[pull] master from torvalds:master #54
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
![pull[bot]](https://avatars.githubusercontent.com/in/12910?s=60&v=4){kind=small}
This was missed when tiles support was added in a revison and causes the driver to fail to load. Fixes: 9cf0c52 ("pinctrl: qcom: Add sdm660 pinctrl driver") Signed-off-by: Craig Tatlor <ctatlor97@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
We just changed the code so we apply bias disable on the correct register but forgot to align the register calculation. The result is that we apply the change on the correct register, but possibly at the incorrect offset/bit This went undetected because offsets tends to be the same between REG_PULL and REG_PULLEN for a given pin the EE controller. This is not true for the AO controller. Fixes: e39f9dd ("pinctrl: meson: fix pinconf bias disable") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Commit 6975a78 ("powerpc/boot: Allow building the zImage wrapper as a relocatable ET_DYN", 2011-04-12) changed the procedure descriptor at the start of crt0.S to have a hard-coded start address of 0x500000 rather than a reference to _zimage_start, presumably because having a reference to a symbol introduced a relocation which is awkward to handle in a position-independent executable. Unfortunately, what is at 0x500000 in the COFF image is not the first instruction, but the procedure descriptor itself, that is, a word containing 0x500000, which is not a valid instruction. Hence, booting a COFF zImage results in a "DEFAULT CATCH!, code=FFF00700" message from Open Firmware. This fixes the problem by (a) putting the procedure descriptor in the data section and (b) adding a branch to _zimage_start as the first instruction in the program. Fixes: 6975a78 ("powerpc/boot: Allow building the zImage wrapper as a relocatable ET_DYN") Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
For some configs the build fails with: arch/powerpc/mm/dump_linuxpagetables.c: In function 'populate_markers': arch/powerpc/mm/dump_linuxpagetables.c:306:39: error: 'PKMAP_BASE' undeclared (first use in this function) arch/powerpc/mm/dump_linuxpagetables.c:314:50: error: 'LAST_PKMAP' undeclared (first use in this function) These come from highmem.h, including that fixes the build. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The arch_teardown_msi_irqs() function assumes that controller ops pointers were already checked in arch_setup_msi_irqs(), but this assumption is wrong: arch_teardown_msi_irqs() can be called even when arch_setup_msi_irqs() returns an error (-ENOSYS). This can happen in the following scenario: - msi_capability_init() calls pci_msi_setup_msi_irqs() - pci_msi_setup_msi_irqs() returns -ENOSYS - msi_capability_init() notices the error and calls free_msi_irqs() - free_msi_irqs() calls pci_msi_teardown_msi_irqs() This is easier to see when CONFIG_PCI_MSI_IRQ_DOMAIN is not set and pci_msi_setup_msi_irqs() and pci_msi_teardown_msi_irqs() are just aliases to arch_setup_msi_irqs() and arch_teardown_msi_irqs(). The call to free_msi_irqs() upon pci_msi_setup_msi_irqs() failure seems legit, as it does additional cleanup; e.g. list_del(&entry->list) and kfree(entry) inside free_msi_irqs() do happen (MSI descriptors are allocated before pci_msi_setup_msi_irqs() is called and need to be cleaned up if that fails). Fixes: 6b2fd7e ("PCI/MSI/PPC: Remove arch_msi_check_device()") Cc: stable@vger.kernel.org # v3.18+ Signed-off-by: Radu Rendec <radu.rendec@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit 78e5dfe ("powerpc: dts: replace 'linux,stdout-path' with 'stdout-path'") broke the default console on a number of embedded PowerPC systems, because it failed to also update the code in arch/powerpc/kernel/legacy_serial.c to look for that property in addition to the old one. This fixes it. Fixes: 78e5dfe ("powerpc: dts: replace 'linux,stdout-path' with 'stdout-path'") Cc: stable@vger.kernel.org # v4.17+ Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Even if dsi->bridge is NULL, we still try to call drm_bridge_attach, and print out an error message, before creating the connector. When no bridge is provided, let's skip these 2 steps and directly create the connector. Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: CK Hu <ck.hu@mediatek.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Commit b244ffa ("drm/i915/gvt: Fix drm_format_mod value for vGPU plane") introduced a regression issue to the tiled memory decoding on BDW. This patch can fix this issue. Here is the issue detail: intel/gvt-linux#61 v1->v2: - Refine the commit message. (Zhenyu) Fixes: b244ffa("drm/i915/gvt: Fix drm_format_mod value for vGPU plane") Signed-off-by: Tina Zhang <tina.zhang@intel.com> Cc: stable@vger.kernel.org # v4.19+ Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
To enable later verification of GT workaround state at various stages of driver lifetime, we record the list of applicable ones per platforms to a list, from which they are also applied. The added data structure is a simple array of register, mask and value items, which is allocated on demand as workarounds are added to the list. This is a temporary implementation which later in the series gets fused with the existing per context workaround list handling. It is separated at this stage since the following patch fixes a bug which needs to be as easy to backport as possible. Also, since in the following patch we will be adding a new class of workarounds (per engine) which can be applied from interrupt context, we straight away make the provision for safe read-modify-write cycle. v2: * Change dev_priv to i915 along the init path. (Chris Wilson) * API rename. (Chris Wilson) v3: * Remove explicit list size tracking in favour of growing the allocation in power of two chunks. (Chris Wilson) v4: Chris Wilson: * Change wa_list_finish to early return. * Copy workarounds using the compiler for static checking. * Do not bother zeroing unused entries. * Re-order struct i915_wa_list. v5: * kmalloc_array. * Whitespace cleanup. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20181203133319.10174-1-tvrtko.ursulin@linux.intel.com (cherry picked from commit 25d140f) Fixes: 59b449d ("drm/i915: Split out functions for different kinds of workarounds") Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
We stopped re-applying the GT workarounds after engine reset since commit 59b449d ("drm/i915: Split out functions for different kinds of workarounds"). Issue with this is that some of the GT workarounds live in the MMIO space which gets lost during engine resets. So far the registers in 0x2xxx and 0xbxxx address range have been identified to be affected. This losing of applied workarounds has obvious negative effects and can even lead to hard system hangs (see the linked Bugzilla). Rather than just restoring this re-application, because we have also observed that it is not safe to just re-write all GT workarounds after engine resets (GPU might be live and weird hardware states can happen), we introduce a new class of per-engine workarounds and move only the affected GT workarounds over. Using the framework introduced in the previous patch, we therefore after engine reset, re-apply only the workarounds living in the affected MMIO address ranges. v2: * Move Wa_1406609255:icl to engine workarounds as well. * Rename API. (Chris Wilson) * Drop redundant IS_KABYLAKE. (Chris Wilson) * Re-order engine wa/ init so latest platforms are first. (Rodrigo Vivi) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Bugzilla: https://bugzilla.freedesktop.org/show_bug.cgi?id=107945 Fixes: 59b449d ("drm/i915: Split out functions for different kinds of workarounds") Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: intel-gfx@lists.freedesktop.org Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20181203133341.10258-1-tvrtko.ursulin@linux.intel.com (cherry picked from commit 4a15c75) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
…into drm-intel-fixes gvt-fixes-2018-12-04 - Fix tiling mode format on BDW for VFIO gfx dmabuf (Tina) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> From: Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181204050633.GY12743@zhen-hp.sh.intel.com
In commit 5e9dcb6 ("powerpc/boot: Expose Kconfig symbols to wrapper") we added a dependency to serial.c on autoconf.h: $(obj)/serial.c: $(obj)/autoconf.h This works when building in-tree (ie. with KBUILD_OUTPUT unset) because the obj tree is the src tree. But when building with eg. O=build and -j 1 the build fails: gcc ... -I../arch/powerpc/boot -c -o arch/powerpc/boot/serial.o arch/powerpc/boot/serial.c gcc: error: arch/powerpc/boot/serial.c: No such file or directory Why this is only happening with -j 1 is not clear, when building with -j greater than 1 somehow we decide to look for serial.c in the src tree (../), eg: gcc -I../arch/powerpc/boot -c -o arch/powerpc/boot/serial.o ../arch/powerpc/boot/serial.c Regardless we shouldn't be specifying a dependency on serial.c in the build tree, we want to add a dependency to the version in $(srctree) so fix the rule to say that. Fixes: 5e9dcb6 ("powerpc/boot: Expose Kconfig symbols to wrapper") Tested-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit 66ee620 ("idr: Permit any valid kernel pointer to be stored") changed the radix tree lookup so that it stops when reaching the bottom of the tree. However, the condition was added in the wrong place, making it possible to return retry entries to the caller. Reorder the tests to check for the retry entry before checking whether we're at the bottom of the tree. The retry entry should never be found in the tree root, so it's safe to defer the check until the end of the loop. Add a regression test to the test-suite to be sure this doesn't come back. Fixes: 66ee620 ("idr: Permit any valid kernel pointer to be stored") Reported-by: Greg Kurz <groug@kaod.org> Signed-off-by: Matthew Wilcox <willy@infradead.org>
These convenience wrappers match the other _irq and _bh wrappers we already have. It turns out I'd already open-coded xa_cmpxchg_irq() in the shmem code, so convert that. Signed-off-by: Matthew Wilcox <willy@infradead.org>
xa_mk_value() only handles values up to LONG_MAX. I successfully hid that inside xa_store_index() and xa_erase_index(), but it turned out I also needed it for testing xa_alloc() on 32-bit machines. So extract xa_mk_index() from the above two functions, and convert the non-constant users of xa_mk_value() to xa_mk_index(). Signed-off-by: Matthew Wilcox <willy@infradead.org>
There was no bug here, but there was no test coverage for this scenario. Signed-off-by: Matthew Wilcox <willy@infradead.org>
Now that there are different variants of pt_regs for userspace and kernel, the uapi for the BPF_PROG_TYPE_PERF_EVENT program type must be changed by exporting the user_pt_regs structure instead of the pt_regs structure that is in-kernel only. Fixes: 002af93 ("powerpc: Split user/kernel definitions of struct pt_regs") Signed-off-by: Sandipan Das <sandipan@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Making PAPR_SCM select LIBNVDIMM results in circular dependencies in Kconfig when another symbol depends on it. Fix this by replacing the select with a depends. Fixes: b5beae5 ("powerpc/pseries: Add driver for PAPR SCM regions") Reported-by: Alastair D'Silva <alastair@d-silva.org> Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Fix an off-by-one error in the memory resource range. This resource is used to determine the address range of the memory to be hot-plugged as ZONE_DEVICE memory. The current end address results in the kernel attempting to map an additional memblock and the hypervisor may reject the mapping resulting in the entire hot-plug failing. Fixes: b5beae5 ("powerpc/pseries: Add driver for PAPR SCM regions") Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Pin PH11 is used on various A83T board to detect a change in the OTG port's ID pin, as in when an OTG host cable is plugged in. The incorrect offset meant the gpiochip/irqchip was activating the wrong pin for interrupts. Fixes: 4730f33 ("pinctrl: sunxi: add allwinner A83T PIO controller support") Cc: <stable@vger.kernel.org> Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Some new variants require updated firmware. V2: add MODULE_FIRMWARE for new firmwares Reviewed-by: Huang Rui <ray.huang@amd.com> (v1) Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
The ibm,unit-sizes property was originally specified as an array of two u32s corresponding to the memory block size, and the number of blocks available in that region. A fairly last-minute change to the SCM DT specification was splitting that into two seperate u64 properties: ibm,block-sizes and ibm,number-of-blocks that convey the same information. No firmware / hypervisor that emitted the ibm,unit-size property ever appeared in the wild. Fixes: b5beae5 ("powerpc/pseries: Add driver for PAPR SCM regions") Signed-off-by: Oliver O'Halloran <oohall@gmail.com> [mpe: Use kernel types (u32/u64)] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The return values of a h-call are returned in the CPU registers and written to the provided buffer by the plpar_hcall() wrapper. As a result the values written to memory are always in the native endian and should not be byte swapped. The inital implementation of the H-Call interface was done in qemu and the returned values were byte swapped unnecessarily in both the hypervisor and in the driver so this was only noticed when bringing up the PowerVM implementation. Fixes: b5beae5 ("powerpc/pseries: Add driver for PAPR SCM regions") Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When a new nvdimm device is registered with libnvdimm via nvdimm_create() it is added as a device on the nvdimm bus. The probe function for the DIMM driver is potentially quite slow so actually registering and probing the device is done in an async domain rather than immediately after device creation. This can result in a race where the region device (created 2nd) is probed first and fails to activate at boot. To fix this we use the same approach as the ACPI/NFIT driver which is to check that all the DIMM devices registered successfully. LibNVDIMM provides the nvdimm_bus_count_dimms() function which synchronises with the async domain and verifies that the dimm was successfully registered with the bus. If either of these does not occur then we bail. Fixes: b5beae5 ("powerpc/pseries: Add driver for PAPR SCM regions") Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The interleave set cookie is used to determine if a label stored in the metadata space should be applied to the current region. This is important in the case of NVDIMMs since the firmware may change the interleaving configuration of a DIMM which would invalidate the existing labels. In our case the hypervisor hides those details from us so we don't really care, but libnvdimm still requires the interleave set cookie to be non-zero. For our purposes we just need the set cookie to be unique and fixed for a given PAPR SCM region and using the unit-guid (really a UUID) is fine for this purpose. Fixes: b5beae5 ("powerpc/pseries: Add driver for PAPR SCM regions") Signed-off-by: Oliver O'Halloran <oohall@gmail.com> [mpe: Use kernel types (u64)] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The "altmap" is used to provide a pool of memory that is reserved for the vmemmap backing of hot-plugged memory. This is useful when adding large amount of ZONE_DEVICE memory to a system with a limited amount of normal memory. On ppc64 we use huge pages to map the vmemmap which requires the backing storage to be contigious and aligned to the hugepage size. The altmap implementation allows for the altmap provider to reserve a few PFNs at the start of the range for it's own uses and when this occurs the first chunk of the altmap is not usable for hugepage mappings. On hash there is no sane way to fall back to a normal sized page mapping so we fail the allocation. This results in memory hotplug failing with ENOMEM when the new range doesn't fall into an existing vmemmap block. This patch handles this case by falling back to using system memory rather than failing if we cannot allocate from the altmap. This fallback should only ever be used for the first vmemmap block so it should not cause excess memory consumption. Fixes: 7b73d97 ("mm: pass the vmem_altmap to vmemmap_populate") Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Arch code should use tracehook_*() helpers, as documented in include/linux/tracehook.h, ptrace_report_syscall() is not expected to be used outside that file. The patch does not look very nice, but at least it is correct and opens the way for PTRACE_GET_SYSCALL_INFO API. Co-authored-by: Dmitry V. Levin <ldv@altlinux.org> Fixes: 5521eb4 ("powerpc/ptrace: Add support for PTRACE_SYSEMU") Signed-off-by: Elvira Khabirova <lineprinter@altlinux.org> Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> [mpe: Take this as a minimal fix for 4.20, we'll rework it later] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
New vega ids. Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
New vega ids. Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
New vega10 ids. Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
Since we found a problem with the 'copy-from' operation after objects have been truncated, offloading object copies to OSDs should be discouraged until the issue is fixed. Thus, this patch adds the 'nocopyfrom' mount option to the default mount options which effectily means that remote copies won't be done in copy_file_range unless they are explicitly enabled at mount time. [ Adjust ceph_show_options() accordingly. ] Link: https://tracker.ceph.com/issues/37378 Signed-off-by: Luis Henriques <lhenriques@suse.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Should hopefully fix a regression some people have been seeing since EVO push buffers were moved to VRAM by default on Pascal GPUs. Fixes: d00ddd9 ("drm/nouveau/kms/nv50-: allocate push buffers in vidmem on pascal") Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: <stable@vger.kernel.org> # 4.19+
Noticed this while working on redoing the reference counting scheme in the DP MST helpers. Nouveau doesn't attempt to call drm_dp_mst_topology_mgr_destroy() at all, which leaves it leaking all of the resources for drm_dp_mst_topology_mgr and it's children mstbs+ports. Fixes: f479c0b ("drm/nouveau/kms/nv50: initial support for DP 1.2 multi-stream") Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: <stable@vger.kernel.org> # v4.10+ Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Braswell is really picky about having our writes posted to memory before we execute or else the GPU may see stale values. A wmb() is insufficient as it only ensures the writes are visible to other cores, we need a full mb() to ensure the writes are in memory and visible to the GPU. The most frequent failure in flushing before execution is that we see stale PTE values and execute the wrong pages. References: 987abd5 ("drm/i915/execlists: Force write serialisation into context image vs execution") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: stable@vger.kernel.org Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181206084431.9805-3-chris@chris-wilson.co.uk (cherry picked from commit 490b8c6) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Currently we allocate a scratch page for each engine, but since we only ever write into it for post-sync operations, it is not exposed to userspace nor do we care for coherency. As we then do not care about its contents, we can use one page for all, reducing our allocations and avoid complications by not assuming per-engine isolation. For later use, it simplifies engine initialisation (by removing the allocation that required struct_mutex!) and means that we can always rely on there being a scratch page. v2: Check that we allocated a large enough scratch for I830 w/a Fixes: 06e562e ("drm/i915/ringbuffer: Delay after EMIT_INVALIDATE for gen4/gen5") # v4.18.20 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108850 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181204141522.13640-1-chris@chris-wilson.co.uk Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: <stable@vger.kernel.org> # v4.18.20+ (cherry picked from commit 5179749) [Joonas: Use new function in gen9_init_indirectctx_bb too] Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Adding an extra MI_STORE_DWORD_IMM to the gpu relocation path for gen3 was good, but still not good enough. To survive 24+ hours under test we needed to perform not one, not two but three extra store-dw. Doing so for each GPU relocation was a little unsightly and since we need to worry about userspace hitting the same issues, we should apply the dummy store-dw into the EMIT_FLUSH. Fixes: 7dd4f67 ("drm/i915: Async GPU relocation processing") References: 7fa28e1 ("drm/i915: Write GPU relocs harder with gen3") Testcase: igt/gem_tiled_fence_blits # blb/pnv Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181207134037.11848-1-chris@chris-wilson.co.uk (cherry picked from commit a889580) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The return statement is redundant as there is a return statement
immediately before it so we have dead code that can be removed.
Also remove the unused declaration of ret.
Detected by CoverityScan, CID#1473793 ("Structurally dead code")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Since this is not needed any more on the latest SMC firmware. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
…rg/drm/drm-intel into drm-fixes - Fix for system crash after GPU hang (Bugzilla #107945) - GVT fix for guest graphics corruption (intel/gvt-linux#61) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181207104352.GA18214@jlahtine-desk.ger.corp.intel.com
….org/drm/drm-intel into drm-fixes - Two fixes to avoid GPU hangs (on Braswell and Gen3) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181212134010.GA18900@jlahtine-desk.ger.corp.intel.com
…g/drm/drm-misc into drm-fixes - rockchip: Revert change causing WARN on shutdown (Brian) Cc: Brian Norris <briannorris@chromium.org> Signed-off-by: Dave Airlie <airlied@redhat.com> From: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20181212204309.GA150523@art_vandelay
…linux into drm-fixes Fixes for 4.20: - Stability fixes for new polaris variants (e.g., RX590) - New vega pci ids - Vega20 smu fix - Ctx locking fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181212203022.3054-1-alexander.deucher@amd.com
…fixes Three fixes: tegra regression fix display flushing fix mst cleanup fix. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Ben Skeggs <skeggsb@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CACAvsv7WCPzjQZonk+eS1FgEUKirz-4LOrVpMUVMM=D-GjbVpg@mail.gmail.com
lkml and Linus gained a CoC, and it's serious this time. Which means my no 1 reason for declining to officially step up as drm maintainer is gone, and I didn't find any new good excuse. I chatted with a few people in private already, and the biggest concern is that I mislay my community hat and start running around with my intel hat only. Or some other convenient abuse of trust. That's why this patch doesn't just need a lot of acks that mean "yeah seems fine to me", but a lot of acks that mean "yeah we'll tell you when you're over the line and usurp you from that comfy chair if you don't get it". Which I think we've been done a fairly good job here at dri-devel in general, but better to be clear. Rough idea is that I'll do this for maybe 2-3 years, helping Dave figure out a group model for drm overall. And getting the tooling and infrastructure for that off the ground. Then step down again because some other shiny thing that needs chasing. Of course as plans tend to do, this one will probably pan out a bit different in reality. Cc: David Airlie <airlied@linux.ie> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Eric Anholt <eric@anholt.net> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Daniel Stone <daniels@collabora.com> Signed-off-by: Daniel Vetter <daniel@ffwll.ch> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com> Acked-by: Sean Paul <sean@poorly.run> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181210103001.30549-1-daniel.vetter@ffwll.ch
…iatek/linux.git-tags into drm-fixes Single bridge attachment fix. Signed-off-by: Dave Airlie <airlied@redhat.com> From: CK Hu <ck.hu@mediatek.com> Link: https://patchwork.freedesktop.org/patch/msgid/1544407975.18825.3.camel@mtksdaap41
With the new validation code, a malicious user-space app could potentially submit command streams with enough buffer-object and resource references in them to have the resulting allocated validion nodes and relocations make the kernel run out of GFP_KERNEL memory. Protect from this by having the validation code reserve TTM graphics memory when allocating. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Deepak Rawat <drawat@vmware.com> --- v2: Removed leftover debug printouts
Specifying a starting ID greater than the maximum ID isn't something attempted very often, but it should fail. It was succeeding due to xas_find_marked() returning the wrong error state, so add tests for both xa_alloc() and xas_find_marked(). Fixes: b803b42 ("xarray: Add XArray iterators") Signed-off-by: Matthew Wilcox <willy@infradead.org>
…mash/linux into drm-fixes One regression fix for avoiding kernel OOM, one cleanup return fix. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Hellstrom <thellstrom@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181213122815.10581-1-thellstrom@vmware.com
…nux-dax Pull XArray fixes from Matthew Wilcox: "Two bugfixes, each with test-suite updates, two improvements to the test-suite without associated bugs, and one patch adding a missing API" * tag 'xarray-4.20-rc7' of git://git.infradead.org/users/willy/linux-dax: XArray: Fix xa_alloc when id exceeds max XArray tests: Check iterating over multiorder entries XArray tests: Handle larger indices more elegantly XArray: Add xa_cmpxchg_irq and xa_cmpxchg_bh radix tree: Don't return retry entries from lookup
…/drm
Pull drm fixes from Dave Airlie:
"While I hoped things would calm down, the world hasn't joined with me,
but it's a few things scattered over a wide area. The i915 workarounds
regression fix is probably the largest, the rest are more usual sized.
We also get some new AMD PCI IDs.
There is also a patch in here to MAINTAINERS to added Daniel as an
official DRM toplevel co-maintainer, he's decided he wants to step up
and share the glory, and he'll likely process next weeks fixes while
I'm away on holidays.
Summary:
amdgpu:
- some new PCI IDs
- fixed firmware image updates
- power management fixes
- locking warning fix
nouveau:
- framebuffer flushing fix
- memory leak fix
- tegra device init regression fix
vmwgfx:
- OOM kernel memory fix
- excess return in function fix
i915:
- the biggest fix is a regression fix where workarounds weren't
getting reapplied after a gpu hang causing further crashing, this
fixes the workaround application to make it happen again
- GPU hang fixes for Braswell and some GEN3 GPUs
- GVT fix for broadwell tiling
rockchip:
- revert to fix a regression causing a WARN on shutdown
mediatek:
- avoid crash attaching to non-existant bridges"
* tag 'drm-fixes-2018-12-14' of git://anongit.freedesktop.org/drm/drm: (23 commits)
drm/vmwgfx: Protect from excessive execbuf kernel memory allocations v3
MAINTAINERS: Daniel for drm co-maintainer
drm/amdgpu: drop fclk/gfxclk ratio setting
drm/vmwgfx: remove redundant return ret statement
drm/i915: Flush GPU relocs harder for gen3
drm/i915: Allocate a common scratch page
drm/i915/execlists: Apply a full mb before execution for Braswell
drm/nouveau/kms: Fix memory leak in nv50_mstm_del()
drm/nouveau/kms/nv50-: also flush fb writes when rewinding push buffer
drm/amdgpu: Fix DEBUG_LOCKS_WARN_ON(depth <= 0) in amdgpu_ctx.lock
Revert "drm/rockchip: Allow driver to be shutdown on reboot/kexec"
drm/nouveau/drm/nouveau: tegra: Call nouveau_drm_device_init()
drm/amdgpu/powerplay: Apply avfs cks-off voltages on VI
drm/amdgpu: update SMC firmware image for polaris10 variants
drm/amdkfd: add new vega20 pci id
drm/amdkfd: add new vega10 pci ids
drm/amdgpu: add some additional vega20 pci ids
drm/amdgpu: add some additional vega10 pci ids
drm/amdgpu: update smu firmware images for VI variants (v2)
drm/i915: Introduce per-engine workarounds
...
…nel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "Three pin control fixes for the v4.20 series. Just odd drivers, so nothing particularly interesting: - Set the tile property on Qualcomm SDM60. - Fix up enable register calculation for the Meson - Fix an IRQ offset on the Sunxi (Allwinner)" * tag 'pinctrl-v4.20-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: sunxi: a83t: Fix IRQ offset typo for PH11 pinctrl: meson: fix pull enable register calculation pinctrl: sdm660: Set tile property for pingroups
Pull ceph fix from Ilya Dryomov: "Luis discovered a problem with the new copyfrom offload on the server side. Disable it for now" * tag 'ceph-for-4.20-rc7' of https://github.com/ceph/ceph-client: ceph: make 'nocopyfrom' a default mount option
…el/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "One notable fix for our change to split pt_regs between user/kernel, we forgot to update BPF to use the user-visible type which was an ABI break for BPF programs. A slightly ugly but minimal fix to do_syscall_trace_enter() so that we use tracehook_report_syscall_entry() properly. We'll rework the code in next to avoid the empty if body. Seven commits fixing bugs in the new papr_scm (Storage Class Memory) driver. The driver was finally able to be tested on the other hypervisor which exposed several bugs. The fixes are all fairly minimal at least. Fix a crash in our MSI code if an MSI-capable device is plugged into a non-MSI capable PHB, only seen on older hardware (MPC8378). Fix our legacy serial code to look for "stdout-path" since the device trees were updated to use that instead of "linux,stdout-path". A change to the COFF zImage code to fix booting old powermacs. A couple of minor build fixes. Thanks to: Benjamin Herrenschmidt, Daniel Axtens, Dmitry V. Levin, Elvira Khabirova, Oliver O'Halloran, Paul Mackerras, Radu Rendec, Rob Herring, Sandipan Das" * tag 'powerpc-4.20-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/ptrace: replace ptrace_report_syscall() with a tracehook call powerpc/mm: Fallback to RAM if the altmap is unusable powerpc/papr_scm: Use ibm,unit-guid as the iset cookie powerpc/papr_scm: Fix DIMM device registration race powerpc/papr_scm: Remove endian conversions powerpc/papr_scm: Update DT properties powerpc/papr_scm: Fix resource end address powerpc/papr_scm: Use depend instead of select powerpc/bpf: Fix broken uapi for BPF_PROG_TYPE_PERF_EVENT powerpc/boot: Fix build failures with -j 1 powerpc: Look for "stdout-path" when setting up legacy consoles powerpc/msi: Fix NULL pointer access in teardown code powerpc/mm: Fix linux page tables build with some configs powerpc: Fix COFF zImage booting on old powermacs
…git/arm64/linux Pull arm64 fix from Catalin Marinas: "Invalidate the caches before clearing the DMA buffer via the non-cacheable alias in the FORCE_CONTIGUOUS case" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: dma-mapping: Fix FORCE_CONTIGUOUS buffer clearing
pull bot
pushed a commit
that referenced
this pull request
Mar 6, 2019
KASAN does not play well with the page poisoning (CONFIG_PAGE_POISONING). It triggers false positives in the allocation path: BUG: KASAN: use-after-free in memchr_inv+0x2ea/0x330 Read of size 8 at addr ffff88881f800000 by task swapper/0 CPU: 0 PID: 0 Comm: swapper Not tainted 5.0.0-rc1+ #54 Call Trace: dump_stack+0xe0/0x19a print_address_description.cold.2+0x9/0x28b kasan_report.cold.3+0x7a/0xb5 __asan_report_load8_noabort+0x19/0x20 memchr_inv+0x2ea/0x330 kernel_poison_pages+0x103/0x3d5 get_page_from_freelist+0x15e7/0x4d90 because KASAN has not yet unpoisoned the shadow page for allocation before it checks memchr_inv() but only found a stale poison pattern. Also, false positives in free path, BUG: KASAN: slab-out-of-bounds in kernel_poison_pages+0x29e/0x3d5 Write of size 4096 at addr ffff8888112cc000 by task swapper/0/1 CPU: 5 PID: 1 Comm: swapper/0 Not tainted 5.0.0-rc1+ #55 Call Trace: dump_stack+0xe0/0x19a print_address_description.cold.2+0x9/0x28b kasan_report.cold.3+0x7a/0xb5 check_memory_region+0x22d/0x250 memset+0x28/0x40 kernel_poison_pages+0x29e/0x3d5 __free_pages_ok+0x75f/0x13e0 due to KASAN adds poisoned redzones around slab objects, but the page poisoning needs to poison the whole page. Link: http://lkml.kernel.org/r/20190114233405.67843-1-cai@lca.pw Signed-off-by: Qian Cai <cai@lca.pw> Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
pull bot
pushed a commit
that referenced
this pull request
Sep 4, 2020
When an SMC connection is created, and there is a problem to create an RMB or DMB, the previously created send buffer is thrown away as well including buffer descriptor freeing. Make sure the connection no longer references the freed buffer descriptor, otherwise bugs like this are possible: [71556.835148] ============================================================================= [71556.835168] BUG kmalloc-128 (Tainted: G B OE ): Poison overwritten [71556.835172] ----------------------------------------------------------------------------- [71556.835179] INFO: 0x00000000d20894be-0x00000000aaef63e9 @offset=2724. First byte 0x0 instead of 0x6b [71556.835215] INFO: Allocated in __smc_buf_create+0x184/0x578 [smc] age=0 cpu=5 pid=46726 [71556.835234] ___slab_alloc+0x5a4/0x690 [71556.835239] __slab_alloc.constprop.0+0x70/0xb0 [71556.835243] kmem_cache_alloc_trace+0x38e/0x3f8 [71556.835250] __smc_buf_create+0x184/0x578 [smc] [71556.835257] smc_buf_create+0x2e/0xe8 [smc] [71556.835264] smc_listen_work+0x516/0x6a0 [smc] [71556.835275] process_one_work+0x280/0x478 [71556.835280] worker_thread+0x66/0x368 [71556.835287] kthread+0x17a/0x1a0 [71556.835294] ret_from_fork+0x28/0x2c [71556.835301] INFO: Freed in smc_buf_create+0xd8/0xe8 [smc] age=0 cpu=5 pid=46726 [71556.835307] __slab_free+0x246/0x560 [71556.835311] kfree+0x398/0x3f8 [71556.835318] smc_buf_create+0xd8/0xe8 [smc] [71556.835324] smc_listen_work+0x516/0x6a0 [smc] [71556.835328] process_one_work+0x280/0x478 [71556.835332] worker_thread+0x66/0x368 [71556.835337] kthread+0x17a/0x1a0 [71556.835344] ret_from_fork+0x28/0x2c [71556.835348] INFO: Slab 0x00000000a0744551 objects=51 used=51 fp=0x0000000000000000 flags=0x1ffff00000010200 [71556.835352] INFO: Object 0x00000000563480a1 @offset=2688 fp=0x00000000289567b2 [71556.835359] Redzone 000000006783cde2: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ [71556.835363] Redzone 00000000e35b876e: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ [71556.835367] Redzone 0000000023074562: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ [71556.835372] Redzone 00000000b9564b8c: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ [71556.835376] Redzone 00000000810c6362: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ [71556.835380] Redzone 0000000065ef52c3: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ [71556.835384] Redzone 00000000c5dd6984: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ [71556.835388] Redzone 000000004c480f8f: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ [71556.835392] Object 00000000563480a1: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk [71556.835397] Object 000000009c479d06: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk [71556.835401] Object 000000006e1dce92: 6b 6b 6b 6b 00 00 00 00 6b 6b 6b 6b 6b 6b 6b 6b kkkk....kkkkkkkk [71556.835405] Object 00000000227f7cf8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk [71556.835410] Object 000000009a701215: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk [71556.835414] Object 000000003731ce76: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk [71556.835418] Object 00000000f7085967: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk [71556.835422] Object 0000000007f99927: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 kkkkkkkkkkkkkkk. [71556.835427] Redzone 00000000579c4913: bb bb bb bb bb bb bb bb ........ [71556.835431] Padding 00000000305aef82: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ [71556.835435] Padding 00000000b1cdd722: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ [71556.835438] Padding 00000000c7568199: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ [71556.835442] Padding 00000000fad4c4d4: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ [71556.835451] CPU: 0 PID: 47939 Comm: kworker/0:15 Tainted: G B OE 5.9.0-rc1uschi+ #54 [71556.835456] Hardware name: IBM 3906 M03 703 (LPAR) [71556.835464] Workqueue: events smc_listen_work [smc] [71556.835470] Call Trace: [71556.835478] [<00000000d5eaeb10>] show_stack+0x90/0xf8 [71556.835493] [<00000000d66fc0f8>] dump_stack+0xa8/0xe8 [71556.835499] [<00000000d61a511c>] check_bytes_and_report+0x104/0x130 [71556.835504] [<00000000d61a57b2>] check_object+0x26a/0x2e0 [71556.835509] [<00000000d61a59bc>] alloc_debug_processing+0x194/0x238 [71556.835514] [<00000000d61a8c14>] ___slab_alloc+0x5a4/0x690 [71556.835519] [<00000000d61a9170>] __slab_alloc.constprop.0+0x70/0xb0 [71556.835524] [<00000000d61aaf66>] kmem_cache_alloc_trace+0x38e/0x3f8 [71556.835530] [<000003ff80549bbc>] __smc_buf_create+0x184/0x578 [smc] [71556.835538] [<000003ff8054a396>] smc_buf_create+0x2e/0xe8 [smc] [71556.835545] [<000003ff80540c16>] smc_listen_work+0x516/0x6a0 [smc] [71556.835549] [<00000000d5f0f448>] process_one_work+0x280/0x478 [71556.835554] [<00000000d5f0f6a6>] worker_thread+0x66/0x368 [71556.835559] [<00000000d5f18692>] kthread+0x17a/0x1a0 [71556.835563] [<00000000d6abf3b8>] ret_from_fork+0x28/0x2c [71556.835569] INFO: lockdep is turned off. [71556.835573] FIX kmalloc-128: Restoring 0x00000000d20894be-0x00000000aaef63e9=0x6b [71556.835577] FIX kmalloc-128: Marking all objects used Fixes: fd7f3a7 ("net/smc: remove freed buffer from list") Reviewed-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
pull bot
pushed a commit
that referenced
this pull request
Apr 27, 2021
… the next line
Fix checkpatch errors:
ERROR: open brace '{' following function definitions go on the next line
#54: FILE: spi-bitbang.c:54:
ERROR: open brace '{' following function definitions go on the next line
#82: FILE: spi-bitbang.c:82:
ERROR: open brace '{' following function definitions go on the next line
#110: FILE: spi-bitbang.c:110:
Signed-off-by: Jay Fang <f.fangjian@huawei.com>
Link: https://lore.kernel.org/r/1616566602-13894-8-git-send-email-f.fangjian@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
pull bot
pushed a commit
that referenced
this pull request
May 15, 2021
The new ana_log_size should be used instead of the old one. Or kernel NULL pointer dereference will happen like below: [ 38.957849][ T69] BUG: kernel NULL pointer dereference, address: 000000000000003c [ 38.975550][ T69] #PF: supervisor write access in kernel mode [ 38.975955][ T69] #PF: error_code(0x0002) - not-present page [ 38.976905][ T69] PGD 0 P4D 0 [ 38.979388][ T69] Oops: 0002 [#1] SMP NOPTI [ 38.980488][ T69] CPU: 0 PID: 69 Comm: kworker/0:2 Not tainted 5.12.0+ #54 [ 38.981254][ T69] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 38.982502][ T69] Workqueue: events nvme_loop_execute_work [ 38.985219][ T69] RIP: 0010:memcpy_orig+0x68/0x10f [ 38.986203][ T69] Code: 83 c2 20 eb 44 48 01 d6 48 01 d7 48 83 ea 20 0f 1f 00 48 83 ea 20 4c 8b 46 f8 4c 8b 4e f0 4c 8b 56 e8 4c 8b 5e e0 48 8d 76 e0 <4c> 89 47 f8 4c 89 4f f0 4c 89 57 e8 4c 89 5f e0 48 8d 7f e0 73 d2 [ 38.987677][ T69] RSP: 0018:ffffc900001b7d48 EFLAGS: 00000287 [ 38.987996][ T69] RAX: 0000000000000020 RBX: 0000000000000024 RCX: 0000000000000010 [ 38.988327][ T69] RDX: ffffffffffffffe4 RSI: ffff8881084bc004 RDI: 0000000000000044 [ 38.988620][ T69] RBP: 0000000000000024 R08: 0000000100000000 R09: 0000000000000000 [ 38.988991][ T69] R10: 0000000100000000 R11: 0000000000000001 R12: 0000000000000024 [ 38.989289][ T69] R13: ffff8881084bc000 R14: 0000000000000000 R15: 0000000000000024 [ 38.989845][ T69] FS: 0000000000000000(0000) GS:ffff888237c00000(0000) knlGS:0000000000000000 [ 38.990234][ T69] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 38.990490][ T69] CR2: 000000000000003c CR3: 00000001085b2000 CR4: 00000000000006f0 [ 38.991105][ T69] Call Trace: [ 38.994157][ T69] sg_copy_buffer+0xb8/0xf0 [ 38.995357][ T69] nvmet_copy_to_sgl+0x48/0x6d [ 38.995565][ T69] nvmet_execute_get_log_page_ana+0xd4/0x1cb [ 38.995792][ T69] nvmet_execute_get_log_page+0xc9/0x146 [ 38.995992][ T69] nvme_loop_execute_work+0x3e/0x44 [ 38.996181][ T69] process_one_work+0x1c3/0x3c0 [ 38.996393][ T69] worker_thread+0x44/0x3d0 [ 38.996600][ T69] ? cancel_delayed_work+0x90/0x90 [ 38.996804][ T69] kthread+0xf7/0x130 [ 38.996961][ T69] ? kthread_create_worker_on_cpu+0x70/0x70 [ 38.997171][ T69] ret_from_fork+0x22/0x30 [ 38.997705][ T69] Modules linked in: [ 38.998741][ T69] CR2: 000000000000003c [ 39.000104][ T69] ---[ end trace e719927b609d0fa0 ]--- Fixes: 5e1f689 ("nvme-multipath: fix double initialization of ANA state") Signed-off-by: Hou Pu <houpu.main@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
See Commits and Changes for more details.
Created by
pull[bot]