Skip to content
This repository has been archived by the owner on Mar 22, 2021. It is now read-only.

check_lm_sensors is a Nagios plugin to monitor the values of on board sensors and hard disk temperatures on Linux systems

License

Notifications You must be signed in to change notification settings

matteocorti/check_lm_sensors

Repository files navigation

check_lm_sensors is a Nagios plugin to monitor the values of on board sensors and hard
disk temperatures on Linux systems

usage:

  -?, --help      help

  -l, --low       specifies a check for a sensor value which is too low.
                  Example:
                    --low fan1=2000,1000
                  will give a warning if the value of the fan1 sensor drops
                  below 2000 RPMs and a critical status if it drops below
                  1000 RPMs

  -h, --high      specifies a check for a sensor value which is too high.
                  Example:
                    --high temp1=50,60
                  will give a warning if the value of the temp1 sensor reaches
                  50 degrees and a critical status if it reaches 60 degrees

  -r, --range     specifies a check for a sensor value which should stay
                  in a given range.
                  Example:
                    --range v1=1,2,12
                  will give a warning if the value of the sensor gets outside
                  the 11-13 range (12+-1) and a critical status if the value is
                  outside the 10-14 range (12+-2)

  --rename        renames a sensor in the performance output (useful if you
                  want to have common names for similar sensors across different
                  machines)
                  Example:
                    --rename cputemp=temp1

  --sanitize      sanitize sensor names (e.g., removing spaces)

  --list          list all available sensors

  --nosensors     disable checks on check lm_sensors

  --nodrives      disable checks on drive temperatures

  -d, --drives    enable checks on drive temperature

  --hddtemp_bin   manually specifies the location of the hddtemp binary

  --sensors_bin   manually specified the location of the sensors binary

  -v, --verbose   verbose output

  --version       prints $prog_name's version and exits

Deprecated options:

  -c, --check     specifies a check on a sensor. This options accepts two or
                  three numerical values:
                  * with two arguments works similarly to the --high option
                  * with three arguments works similarly to the --range option

Sensors with a space in the name can be specified
* by escaping the space:                        --high sda\ Temp=50,60
* by quoting the name:                          --high 'sda Temp'=50,60
* by substituting the space with an underscore: --high sda_Temp=50,60
* by using the --sanitize option to remove the space
    --sanitize --high sdaTemp=50,60
    
Example:

$ ./check_lm_sensors -v --high 'sda Temp'=30,5,10 --range '+2.5V'=0.2,0.3,2.5
found sensor +3.3V (3.39)
found sensor +2.5V (2.39)
found sensor VCore (1.19)
found sensor +5V (4.61)
found sensor +12V (11.96)
found sensor +3.3V (3.23)
found sensor Case Fan (0)
found sensor CPU Fan (0)
found sensor CPU Temp (62.1)
found sensor Int Temp (66.0)
found sensor vid (1.250)
found temperature for drive sda (51)
LM_SENSORS CRITICAL  sda Temp=51|'Case Fan'=0;;;; 'vid'=1.250;;;; '+5V'=4.61;;;; '+2.5V'=2.39;;;; 'Int Temp'=66.0;;;; '+12V'=11.96;;;; '+3.3V'=3.23;;;; 'VCore'=1.19;;;; 'CPU Temp'=62.1;;;; 'CPU Fan'=0;;;; 'sda Temp'=51;;;;

About

check_lm_sensors is a Nagios plugin to monitor the values of on board sensors and hard disk temperatures on Linux systems

Topics

Resources

License

Stars

Watchers

Forks

Sponsor this project

Packages

No packages published

Languages