MeerKAT project

License

Notifications You must be signed in to change notification settings

mauch/katbeam

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

28 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

katbeam

Primary beam model library for the MeerKAT project, providing functionality to compute simplified beam patterns of MeerKAT antennas.

JimBeam class

MeerKAT simplified primary beam models for L and UHF bands

A cosine aperture taper (Essential Radio Astronomy, Condon & Ransom, 2016, page 83, link) is used as a simplified model of the co-polarisation primary beams. While the sidelobe level accuracy may be coincidental, the model attains a good fit to measurements for the mainlobe region. The model is parameterised by measured frequency dependent pointing, and frequency dependent full width half maximum beam widths (FWHM). The MeerKAT beams are measured using holography techniques, and an averaged result at 60 degrees elevation is used here to determine the frequency dependent parameter values. The pointing errors are determined in the aperture plane using standard phase fitting techniques, while the FWHM values are measured in the beam plane along axis-aligned cuts through the beam centers.

Notes:

  1. This model is a simplification.
  2. The actual beam varies per antenna, and depends on environmental factors.
  3. Since per-antenna pointing errors during an observation often exceed 1 arc minute, the nett 'imaging primary beam' will be slightly broader, and could be approximated by averaging several individual antenna beams with respective antenna pointing errors inserted.
  4. Depending on the usecase it may be necessary to do reference pointing (or use another technique) to remove the antenna pointing errors during the observation in order to use a beam model successfully.

Request:

As a user, please email the author (mattieu@ska.ac.za) with details about your usecase requirements. This may influence future releases. A general description, what extent of the beams are needed, pixelation, frequency resolution, and accuracy requirements are of interest.

Example usage:

import matplotlib.pylab as plt
from katbeam import JimBeam

def showbeam(beam,freqMHz=1000,pol='H',beamextent=10.):
    margin=np.linspace(-beamextent/2.,beamextent/2.,128)
    x,y=np.meshgrid(margin,margin)
    if pol=='H':
        beampixels=beam.HH(x,y,freqMHz)
    elif pol=='V':
        beampixels=beam.VV(x,y,freqMHz)
    else:
        beampixels=beam.I(x,y,freqMHz)
        pol='I'
    plt.clf()
    plt.imshow(beampixels,extent=[-beamextent/2,beamextent/2,-beamextent/2,beamextent/2])
    plt.title('%s pol beam\nfor %s at %dMHz'%(pol,beam.name,freqMHz))
    plt.xlabel('deg')
    plt.ylabel('deg')

uhfbeam=JimBeam('MKAT-AA-UHF-JIM-2020')
showbeam(uhfbeam,800,'H',10)

About

Primary beam model library for the MeerKAT project

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages

  • Python 100.0%