[pull] master from torvalds:master #78
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
![pull[bot]](https://avatars.githubusercontent.com/in/12910?s=60&v=4){kind=small}
For tunnel we determine the output devs for IPv4/6 cases, in two separate functions, with a duplicated code. Move that code from IPv4/6 functions to a helper function, with no functional change. Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
…on underlay Currently we don't support nor fail attempts to offload encap flows routed to vlan device on the underlay network. We wrongly consider a vlan underlay device to be on the same e-switch b/c the switchdev ID is retrieved recursively. Add explicit check for that and fail such attempts. Also align to a more strict check for the ingress and the underlay devices to practically be on the same eswitch. Fixes: ce99f6b ('net/mlx5e: Support SRIOV TC encapsulation offloads for IPv6 tunnels') Fixes: 3e621b1 ('net/mlx5e: Support TC encapsulation offloads with upper devices') Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
In tunnel encap we prepare the encap header for IPv4/6 cases, in two separate functions. For ETH header generation the code is almost duplicated. Move the ETH header generation code from IPv4/6 functions to a helper function, with no functional change. Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Change the order to first route IPv4/6 and return if error. Only after successful route continue to allocate an encap header, with no functional change. Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Support generation of native or tagged Ethernet header for encap header, depending on provided net device. Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Generate encap header depending on the routed device to support native/tagged Ethernet header. Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
vport system image guid should be queried using vport nic API for Ethernet ports, and vport hca API for Infiniband ports. Fixes: fadd59f ("net/mlx5: Introduce inter-device communication mechanism") Signed-off-by: Aviv Heller <avivh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
If CONFIG_MLX5_ESWITCH is not defined, test for SR-IOV being disabled, instead of calling e-switch LAG prereq routine. Since LAG with SRIOV is allowed only when switchdev mode is on. Fixes: eff849b ("net/mlx5: Allow/disallow LAG according to pre-req only") Signed-off-by: Aviv Heller <avivh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
…t/klassert/ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2018-12-20 Two last patches for this release cycle: 1) Remove an unused variable in xfrm_policy_lookup_bytype(). From YueHaibing. 2) Fix possible infinite loop in __xfrm6_tunnel_alloc_spi(). Also from YueHaibing. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
The major changes are in the flow offload firmware APIs. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Set hwrm_intr_seq_id value to its inverted value instead of HWRM_SEQ_INVALID, when an hwrm completion of type CMPL_BASE_TYPE_HWRM_DONE is received. This will enable us to use the complete 16-bit sequence ID space. Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation for adding a 2nd communication channel to firmware. Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Typecast hwrm_cmd_resp_addr to (u8 *) from (void *) before doing arithmetic. Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
…tines. These routines will be enhanced in the subsequent patch to return the 2nd firmware comm. channel's hwrm response address & sequence id respectively. Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Earlier, some of the firmware commands (ex: CFA_FLOW_*) which are processed by KONG processor were sent to the CHIMP processor from the host. This approach was taken as there was no direct message channel to KONG. CHIMP in turn used to send them to KONG. Newer firmware supports a new message channel which the host can send messages directly to the KONG processor. This patch adds support for required changes needed in the driver to support direct KONG message channel. This speeds up flow related messages sent to the firmware for CLS_FLOWER offload. Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
To support level 2 context page memory structures, enhance the bnxt_ring_mem_info structure with a "depth" field to specify the page level and add a flag to specify using full pages for L1 and L2 page tables. This is needed to support RDMA functionality on 57500 chips since RDMA requires more context memory. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Add the new functions bnxt_alloc_ctx_pg_tbls()/bnxt_free_ctx_pg_tbls() to allocate and free pages for context memory. The new functions will handle the different levels of paging support and allocate/free the pages accordingly using the existing functions. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
If RDMA is supported on the 57500 chip, increase context memory allocations for the resources used by RDMA. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Older firmware only supports 16-bit flow handle, because of which the number of flows that can be offloaded can’t scale beyond a point. Newer firmware supports 64-bit flow handle enabling the host to scale upto millions of flows. With the new 64-bit flow handle support, driver has to query flow stats in a different way compared to the older approach. This patch adds support for 64-bit flow handle and new way to query flow stats. Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com> Reviewed-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
For a little better performance on faster machines and faster link speeds. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan says: ==================== bnxt_en: Update for net-next. Three main changes in this series, besides the usual firmware spec update: 1. Add support for a new firmware communication channel direct to the firmware processor that handles flow offloads. This speeds up flow offload operations. 2. Use 64-bit internal flow handles to increase the number of flows that can be offloaded. 3. Add level-2 context memory paging so that we can configure more context memory for RDMA on the 57500 chips. Allocate more context memory if RDMA is enabled on the 57500 chips. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
We seem to have no JSET instruction test, and LLVM does not generate it at all, so let's add a simple hand-coded test to make sure JIT implementations are correct. v2: - extend test_verifier to handle multiple inputs and add the sample there (Daniel) - add a sign extension case Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
…ction Some JITs (nfp) try to optimize code on their own. It could make sense in case of BPF_JSET instruction which is currently not interpreted by the verifier, meaning for instance that dead could would not be detected if it was under BPF_JSET branch. Teach the verifier basics of BPF_JSET, JIT optimizations will be removed shortly. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Jiong Wang <jiong.wang@netronome.com> Acked-by: Edward Cree <ecree@solarflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Validate that the verifier reasons correctly about the bounds and removes dead code based on results of JSET instruction. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reorder the calls to check_max_stack_depth() and sanitize_dead_code() to separate functions which can rewrite instructions from pure checks. No functional changes. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The verifier will now understand the JSET instruction, so don't mark the dead branch in the JIT as noop. We won't generate any code, anyway. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The top word of the constant can only have bits set if sign extension set it to all-1, therefore we don't really have to mask the top half of the register. We can just OR it into the result as is. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
commit 435f90a ("selftests/bpf: add a test case for sock_ops perf-event notification") missed adding new test to gitignore. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Jakub Kicinski says: ==================== This is a v2 of the patch set to teach the verifier about BPF_JSET instruction. There is also a number of tests include for both basic functioning of the instruction and the verifier logic. The NFP JIT handling of JSET is tweaked. Last patch adds missing file to gitignore. Reposting part of previous series without the dead code elimination. ==================== Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/ath/ath10k/mac.c: In function 'ath10k_sta_state': drivers/net/wireless/ath/ath10k/mac.c:6238:7: warning: variable 'num_tdls_vifs' set but not used [-Wunused-but-set-variable] 'num_tdls_vifs' not used any more after 9a993cc ("ath10k: fix the logic of limiting tdls peer counts") Also, remove the single called function ath10k_mac_tdls_vifs_count and ath10k_mac_tdls_vifs_count_iter. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
drivers/net/ethernet/mellanox/mlx5/core/en_rep.c:1339:57-58: Unneeded semicolon Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci Fixes: 4c8fb29 ("net/mlx5e: Increase VF representors' SQ size to 128") CC: Gavi Teitz <gavi@mellanox.com> Signed-off-by: kbuild test robot <fengguang.wu@intel.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
ip l add tun type gretap external ip r a 10.0.0.2 encap ip id 1000 dst 172.168.0.2 key dev tun ip a a 10.0.0.1/24 dev tun The peer arp request to 10.0.0.1 with tunnel_id, but the arp reply only set the tun_id but not the tun_flags with TUNNEL_KEY. The arp reply packet don't contain tun_id field. Signed-off-by: wenxu <wenxu@ucloud.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
Drop LIST_HEAD where the variable it declares is never used. These became useless in 244cd96 ("net_sched: remove list_head from tc_action") The semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier x; @@ - LIST_HEAD(x); ... when != x // </smpl> Fixes: 244cd96 ("net_sched: remove list_head from tc_action") Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Drop LIST_HEAD where the variable it declares is never used. The uses were removed in 244cd96 ("net_sched: remove list_head from tc_action"), but not the declaration. The semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier x; @@ - LIST_HEAD(x); ... when != x // </smpl> Fixes: 244cd96 ("net_sched: remove list_head from tc_action") Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
Drop LIST_HEAD where the variable it declares has never been used. The semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier x; @@ - LIST_HEAD(x); ... when != x // </smpl> Fixes: c82e9aa ("mlx4_core: resource tracking for HCA resources used by guests") Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
Packet sockets may call dev_header_parse with NULL daddr. Make lowpan_header_ops.create fail. Fixes: 87a93e4 ("ieee802154: change needed headroom/tailroom") Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Alexander Aring <aring@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
In tipc_nl_compat_sk_dump(), if nla_parse_nested() fails, it could return an error. To be consistent with other invocations of the function call, on error, the fix passes the return value upstream. Signed-off-by: Aditya Pakki <pakki001@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
In net_ns_init(), register_pernet_subsys() could fail while registering network namespace subsystems. The fix checks the return value and sends a panic() on failure. Signed-off-by: Aditya Pakki <pakki001@umn.edu> Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This happened when I tried to boot normal Fedora 29 system with latest available kernel (from fedora rawhide, plus some unrelated custom patches): BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 PGD 0 P4D 0 Oops: 0010 [#1] SMP PTI CPU: 6 PID: 1422 Comm: libvirtd Tainted: G I 4.20.0-0.rc7.git3.hpsa2.1.fc29.x86_64 #1 Hardware name: HP ProLiant BL460c G6, BIOS I24 05/21/2018 RIP: 0010: (null) Code: Bad RIP value. RSP: 0018:ffffa47ccdc9fbe0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000000003e8 RCX: ffffa47ccdc9fbf8 RDX: ffffa47ccdc9fc00 RSI: ffff97d9ee7b01f8 RDI: ffff97d9f0150b80 RBP: ffff97d9f0150b80 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000003 R13: ffff97d9ef1e53e8 R14: 0000000000000009 R15: ffff97d9f0ac6730 FS: 00007f4d224ef700(0000) GS:ffff97d9fa200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 00000011ece52006 CR4: 00000000000206e0 Call Trace: ? bnx2x_chip_cleanup+0x195/0x610 [bnx2x] ? bnx2x_nic_unload+0x1e2/0x8f0 [bnx2x] ? bnx2x_reload_if_running+0x24/0x40 [bnx2x] ? bnx2x_set_features+0x79/0xa0 [bnx2x] ? __netdev_update_features+0x244/0x9e0 ? netlink_broadcast_filtered+0x136/0x4b0 ? netdev_update_features+0x22/0x60 ? dev_disable_lro+0x1c/0xe0 ? devinet_sysctl_forward+0x1c6/0x211 ? proc_sys_call_handler+0xab/0x100 ? __vfs_write+0x36/0x1a0 ? rcu_read_lock_sched_held+0x79/0x80 ? rcu_sync_lockdep_assert+0x2e/0x60 ? __sb_start_write+0x14c/0x1b0 ? vfs_write+0x159/0x1c0 ? vfs_write+0xba/0x1c0 ? ksys_write+0x52/0xc0 ? do_syscall_64+0x60/0x1f0 ? entry_SYSCALL_64_after_hwframe+0x49/0xbe After some investigation I figured out that recently added cleanup code tries to call VLAN filtering de-initialization function which exist only for newer hardware. Corresponding function pointer is not set (== 0) for older hardware, namely these chips: #define CHIP_NUM_57710 0x164e #define CHIP_NUM_57711 0x164f #define CHIP_NUM_57711E 0x1650 And I have one of those in my test system: Broadcom Inc. and subsidiaries NetXtreme II BCM57711E 10-Gigabit PCIe [14e4:1650] Function bnx2x_init_vlan_mac_fp_objs() from drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h decides whether to initialize relevant pointers in bnx2x_sp_objs.vlan_obj or not. This regression was introduced after v4.20-rc7, and still exists in v4.20 release. Fixes: 04f0523 ("bnx2x: Remove configured vlans as part of unload sequence.") Signed-off-by: Ivan Mironov <mironov.ivan@gmail.com> Signed-off-by: Ivan Mironov <mironov.ivan@gmail.com> Acked-by: Sudarsana Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The two different assignments for pkt_len are actually the same and
so the if statement is redundant and can be removed. Masking a u8
return value from inb() with 0xFF is also redundant and can also be
emoved.
Similarly, the two different outb calls are identical as the mask
of 0xff on the second outb is redundant since a u8 is being written,
so the if statement is also redundant and can be also removed.
Detected by CoverityScan, CID#1475639 ("Identical code for different
branches")
V2: Remove the if statement for the outb calls, thanks to David
Miller for spotting this.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Patch eedbbb0 "net: dccp: initialize (addr,port) ..." added calling to inet_hashinfo2_init() from dccp_init(). However, inet_hashinfo2_init() is marked as __init(), and thus the kernel panics when dccp is loaded as module. Removing __init() tag from inet_hashinfo2_init() is not feasible because it calls into __init functions in mm. This patch adds inet_hashinfo2_init_mod() function that can be called after the init phase is done; changes dccp_init() to call the new function; un-marks inet_hashinfo2_init() as exported. Fixes: eedbbb0 ("net: dccp: initialize (addr,port) ...") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Peter Oskolkov <posk@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Pull in bug fixes before respinning my net-next pull request. Signed-off-by: David S. Miller <davem@davemloft.net>
Caused by making the variable static: kernel/sched/fair.c:119:21: warning: 'capacity_margin' defined but not used [-Wunused-variable] Seems easiest to just move it up under the existing ifdef CONFIG_SMP that's a few lines above. Fixes: ed8885a ('sched/fair: Make some variables static') Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
…el/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Notable changes:
- Mitigations for Spectre v2 on some Freescale (NXP) CPUs.
- A large series adding support for pass-through of Nvidia V100 GPUs
to guests on Power9.
- Another large series to enable hardware assistance for TLB table
walk on MPC8xx CPUs.
- Some preparatory changes to our DMA code, to make way for further
cleanups from Christoph.
- Several fixes for our Transactional Memory handling discovered by
fuzzing the signal return path.
- Support for generating our system call table(s) from a text file
like other architectures.
- A fix to our page fault handler so that instead of generating a
WARN_ON_ONCE, user accesses of kernel addresses instead print a
ratelimited and appropriately scary warning.
- A cosmetic change to make our unhandled page fault messages more
similar to other arches and also more compact and informative.
- Freescale updates from Scott:
"Highlights include elimination of legacy clock bindings use from
dts files, an 83xx watchdog handler, fixes to old dts interrupt
errors, and some minor cleanup."
And many clean-ups, reworks and minor fixes etc.
Thanks to: Alexandre Belloni, Alexey Kardashevskiy, Andrew Donnellan,
Aneesh Kumar K.V, Arnd Bergmann, Benjamin Herrenschmidt, Breno Leitao,
Christian Lamparter, Christophe Leroy, Christoph Hellwig, Daniel
Axtens, Darren Stevens, David Gibson, Diana Craciun, Dmitry V. Levin,
Firoz Khan, Geert Uytterhoeven, Greg Kurz, Gustavo Romero, Hari
Bathini, Joel Stanley, Kees Cook, Madhavan Srinivasan, Mahesh
Salgaonkar, Markus Elfring, Mathieu Malaterre, Michal Suchánek, Naveen
N. Rao, Nick Desaulniers, Oliver O'Halloran, Paul Mackerras, Ram Pai,
Ravi Bangoria, Rob Herring, Russell Currey, Sabyasachi Gupta, Sam
Bobroff, Satheesh Rajendran, Scott Wood, Segher Boessenkool, Stephen
Rothwell, Tang Yuantian, Thiago Jung Bauermann, Yangtao Li, Yuantian
Tang, Yue Haibing"
* tag 'powerpc-4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (201 commits)
Revert "powerpc/fsl_pci: simplify fsl_pci_dma_set_mask"
powerpc/zImage: Also check for stdout-path
powerpc: Fix HMIs on big-endian with CONFIG_RELOCATABLE=y
macintosh: Use of_node_name_{eq, prefix} for node name comparisons
ide: Use of_node_name_eq for node name comparisons
powerpc: Use of_node_name_eq for node name comparisons
powerpc/pseries/pmem: Convert to %pOFn instead of device_node.name
powerpc/mm: Remove very old comment in hash-4k.h
powerpc/pseries: Fix node leak in update_lmb_associativity_index()
powerpc/configs/85xx: Enable CONFIG_DEBUG_KERNEL
powerpc/dts/fsl: Fix dtc-flagged interrupt errors
clk: qoriq: add more compatibles strings
powerpc/fsl: Use new clockgen binding
powerpc/83xx: handle machine check caused by watchdog timer
powerpc/fsl-rio: fix spelling mistake "reserverd" -> "reserved"
powerpc/fsl_pci: simplify fsl_pci_dma_set_mask
arch/powerpc/fsl_rmu: Use dma_zalloc_coherent
vfio_pci: Add NVIDIA GV100GL [Tesla V100 SXM2] subdriver
vfio_pci: Allow regions to add own capabilities
vfio_pci: Allow mapping extra regions
...
…rnel/git/kees/linux Pull pstore updates from Kees Cook: "Improvements and refactorings: - Improve compression handling - Refactor argument handling during initialization - Avoid needless locking for saner EFI backend handling - Add more kern-doc and improve debugging output" * tag 'pstore-v4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: pstore/ram: Avoid NULL deref in ftrace merging failure path pstore: Convert buf_lock to semaphore pstore: Fix bool initialization/comparison pstore/ram: Do not treat empty buffers as valid pstore/ram: Simplify ramoops_get_next_prz() arguments pstore: Map PSTORE_TYPE_* to strings pstore: Replace open-coded << with BIT() pstore: Improve and update some comments and status output pstore/ram: Add kern-doc for struct persistent_ram_zone pstore/ram: Report backend assignments with finer granularity pstore/ram: Standardize module name in ramoops pstore: Avoid duplicate call of persistent_ram_zap() pstore: Remove needless lock during console writes pstore: Do not use crash buffer for decompression
…ux/kernel/git/kees/linux Pull gcc-plugins update from Kees Cook: "Both arm and arm64 are gaining per-task stack canaries (to match x86), but arm is being done with a gcc plugin, hence it going through the gcc-plugins tree. New gcc-plugin: - Enable per-task stack protector for ARM (Ard Biesheuvel)" * tag 'gcc-plugins-v4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: ARM: smp: add support for per-task stack canaries
…nel/git/pmladek/printk Pull printk updates from Petr Mladek: - Keep spinlocks busted until the end of panic() - Fix races between calculating number of messages that would fit into user space buffers, filling the buffers, and switching printk.time parameter - Some code clean up * tag 'printk-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: printk: Remove print_prefix() calls with NULL buffer. printk: fix printk_time race. printk: Make printk_emit() local function. panic: avoid deadlocks in re-entrant console drivers
…ernel/git/pcmoore/audit Pull audit updates from Paul Moore: "In the finest of holiday of traditions, I have a number of gifts to share today. While most of them are re-gifts from others, unlike the typical re-gift, these are things you will want in and around your tree; I promise. This pull request is perhaps a bit larger than our typical PR, but most of it comes from Jan's rework of audit's fanotify code; a very welcome improvement. We ran this through our normal regression tests, as well as some newly created stress tests and everything looks good. Richard added a few patches, mostly cleaning up a few things and and shortening some of the audit records that we send to userspace; a change the userspace folks are quite happy about. Finally YueHaibing and I kick in a few patches to simplify things a bit and make the code less prone to errors. Lastly, I want to say thanks one more time to everyone who has contributed patches, testing, and code reviews for the audit subsystem over the past year. The project is what it is due to your help and contributions - thank you" * tag 'audit-pr-20181224' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: (22 commits) audit: remove duplicated include from audit.c audit: shorten PATH cap values when zero audit: use current whenever possible audit: minimize our use of audit_log_format() audit: remove WATCH and TREE config options audit: use session_info helper audit: localize audit_log_session_info prototype audit: Use 'mark' name for fsnotify_mark variables audit: Replace chunk attached to mark instead of replacing mark audit: Simplify locking around untag_chunk() audit: Drop all unused chunk nodes during deletion audit: Guarantee forward progress of chunk untagging audit: Allocate fsnotify mark independently of chunk audit: Provide helper for dropping mark's chunk reference audit: Remove pointless check in insert_hash() audit: Factor out chunk replacement code audit: Make hash table insertion safe against concurrent lookups audit: Embed key into chunk audit: Fix possible tagging failures audit: Fix possible spurious -ENOSPC error ...
…/kernel/git/pcmoore/selinux Pull selinux patches from Paul Moore: "I already used my best holiday pull request lines in the audit pull request, so this one is going to be a bit more boring, sorry about that. To make up for this, we do have a birthday of sorts to celebrate: SELinux turns 18 years old this December. Perhaps not the most exciting thing in the world for most people, but I think it's safe to say that anyone reading this email doesn't exactly fall into the "most people" category. Back to business and the pull request itself: Ondrej has five patches in this pull request and I lump them into three categories: one patch to always allow submounts (using similar logic to elsewhere in the kernel), one to fix some issues with the SELinux policydb, and the others to cleanup and improve the SELinux sidtab. The other patches from Alexey and Petr and trivial fixes that are adequately described in their respective subject lines. With this last pull request of the year, I want to thank everyone who has contributed patches, testing, and reviews to the SELinux project this year, and the past 18 years. Like any good open source effort, SELinux is only as good as the community which supports it, and I'm very happy that we have the community we do - thank you all!" * tag 'selinux-pr-20181224' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: overhaul sidtab to fix bug and improve performance selinux: use separate table for initial SID lookup selinux: make "selinux_policycap_names[]" const char * selinux: always allow mounting submounts selinux: refactor sidtab conversion Documentation: Update SELinux reference policy URL selinux: policydb - fix byte order and alignment issues
…nel/git/jmorris/linux-security Pull general security subsystem updates from James Morris: "The main changes here are Paul Gortmaker's removal of unneccesary module.h infrastructure" * 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: security: integrity: partial revert of make ima_main explicitly non-modular security: fs: make inode explicitly non-modular security: audit and remove any unnecessary uses of module.h security: integrity: make evm_main explicitly non-modular keys: remove needless modular infrastructure from ecryptfs_format security: integrity: make ima_main explicitly non-modular tomoyo: fix small typo
…ernel/git/jeyu/linux Pull modules updates from Jessica Yu: - Some modules-related kallsyms cleanups and a kallsyms fix for ARM. - Include keys from the secondary keyring in module signature verification. * tag 'modules-for-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: ARM: module: Fix function kallsyms on Thumb-2 module: Overwrite st_size instead of st_info module: make it clearer when we're handling kallsyms symbols vs exported symbols modsign: use all trusted keys to verify module signature
Pull networking updates from David Miller:
1) New ipset extensions for matching on destination MAC addresses, from
Stefano Brivio.
2) Add ipv4 ttl and tos, plus ipv6 flow label and hop limit offloads to
nfp driver. From Stefano Brivio.
3) Implement GRO for plain UDP sockets, from Paolo Abeni.
4) Lots of work from Michał Mirosław to eliminate the VLAN_TAG_PRESENT
bit so that we could support the entire vlan_tci value.
5) Rework the IPSEC policy lookups to better optimize more usecases,
from Florian Westphal.
6) Infrastructure changes eliminating direct manipulation of SKB lists
wherever possible, and to always use the appropriate SKB list
helpers. This work is still ongoing...
7) Lots of PHY driver and state machine improvements and
simplifications, from Heiner Kallweit.
8) Various TSO deferral refinements, from Eric Dumazet.
9) Add ntuple filter support to aquantia driver, from Dmitry Bogdanov.
10) Batch dropping of XDP packets in tuntap, from Jason Wang.
11) Lots of cleanups and improvements to the r8169 driver from Heiner
Kallweit, including support for ->xmit_more. This driver has been
getting some much needed love since he started working on it.
12) Lots of new forwarding selftests from Petr Machata.
13) Enable VXLAN learning in mlxsw driver, from Ido Schimmel.
14) Packed ring support for virtio, from Tiwei Bie.
15) Add new Aquantia AQtion USB driver, from Dmitry Bezrukov.
16) Add XDP support to dpaa2-eth driver, from Ioana Ciocoi Radulescu.
17) Implement coalescing on TCP backlog queue, from Eric Dumazet.
18) Implement carrier change in tun driver, from Nicolas Dichtel.
19) Support msg_zerocopy in UDP, from Willem de Bruijn.
20) Significantly improve garbage collection of neighbor objects when
the table has many PERMANENT entries, from David Ahern.
21) Remove egdev usage from nfp and mlx5, and remove the facility
completely from the tree as it no longer has any users. From Oz
Shlomo and others.
22) Add a NETDEV_PRE_CHANGEADDR so that drivers can veto the change and
therefore abort the operation before the commit phase (which is the
NETDEV_CHANGEADDR event). From Petr Machata.
23) Add indirect call wrappers to avoid retpoline overhead, and use them
in the GRO code paths. From Paolo Abeni.
24) Add support for netlink FDB get operations, from Roopa Prabhu.
25) Support bloom filter in mlxsw driver, from Nir Dotan.
26) Add SKB extension infrastructure. This consolidates the handling of
the auxiliary SKB data used by IPSEC and bridge netfilter, and is
designed to support the needs to MPTCP which could be integrated in
the future.
27) Lots of XDP TX optimizations in mlx5 from Tariq Toukan.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1845 commits)
net: dccp: fix kernel crash on module load
drivers/net: appletalk/cops: remove redundant if statement and mask
bnx2x: Fix NULL pointer dereference in bnx2x_del_all_vlans() on some hw
net/net_namespace: Check the return value of register_pernet_subsys()
net/netlink_compat: Fix a missing check of nla_parse_nested
ieee802154: lowpan_header_create check must check daddr
net/mlx4_core: drop useless LIST_HEAD
mlxsw: spectrum: drop useless LIST_HEAD
net/mlx5e: drop useless LIST_HEAD
iptunnel: Set tun_flags in the iptunnel_metadata_reply from src
net/mlx5e: fix semicolon.cocci warnings
staging: octeon: fix build failure with XFRM enabled
net: Revert recent Spectre-v1 patches.
can: af_can: Fix Spectre v1 vulnerability
packet: validate address length if non-zero
nfc: af_nfc: Fix Spectre v1 vulnerability
phonet: af_phonet: Fix Spectre v1 vulnerability
net: core: Fix Spectre v1 vulnerability
net: minor cleanup in skb_ext_add()
net: drop the unused helper skb_ext_get()
...
…/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Add 1472-byte test to tcrypt for IPsec - Reintroduced crypto stats interface with numerous changes - Support incremental algorithm dumps Algorithms: - Add xchacha12/20 - Add nhpoly1305 - Add adiantum - Add streebog hash - Mark cts(cbc(aes)) as FIPS allowed Drivers: - Improve performance of arm64/chacha20 - Improve performance of x86/chacha20 - Add NEON-accelerated nhpoly1305 - Add SSE2 accelerated nhpoly1305 - Add AVX2 accelerated nhpoly1305 - Add support for 192/256-bit keys in gcmaes AVX - Add SG support in gcmaes AVX - ESN for inline IPsec tx in chcr - Add support for CryptoCell 703 in ccree - Add support for CryptoCell 713 in ccree - Add SM4 support in ccree - Add SM3 support in ccree - Add support for chacha20 in caam/qi2 - Add support for chacha20 + poly1305 in caam/jr - Add support for chacha20 + poly1305 in caam/qi2 - Add AEAD cipher support in cavium/nitrox" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (130 commits) crypto: skcipher - remove remnants of internal IV generators crypto: cavium/nitrox - Fix build with !CONFIG_DEBUG_FS crypto: salsa20-generic - don't unnecessarily use atomic walk crypto: skcipher - add might_sleep() to skcipher_walk_virt() crypto: x86/chacha - avoid sleeping under kernel_fpu_begin() crypto: cavium/nitrox - Added AEAD cipher support crypto: mxc-scc - fix build warnings on ARM64 crypto: api - document missing stats member crypto: user - remove unused dump functions crypto: chelsio - Fix wrong error counter increments crypto: chelsio - Reset counters on cxgb4 Detach crypto: chelsio - Handle PCI shutdown event crypto: chelsio - cleanup:send addr as value in function argument crypto: chelsio - Use same value for both channel in single WR crypto: chelsio - Swap location of AAD and IV sent in WR crypto: chelsio - remove set but not used variable 'kctx_len' crypto: ux500 - Use proper enum in hash_set_dma_transfer crypto: ux500 - Use proper enum in cryp_set_dma_transfer crypto: aesni - Add scatter/gather avx stubs, and use them in C crypto: aesni - Introduce partial block macro ..
pull bot
pushed a commit
that referenced
this pull request
Jun 22, 2019
…_domain_lock" This reverts commit 7560cc3. With 5.2.0-rc5 I can easily trigger this with lockdep and iommu=pt: ====================================================== WARNING: possible circular locking dependency detected 5.2.0-rc5 #78 Not tainted ------------------------------------------------------ swapper/0/1 is trying to acquire lock: 00000000ea2b3beb (&(&iommu->lock)->rlock){+.+.}, at: domain_context_mapping_one+0xa5/0x4e0 but task is already holding lock: 00000000a681907b (device_domain_lock){....}, at: domain_context_mapping_one+0x8d/0x4e0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (device_domain_lock){....}: _raw_spin_lock_irqsave+0x3c/0x50 dmar_insert_one_dev_info+0xbb/0x510 domain_add_dev_info+0x50/0x90 dev_prepare_static_identity_mapping+0x30/0x68 intel_iommu_init+0xddd/0x1422 pci_iommu_init+0x16/0x3f do_one_initcall+0x5d/0x2b4 kernel_init_freeable+0x218/0x2c1 kernel_init+0xa/0x100 ret_from_fork+0x3a/0x50 -> #0 (&(&iommu->lock)->rlock){+.+.}: lock_acquire+0x9e/0x170 _raw_spin_lock+0x25/0x30 domain_context_mapping_one+0xa5/0x4e0 pci_for_each_dma_alias+0x30/0x140 dmar_insert_one_dev_info+0x3b2/0x510 domain_add_dev_info+0x50/0x90 dev_prepare_static_identity_mapping+0x30/0x68 intel_iommu_init+0xddd/0x1422 pci_iommu_init+0x16/0x3f do_one_initcall+0x5d/0x2b4 kernel_init_freeable+0x218/0x2c1 kernel_init+0xa/0x100 ret_from_fork+0x3a/0x50 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(device_domain_lock); lock(&(&iommu->lock)->rlock); lock(device_domain_lock); lock(&(&iommu->lock)->rlock); *** DEADLOCK *** 2 locks held by swapper/0/1: #0: 00000000033eb13d (dmar_global_lock){++++}, at: intel_iommu_init+0x1e0/0x1422 #1: 00000000a681907b (device_domain_lock){....}, at: domain_context_mapping_one+0x8d/0x4e0 stack backtrace: CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.2.0-rc5 #78 Hardware name: LENOVO 20KGS35G01/20KGS35G01, BIOS N23ET50W (1.25 ) 06/25/2018 Call Trace: dump_stack+0x85/0xc0 print_circular_bug.cold.57+0x15c/0x195 __lock_acquire+0x152a/0x1710 lock_acquire+0x9e/0x170 ? domain_context_mapping_one+0xa5/0x4e0 _raw_spin_lock+0x25/0x30 ? domain_context_mapping_one+0xa5/0x4e0 domain_context_mapping_one+0xa5/0x4e0 ? domain_context_mapping_one+0x4e0/0x4e0 pci_for_each_dma_alias+0x30/0x140 dmar_insert_one_dev_info+0x3b2/0x510 domain_add_dev_info+0x50/0x90 dev_prepare_static_identity_mapping+0x30/0x68 intel_iommu_init+0xddd/0x1422 ? printk+0x58/0x6f ? lockdep_hardirqs_on+0xf0/0x180 ? do_early_param+0x8e/0x8e ? e820__memblock_setup+0x63/0x63 pci_iommu_init+0x16/0x3f do_one_initcall+0x5d/0x2b4 ? do_early_param+0x8e/0x8e ? rcu_read_lock_sched_held+0x55/0x60 ? do_early_param+0x8e/0x8e kernel_init_freeable+0x218/0x2c1 ? rest_init+0x230/0x230 kernel_init+0xa/0x100 ret_from_fork+0x3a/0x50 domain_context_mapping_one() is taking device_domain_lock first then iommu lock, while dmar_insert_one_dev_info() is doing the reverse. That should be introduced by commit: 7560cc3 ("iommu/vt-d: Fix lock inversion between iommu->lock and device_domain_lock", 2019-05-27) So far I still cannot figure out how the previous deadlock was triggered (I cannot find iommu lock taken before calling of iommu_flush_dev_iotlb()), however I'm pretty sure that that change should be incomplete at least because it does not fix all the places so we're still taking the locks in different orders, while reverting that commit is very clean to me so far that we should always take device_domain_lock first then the iommu lock. We can continue to try to find the real culprit mentioned in 7560cc3, but for now I think we should revert it to fix current breakage. CC: Joerg Roedel <joro@8bytes.org> CC: Lu Baolu <baolu.lu@linux.intel.com> CC: dave.jiang@intel.com Signed-off-by: Peter Xu <peterx@redhat.com> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Joerg Roedel <jroedel@suse.de>
pull bot
pushed a commit
that referenced
this pull request
Feb 15, 2020
# perf trace -e syscalls:sys_enter_prctl --filter="option==SET_NAME"
0.000 Socket Thread/3860 syscalls:sys_enter_prctl(option: SET_NAME, arg2: 0x7fc50b9733e8)
0.053 SSL Cert #78/3860 syscalls:sys_enter_prctl(option: SET_NAME, arg2: 0x7fc50b9733e8)
^C #
If one uses '-v' with 'perf trace', we can see the filter it puts in
place:
New filter for syscalls:sys_enter_prctl: (option==0xf) && (common_pid != 3859 && common_pid != 2757)
We still need to allow using plain '-e prctl' and have this turn into
creating a 'syscalls:sys_enter_prctl' event so that the filter can be
applied only to it as right now '-e prctl' ends up using the
'raw_syscalls:sys_enter/sys_exit'.
The end goal is to have something like:
# perf trace -e prctl/option==SET_NAME/
And have that use tracepoint filters or eBPF ones.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
pull bot
pushed a commit
that referenced
this pull request
Apr 25, 2020
…ation After allowing parallel tuple insertion, we get the following trace: [ 5505.142249] ------------[ cut here ]------------ [ 5505.148155] WARNING: CPU: 21 PID: 13313 at lib/radix-tree.c:581 delete_node+0x16c/0x180 [ 5505.295553] CPU: 21 PID: 13313 Comm: kworker/u50:22 Tainted: G OE 5.6.0+ #78 [ 5505.304824] Hardware name: Supermicro Super Server/X10DRT-P, BIOS 2.0b 03/30/2017 [ 5505.313740] Workqueue: nf_flow_table_offload flow_offload_work_handler [nf_flow_table] [ 5505.323257] RIP: 0010:delete_node+0x16c/0x180 [ 5505.349862] RSP: 0018:ffffb19184eb7b30 EFLAGS: 00010282 [ 5505.356785] RAX: 0000000000000000 RBX: ffff904ac95b86d8 RCX: ffff904b6f938838 [ 5505.365190] RDX: 0000000000000000 RSI: ffff904ac954b908 RDI: ffff904ac954b920 [ 5505.373628] RBP: ffff904b4ac13060 R08: 0000000000000001 R09: 0000000000000000 [ 5505.382155] R10: 0000000000000000 R11: 0000000000000040 R12: 0000000000000000 [ 5505.390527] R13: ffffb19184eb7bfc R14: ffff904b6bef5800 R15: ffff90482c1203c0 [ 5505.399246] FS: 0000000000000000(0000) GS:ffff904c2fc80000(0000) knlGS:0000000000000000 [ 5505.408621] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5505.415739] CR2: 00007f5d27006010 CR3: 0000000058c10006 CR4: 00000000001626e0 [ 5505.424547] Call Trace: [ 5505.428429] idr_alloc_u32+0x7b/0xc0 [ 5505.433803] mlx5_tc_ct_entry_add_rule+0xbf/0x950 [mlx5_core] [ 5505.441354] ? mlx5_fc_create+0x23c/0x370 [mlx5_core] [ 5505.448225] mlx5_tc_ct_block_flow_offload+0x874/0x10b0 [mlx5_core] [ 5505.456278] ? mlx5_tc_ct_block_flow_offload+0x63d/0x10b0 [mlx5_core] [ 5505.464532] nf_flow_offload_tuple.isra.21+0xc5/0x140 [nf_flow_table] [ 5505.472286] ? __kmalloc+0x217/0x2f0 [ 5505.477093] ? flow_rule_alloc+0x1c/0x30 [ 5505.482117] flow_offload_work_handler+0x1d0/0x290 [nf_flow_table] [ 5505.489674] ? process_one_work+0x17c/0x580 [ 5505.494922] process_one_work+0x202/0x580 [ 5505.500082] ? process_one_work+0x17c/0x580 [ 5505.505696] worker_thread+0x4c/0x3f0 [ 5505.510458] kthread+0x103/0x140 [ 5505.514989] ? process_one_work+0x580/0x580 [ 5505.520616] ? kthread_bind+0x10/0x10 [ 5505.525837] ret_from_fork+0x3a/0x50 [ 5505.570841] ---[ end trace 07995de9c56d6831 ]--- This happens from parallel deletes/adds to idr, as idr isn't protected. Fix that by using xarray as the tuple_ids allocator instead of idr. Fixes: 7da182a ("netfilter: flowtable: Use work entry per offload command") Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Oz Shlomo <ozsh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
pull bot
pushed a commit
that referenced
this pull request
Dec 16, 2020
CHECK: Alignment should match open parenthesis #24: FILE: drivers/mfd/tps65910.c:296: + ret = regmap_clear_bits(tps65910->regmap, TPS65910_DEVCTRL, DEVCTRL_CK32K_CTRL_MASK); CHECK: Alignment should match open parenthesis #33: FILE: drivers/mfd/tps65910.c:318: + ret = regmap_set_bits(tps65910->regmap, TPS65910_DEVCTRL, DEVCTRL_DEV_SLP_MASK); CHECK: Alignment should match open parenthesis #42: FILE: drivers/mfd/tps65910.c:326: + ret = regmap_set_bits(tps65910->regmap, TPS65910_SLEEP_KEEP_RES_ON, CHECK: Alignment should match open parenthesis #51: FILE: drivers/mfd/tps65910.c:336: + ret = regmap_set_bits(tps65910->regmap, TPS65910_SLEEP_KEEP_RES_ON, CHECK: Alignment should match open parenthesis #60: FILE: drivers/mfd/tps65910.c:346: + ret = regmap_set_bits(tps65910->regmap, TPS65910_SLEEP_KEEP_RES_ON, CHECK: Alignment should match open parenthesis #69: FILE: drivers/mfd/tps65910.c:358: + regmap_clear_bits(tps65910->regmap, TPS65910_DEVCTRL, DEVCTRL_DEV_SLP_MASK); CHECK: Alignment should match open parenthesis #78: FILE: drivers/mfd/tps65910.c:440: + if (regmap_set_bits(tps65910->regmap, TPS65910_DEVCTRL, DEVCTRL_PWR_OFF_MASK) < 0) CHECK: Alignment should match open parenthesis #83: FILE: drivers/mfd/tps65910.c:444: + regmap_clear_bits(tps65910->regmap, TPS65910_DEVCTRL, DEVCTRL_DEV_ON_MASK); Signed-off-by: Lee Jones <lee.jones@linaro.org>
pull bot
pushed a commit
that referenced
this pull request
Mar 25, 2021
setup_fritz() in avmfritz.c might fail with -EIO and in this case the isac.type and isac.write_reg is not initialized and remains 0(NULL). A subsequent call to isac_release() will dereference isac->write_reg and crash. [ 1.737444] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 1.737809] #PF: supervisor instruction fetch in kernel mode [ 1.738106] #PF: error_code(0x0010) - not-present page [ 1.738378] PGD 0 P4D 0 [ 1.738515] Oops: 0010 [#1] SMP NOPTI [ 1.738711] CPU: 0 PID: 180 Comm: systemd-udevd Not tainted 5.12.0-rc2+ #78 [ 1.739077] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-48-gd9c812dda519-p rebuilt.qemu.org 04/01/2014 [ 1.739664] RIP: 0010:0x0 [ 1.739807] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. [ 1.740200] RSP: 0018:ffffc9000027ba10 EFLAGS: 00010202 [ 1.740478] RAX: 0000000000000000 RBX: ffff888102f41840 RCX: 0000000000000027 [ 1.740853] RDX: 00000000000000ff RSI: 0000000000000020 RDI: ffff888102f41800 [ 1.741226] RBP: ffffc9000027ba20 R08: ffff88817bc18440 R09: ffffc9000027b808 [ 1.741600] R10: 0000000000000001 R11: 0000000000000001 R12: ffff888102f41840 [ 1.741976] R13: 00000000fffffffb R14: ffff888102f41800 R15: ffff8881008b0000 [ 1.742351] FS: 00007fda3a38a8c0(0000) GS:ffff88817bc00000(0000) knlGS:0000000000000000 [ 1.742774] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1.743076] CR2: ffffffffffffffd6 CR3: 00000001021ec000 CR4: 00000000000006f0 [ 1.743452] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1.743828] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1.744206] Call Trace: [ 1.744339] isac_release+0xcc/0xe0 [mISDNipac] [ 1.744582] fritzpci_probe.cold+0x282/0x739 [avmfritz] [ 1.744861] local_pci_probe+0x48/0x80 [ 1.745063] pci_device_probe+0x10f/0x1c0 [ 1.745278] really_probe+0xfb/0x420 [ 1.745471] driver_probe_device+0xe9/0x160 [ 1.745693] device_driver_attach+0x5d/0x70 [ 1.745917] __driver_attach+0x8f/0x150 [ 1.746123] ? device_driver_attach+0x70/0x70 [ 1.746354] bus_for_each_dev+0x7e/0xc0 [ 1.746560] driver_attach+0x1e/0x20 [ 1.746751] bus_add_driver+0x152/0x1f0 [ 1.746957] driver_register+0x74/0xd0 [ 1.747157] ? 0xffffffffc00d8000 [ 1.747334] __pci_register_driver+0x54/0x60 [ 1.747562] AVM_init+0x36/0x1000 [avmfritz] [ 1.747791] do_one_initcall+0x48/0x1d0 [ 1.747997] ? __cond_resched+0x19/0x30 [ 1.748206] ? kmem_cache_alloc_trace+0x390/0x440 [ 1.748458] ? do_init_module+0x28/0x250 [ 1.748669] do_init_module+0x62/0x250 [ 1.748870] load_module+0x23ee/0x26a0 [ 1.749073] __do_sys_finit_module+0xc2/0x120 [ 1.749307] ? __do_sys_finit_module+0xc2/0x120 [ 1.749549] __x64_sys_finit_module+0x1a/0x20 [ 1.749782] do_syscall_64+0x38/0x90 Signed-off-by: Tong Zhang <ztong0001@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
See Commits and Changes for more details.
Created by
pull[bot]