[pull] master from torvalds:master #50
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
![pull[bot]](https://avatars.githubusercontent.com/in/12910?s=60&v=4){kind=small}
Since commit d7c5f68 ("ARM: dts: sun8i: a83t: bananapi-m3: Add AXP813 regulator nodes") my BPIM3 no longer works at gigabit speed. With the default setting, dldo3 is regulated at 2.9v which seems sufficient for the PHY but the aforementioned commit drops it to 2.5V which is insufficient. Note that this behaviour is random for all BPIM3. Some work with 2.5V, but some don't. Finnaly, someone from Bananapi confirmed that this regulator must be set to 3.3V. Fixes: d7c5f68 ("ARM: dts: sun8i: a83t: bananapi-m3: Add AXP813 regulator nodes") Signed-off-by: Corentin Labbe <clabbe@baylibre.com> [wens@csie.org: Reworked commit message] Signed-off-by: Chen-Yu Tsai <wens@csie.org>
No default serial console on boot. Fix this by using a 'stdout-path' property that points to the device. Fixes: c0d9f9a ("arm64: dts: mt7622: add earlycon to mt7622-rfb1 board") Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Tested-by: Kevin Hilman <khilman@baylibre.com> [mb: Fix commit message] Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Fix this by using a 'stdout-path' property that points to the device. Fixes: 0b6286d ("arm64: dts: mt7622: add bananapi BPI-R64 board") Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
MediaTeks general purpose timer register into system in early phase during kernel boot, but the clock sources aren't probed at this point. The system has the ARM architecture timer, so we don't need the GPT timer from mediatek. Drop the DT node for it. Fixes: 9cc7f0d ("arm64: dts: mt7622: add timer, CCI-400 and PMU nodes") Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> [mb: fix commit message] Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
…quirk The 258a:6a88 keyboard-dock shipped with the Prowise PT301 tablet is likely another ITE based design. The controller die is directly bonded to the PCB with a blob of black glue on top so there are no markings and the 258a vendor-id used is unknown anywhere. But the keyboard has the exact same hotkeys mapped to Fn+F1 - F10 as the other ITE8595 keyboard I have *and* it has the same quirky behavior wrt the rfkill hotkey. Either way as said this keyboard has the same quirk for its rfkill / airplane mode hotkey as the ITE 8595 chip, it only sends a single release event when pressed and released, it never sends a press event. This commit adds the 258a:6a88 USB id to the hid-ite id-table, fixing the rfkill key not working on this keyboard. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
The commit b1b8f45 ("ARM: dts: bcm2837: Add missing GPIOs of Expander") introduced a wifi power sequence. Unfortunately the polarity of the reset GPIOs were wrong and broke the wifi support on Raspberry Pi 3 B and later in 3 B+. This wasn't discovered before since the power sequence takes only effect in case the relevant MMC driver is compiled as a module. Fixes: b1b8f45 ("ARM: dts: bcm2837: Add missing GPIOs of Expander") Cc: stable@vger.kernel.org Reported-by: Matthias Lueschner <lueschem@gmail.com> Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=911443 Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Add IRC channel and URL of the wiki. Also add soc drivers folder and regex to catch more mediatek components. Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>
…kernel/git/matthias.bgg/linux into fixes DT mt7622: - Kernelci awaits a working stdout-path. Fix the path for reference board and bananapi-r64 - General propouse timer has issues with clocks that didn't get probed early. Delete the DT node as the timer isn't need, a ARM arch timer exists on the system. * tag 'v4.19-next-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: arm64: dts: mt7622: Drop the general purpose timer node arm64: dts: mt7622: fix no more console output on BPI-R64 board arm64: dts: mt7622: fix no more console output on rfb1 Signed-off-by: Olof Johansson <olof@lixom.net>
cpu_is_mmp2() was equivalent to cpu_is_pj4(), wouldn't be correct for multiplatform kernels. Fix it by also considering mmp_chip_id, as is done for cpu_is_pxa168() and cpu_is_pxa910() above. Moreover, it is only available with CONFIG_CPU_MMP2 and thus doesn't work on DT-based MMP2 machines. Enable it on CONFIG_MACH_MMP2_DT too. Note: CONFIG_CPU_MMP2 is only used for machines that use board files instead of DT. It should perhaps be renamed. I'm not doing it now, because I don't have a better idea. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: stable@vger.kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
Move Eric Miao and Haojian Zhuang over to CREDITS, since they're AWOL for some time already. The git trees have gone away too. I'm adding myself as a reviewer. I'd like to be Cc'd on patches and will be able to test them, but I don't possess a data sheet thus there might be things I'll be unable to review. Hence the Odd-Fixes status. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Olof Johansson <olof@lixom.net>
There's a bug in dtc in checking for duplicate node names when there's
another section (e.g. "/ { };"). In this case, skeleton.dtsi provides
another section. Upon removal of skeleton.dtsi, the dtb fails to build
due to a duplicate node 'fixedregulator@0'. As both nodes were pretty
much the same 3.3V fixed regulator, it hasn't really mattered. Fix this
by renaming the nodes to something unique. In the process, drop the
unit-address which shouldn't be present wtihout reg property.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
…roadcom/stblinux into fixes This pull request contains Broadcom ARM-based SoCs Device Tree fixes, please pull the following for 4.20: - Stefan fixes the polariy of the Wi-Fi reset GPIOs signals which would break on Raspberry Pi 3B and 3B+ * tag 'arm-soc/for-4.20/devicetree-fixes' of https://github.com/Broadcom/stblinux: ARM: dts: bcm2837: Fix polarity of wifi reset GPIOs Signed-off-by: Olof Johansson <olof@lixom.net>
The Wifi chip should be clocked by a 32kHz clock coming from i.MX7D CLKO2 output pin, so describe the pinmux and clock hierarchy in the device tree to allow the Wifi chip to be properly clocked. Managed to successfully test Wifi with such change. Used the standard nvram.txt file provided by TechNexion, which selects an external 32kHz clock for the Wifi chip by default. Fixes: 99a5245 ("ARM: dts: imx7d-pico: Add Wifi support") Suggested-by: Arend van Spriel <arend.vanspriel@broadcom.com> Tested-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
…da 7K/8K" This reverts commit 8ed4636. This commit breaks boot on Armada 8K based systems. Reverting it makes affected systems boot again. Reported-by: Sergey Matyukevich <geomatsi@gmail.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
The sw2iso count should cover ARM LDO ramp-up time, the MAX ARM LDO ramp-up time may be up to more than 100us on some boards, this patch sets sw2iso to 0xf (~384us) which is the reset value, and it is much more safe to cover different boards, since we have observed that some customer boards failed with current setting of 0x2. Fixes: 05136f0 ("ARM: imx: support arm power off in cpuidle for i.mx6sx") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
According to bindings/regulator/fixed-regulator.txt the 'clocks' and 'clock-names' properties are not valid ones. In order to turn on the Wifi clock the correct location for describing the CLKO2 clock is via a mmc-pwrseq handle, so do it accordingly. Fixes: 5635495 ("ARM: dts: imx: add Boundary Devices Nitrogen7 board") Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
SNES RetroPort and RetroPad register only 4 gamepad buttons when they should register all 8 buttons. This is described here: https://ask.fedoraproject.org/en/question/128102 This is happening because of: Commit 190d7f0 ("HID: input: do not increment usages when duplicate is found") Here, I add the quirk HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE (created for backward compatibility with the change in 190d7f0) for the two products. Tested with both RetroPort and RetroPad. Cc: stable@vger.kernel.org # v4.18+ Signed-off-by: Nic Soudée <nsoudee@gmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
ABS_RESERVED was added in d9ca1c9 and accidentally removed as part of ffe0e7c when the high-resolution scrolling code was removed. Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Reviewed-by: Martin Kepplinger <martin.kepplinger@ginzinger.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
…rnel/git/shawnguo/linux into fixes i.MX fixes for 4.20, round 3: - A couple of fixes on imx7d-pico and imx7d-nitrogen7 boards to correct the description of the Wifi clock. - Change SW2ISO count to get a safer ARM LDO ramp-up time, so that different boards can be covered. This fixes the ARM LDO failure seen on some customer boards. * tag 'imx-fixes-4.20-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx7d-nitrogen7: Fix the description of the Wifi clock ARM: imx: update the cpu power up timing setting on i.mx6sx ARM: dts: imx7d-pico: Describe the Wifi clock Signed-off-by: Olof Johansson <olof@lixom.net>
…nux/kernel/git/sunxi/linux into fixes Allwinner fixes for 4.20 One small fix for a regulator range on the Banana Pi M3 * tag 'sunxi-fixes-for-4.20' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun8i: a83t: bananapi-m3: increase vcc-pd voltage to 3.3V Signed-off-by: Olof Johansson <olof@lixom.net>
… into fixes mvebu fixes for 4.20 Adding CPU Idle state in the device tree for Armada 8040 seems to breaks boot on some board, so let's revert it waiting for a better solution. * tag 'mvebu-fixes-4.20-1' of git://git.infradead.org/linux-mvebu: Revert "arm64: dts: marvell: add CPU Idle power state support on Armada 7K/8K" Signed-off-by: Olof Johansson <olof@lixom.net>
Commit '88ba95bedb79 ("backlight: pwm_bl: Compute brightness of LED
linearly to human eye")' allows the possibility to compute a default
brightness table when there isn't the brightness-levels property in the
DT. Unfortunately the changes made broke the pwm backlight for the
non-DT boards.
Usually, the non-DT boards don't pass the brightness levels via platform
data, instead, it sets the max_brightness in their platform data and the
driver calculates the level without a table. The offending patch assumed
that when there is no brightness levels table we should create one, but this
is clearly wrong for the non-DT case.
After this patch the code handles the DT and the non-DT case taking in
consideration also if max_brightness is set or not.
Fixes: 88ba95b ("backlight: pwm_bl: Compute brightness of LED linearly to human eye")
Reported-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
…/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"The usual batch; most of them are DT tweaks to fix misdescribed
hardware. Beyond that:
- A bugfix for MMP2 CPU detection, it's been there quite a while but
makes sense to fix now anyway.
- Some power management tweaks:
+ disabling of CPU idle power state on Marvell Armada 7K/8K
(Macchiatobin et al)
+ Increase of minimum voltage on BananaPi M3
+ Tweak of power ramp time for DVFS on NXP/Freescale i.MX7SX
- A couple of MAINTAINER updates:
+ MMP has a new volunteer to look after it
+ Mediatek adds a few keywords, IRC channel and wiki URL"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: dts: imx7d-nitrogen7: Fix the description of the Wifi clock
ARM: imx: update the cpu power up timing setting on i.mx6sx
Revert "arm64: dts: marvell: add CPU Idle power state support on Armada 7K/8K"
ARM: dts: imx7d-pico: Describe the Wifi clock
ARM: dts: realview: Fix some more duplicate regulator nodes
MAINTAINERS: update entry for MMP platform
ARM: mmp/mmp2: fix cpu_is_mmp2() on mmp2-dt
MAINTAINERS: mediatek: Update SoC entry
ARM: dts: bcm2837: Fix polarity of wifi reset GPIOs
arm64: dts: mt7622: Drop the general purpose timer node
arm64: dts: mt7622: fix no more console output on BPI-R64 board
arm64: dts: mt7622: fix no more console output on rfb1
ARM: dts: sun8i: a83t: bananapi-m3: increase vcc-pd voltage to 3.3V
…x/kernel/git/lee/backlight Pull backlight fix from Lee Jones: "Fix brightness levels when !DT in pwm_bl driver" * tag 'backlight-fixes-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: backlight: pwm_bl: Fix brightness levels for non-DT case.
…/git/hid/hid Pull HID subsystem fixes from Jiri Kosina: - two device-specific quirks from Hans de Goede and Nic Soudée - reintroduction of (mistakenly remocved) ABS_RESERVED from Peter Hutterer * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: Input: restore EV_ABS ABS_RESERVED HID: quirks: fix RetroUSB.com devices HID: ite: Add USB id match for another ITE based keyboard rfkill key quirk
pull bot
pushed a commit
that referenced
this pull request
Mar 2, 2019
scsi_device_quiesce() and scsi_device_resume() are called during system-wide suspend and resume. scsi_device_quiesce() only succeeds for SCSI devices that are in one of the RUNNING, OFFLINE or TRANSPORT_OFFLINE states (see also scsi_set_device_state()). This patch avoids that the following warning is triggered when resuming a system for which quiescing a SCSI device failed: WARNING: CPU: 2 PID: 11303 at drivers/scsi/scsi_lib.c:2600 scsi_device_resume+0x4f/0x58 CPU: 2 PID: 11303 Comm: kworker/u8:70 Not tainted 5.0.0-rc1+ #50 Hardware name: LENOVO 80E3/Lancer 5B2, BIOS A2CN45WW(V2.13) 08/04/2016 Workqueue: events_unbound async_run_entry_fn Call Trace: scsi_dev_type_resume+0x2e/0x60 async_run_entry_fn+0x32/0xd8 process_one_work+0x1f4/0x420 worker_thread+0x28/0x3c0 kthread+0x118/0x130 ret_from_fork+0x22/0x40 Cc: Przemek Socha <soprwa@gmail.com> Reported-by: Przemek Socha <soprwa@gmail.com> Fixes: 3a0a529 ("block, scsi: Make SCSI quiesce and resume work reliably") # v4.15 Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
pull bot
pushed a commit
that referenced
this pull request
Jan 16, 2021
…tirq Commit 39d42fa ("dm crypt: add flags to optionally bypass kcryptd workqueues") made it possible for some code paths in dm-crypt to be executed in softirq context, when the underlying driver processes IO requests in interrupt/softirq context. When Crypto API backlogs a crypto request, dm-crypt uses wait_for_completion to avoid sending further requests to an already overloaded crypto driver. However, if the code is executing in softirq context, we might get the following stacktrace: [ 210.235213][ C0] BUG: scheduling while atomic: fio/2602/0x00000102 [ 210.236701][ C0] Modules linked in: [ 210.237566][ C0] CPU: 0 PID: 2602 Comm: fio Tainted: G W 5.10.0+ #50 [ 210.239292][ C0] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015 [ 210.241233][ C0] Call Trace: [ 210.241946][ C0] <IRQ> [ 210.242561][ C0] dump_stack+0x7d/0xa3 [ 210.243466][ C0] __schedule_bug.cold+0xb3/0xc2 [ 210.244539][ C0] __schedule+0x156f/0x20d0 [ 210.245518][ C0] ? io_schedule_timeout+0x140/0x140 [ 210.246660][ C0] schedule+0xd0/0x270 [ 210.247541][ C0] schedule_timeout+0x1fb/0x280 [ 210.248586][ C0] ? usleep_range+0x150/0x150 [ 210.249624][ C0] ? unpoison_range+0x3a/0x60 [ 210.250632][ C0] ? ____kasan_kmalloc.constprop.0+0x82/0xa0 [ 210.251949][ C0] ? unpoison_range+0x3a/0x60 [ 210.252958][ C0] ? __prepare_to_swait+0xa7/0x190 [ 210.254067][ C0] do_wait_for_common+0x2ab/0x370 [ 210.255158][ C0] ? usleep_range+0x150/0x150 [ 210.256192][ C0] ? bit_wait_io_timeout+0x160/0x160 [ 210.257358][ C0] ? blk_update_request+0x757/0x1150 [ 210.258582][ C0] ? _raw_spin_lock_irq+0x82/0xd0 [ 210.259674][ C0] ? _raw_read_unlock_irqrestore+0x30/0x30 [ 210.260917][ C0] wait_for_completion+0x4c/0x90 [ 210.261971][ C0] crypt_convert+0x19a6/0x4c00 [ 210.263033][ C0] ? _raw_spin_lock_irqsave+0x87/0xe0 [ 210.264193][ C0] ? kasan_set_track+0x1c/0x30 [ 210.265191][ C0] ? crypt_iv_tcw_ctr+0x4a0/0x4a0 [ 210.266283][ C0] ? kmem_cache_free+0x104/0x470 [ 210.267363][ C0] ? crypt_endio+0x91/0x180 [ 210.268327][ C0] kcryptd_crypt_read_convert+0x30e/0x420 [ 210.269565][ C0] blk_update_request+0x757/0x1150 [ 210.270563][ C0] blk_mq_end_request+0x4b/0x480 [ 210.271680][ C0] blk_done_softirq+0x21d/0x340 [ 210.272775][ C0] ? _raw_spin_lock+0x81/0xd0 [ 210.273847][ C0] ? blk_mq_stop_hw_queue+0x30/0x30 [ 210.275031][ C0] ? _raw_read_lock_irq+0x40/0x40 [ 210.276182][ C0] __do_softirq+0x190/0x611 [ 210.277203][ C0] ? handle_edge_irq+0x221/0xb60 [ 210.278340][ C0] asm_call_irq_on_stack+0x12/0x20 [ 210.279514][ C0] </IRQ> [ 210.280164][ C0] do_softirq_own_stack+0x37/0x40 [ 210.281281][ C0] irq_exit_rcu+0x110/0x1b0 [ 210.282286][ C0] common_interrupt+0x74/0x120 [ 210.283376][ C0] asm_common_interrupt+0x1e/0x40 [ 210.284496][ C0] RIP: 0010:_aesni_enc1+0x65/0xb0 Fix this by making crypt_convert function reentrant from the point of a single bio and make dm-crypt defer further bio processing to a workqueue, if Crypto API backlogs a request in interrupt context. Fixes: 39d42fa ("dm crypt: add flags to optionally bypass kcryptd workqueues") Cc: stable@vger.kernel.org # v5.9+ Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Acked-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
pull bot
pushed a commit
that referenced
this pull request
Jan 16, 2021
Commit 39d42fa ("dm crypt: add flags to optionally bypass kcryptd workqueues") made it possible for some code paths in dm-crypt to be executed in softirq context, when the underlying driver processes IO requests in interrupt/softirq context. In this case sometimes when allocating a new crypto request we may get a stacktrace like below: [ 210.103008][ C0] BUG: sleeping function called from invalid context at mm/mempool.c:381 [ 210.104746][ C0] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 2602, name: fio [ 210.106599][ C0] CPU: 0 PID: 2602 Comm: fio Tainted: G W 5.10.0+ #50 [ 210.108331][ C0] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015 [ 210.110212][ C0] Call Trace: [ 210.110921][ C0] <IRQ> [ 210.111527][ C0] dump_stack+0x7d/0xa3 [ 210.112411][ C0] ___might_sleep.cold+0x122/0x151 [ 210.113527][ C0] mempool_alloc+0x16b/0x2f0 [ 210.114524][ C0] ? __queue_work+0x515/0xde0 [ 210.115553][ C0] ? mempool_resize+0x700/0x700 [ 210.116586][ C0] ? crypt_endio+0x91/0x180 [ 210.117479][ C0] ? blk_update_request+0x757/0x1150 [ 210.118513][ C0] ? blk_mq_end_request+0x4b/0x480 [ 210.119572][ C0] ? blk_done_softirq+0x21d/0x340 [ 210.120628][ C0] ? __do_softirq+0x190/0x611 [ 210.121626][ C0] crypt_convert+0x29f9/0x4c00 [ 210.122668][ C0] ? _raw_spin_lock_irqsave+0x87/0xe0 [ 210.123824][ C0] ? kasan_set_track+0x1c/0x30 [ 210.124858][ C0] ? crypt_iv_tcw_ctr+0x4a0/0x4a0 [ 210.125930][ C0] ? kmem_cache_free+0x104/0x470 [ 210.126973][ C0] ? crypt_endio+0x91/0x180 [ 210.127947][ C0] kcryptd_crypt_read_convert+0x30e/0x420 [ 210.129165][ C0] blk_update_request+0x757/0x1150 [ 210.130231][ C0] blk_mq_end_request+0x4b/0x480 [ 210.131294][ C0] blk_done_softirq+0x21d/0x340 [ 210.132332][ C0] ? _raw_spin_lock+0x81/0xd0 [ 210.133289][ C0] ? blk_mq_stop_hw_queue+0x30/0x30 [ 210.134399][ C0] ? _raw_read_lock_irq+0x40/0x40 [ 210.135458][ C0] __do_softirq+0x190/0x611 [ 210.136409][ C0] ? handle_edge_irq+0x221/0xb60 [ 210.137447][ C0] asm_call_irq_on_stack+0x12/0x20 [ 210.138507][ C0] </IRQ> [ 210.139118][ C0] do_softirq_own_stack+0x37/0x40 [ 210.140191][ C0] irq_exit_rcu+0x110/0x1b0 [ 210.141151][ C0] common_interrupt+0x74/0x120 [ 210.142171][ C0] asm_common_interrupt+0x1e/0x40 Fix this by allocating crypto requests with GFP_ATOMIC mask in interrupt context. Fixes: 39d42fa ("dm crypt: add flags to optionally bypass kcryptd workqueues") Cc: stable@vger.kernel.org # v5.9+ Reported-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Acked-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
pull bot
pushed a commit
that referenced
this pull request
May 5, 2021
Ritesh reported a bug [1] against UML, noting that it crashed on startup. The backtrace shows the following (heavily redacted): (gdb) bt ... #26 0x0000000060015b5d in sem_init () at ipc/sem.c:268 #27 0x00007f89906d92f7 in ?? () from /lib/x86_64-linux-gnu/libcom_err.so.2 #28 0x00007f8990ab8fb2 in call_init (...) at dl-init.c:72 ... #40 0x00007f89909bf3a6 in nss_load_library (...) at nsswitch.c:359 ... #44 0x00007f8990895e35 in _nss_compat_getgrnam_r (...) at nss_compat/compat-grp.c:486 #45 0x00007f8990968b85 in __getgrnam_r [...] #46 0x00007f89909d6b77 in grantpt [...] #47 0x00007f8990a9394e in __GI_openpty [...] #48 0x00000000604a1f65 in openpty_cb (...) at arch/um/os-Linux/sigio.c:407 #49 0x00000000604a58d0 in start_idle_thread (...) at arch/um/os-Linux/skas/process.c:598 #50 0x0000000060004a3d in start_uml () at arch/um/kernel/skas/process.c:45 #51 0x00000000600047b2 in linux_main (...) at arch/um/kernel/um_arch.c:334 #52 0x000000006000574f in main (...) at arch/um/os-Linux/main.c:144 indicating that the UML function openpty_cb() calls openpty(), which internally calls __getgrnam_r(), which causes the nsswitch machinery to get started. This loads, through lots of indirection that I snipped, the libcom_err.so.2 library, which (in an unknown function, "??") calls sem_init(). Now, of course it wants to get libpthread's sem_init(), since it's linked against libpthread. However, the dynamic linker looks up that symbol against the binary first, and gets the kernel's sem_init(). Hajime Tazaki noted that "objcopy -L" can localize a symbol, so the dynamic linker wouldn't do the lookup this way. I tried, but for some reason that didn't seem to work. Doing the same thing in the linker script instead does seem to work, though I cannot entirely explain - it *also* works if I just add "VERSION { { global: *; }; }" instead, indicating that something else is happening that I don't really understand. It may be that explicitly doing that marks them with some kind of empty version, and that's different from the default. Explicitly marking them with a version breaks kallsyms, so that doesn't seem to be possible. Marking all the symbols as local seems correct, and does seem to address the issue, so do that. Also do it for static link, nsswitch libraries could still be loaded there. [1] https://bugs.debian.org/983379 Reported-by: Ritesh Raj Sarraf <rrs@debian.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com> Tested-By: Ritesh Raj Sarraf <rrs@debian.org> Signed-off-by: Richard Weinberger <richard@nod.at>
pull bot
pushed a commit
that referenced
this pull request
May 10, 2021
An out of bounds write happens when setting the default power state. KASAN sees this as: [drm] radeon: 512M of GTT memory ready. [drm] GART: num cpu pages 131072, num gpu pages 131072 ================================================================== BUG: KASAN: slab-out-of-bounds in radeon_atombios_parse_power_table_1_3+0x1837/0x1998 [radeon] Write of size 4 at addr ffff88810178d858 by task systemd-udevd/157 CPU: 0 PID: 157 Comm: systemd-udevd Not tainted 5.12.0-E620 #50 Hardware name: eMachines eMachines E620 /Nile , BIOS V1.03 09/30/2008 Call Trace: dump_stack+0xa5/0xe6 print_address_description.constprop.0+0x18/0x239 kasan_report+0x170/0x1a8 radeon_atombios_parse_power_table_1_3+0x1837/0x1998 [radeon] radeon_atombios_get_power_modes+0x144/0x1888 [radeon] radeon_pm_init+0x1019/0x1904 [radeon] rs690_init+0x76e/0x84a [radeon] radeon_device_init+0x1c1a/0x21e5 [radeon] radeon_driver_load_kms+0xf5/0x30b [radeon] drm_dev_register+0x255/0x4a0 [drm] radeon_pci_probe+0x246/0x2f6 [radeon] pci_device_probe+0x1aa/0x294 really_probe+0x30e/0x850 driver_probe_device+0xe6/0x135 device_driver_attach+0xc1/0xf8 __driver_attach+0x13f/0x146 bus_for_each_dev+0xfa/0x146 bus_add_driver+0x2b3/0x447 driver_register+0x242/0x2c1 do_one_initcall+0x149/0x2fd do_init_module+0x1ae/0x573 load_module+0x4dee/0x5cca __do_sys_finit_module+0xf1/0x140 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae Without KASAN, this will manifest later when the kernel attempts to allocate memory that was stomped, since it collides with the inline slab freelist pointer: invalid opcode: 0000 [#1] SMP NOPTI CPU: 0 PID: 781 Comm: openrc-run.sh Tainted: G W 5.10.12-gentoo-E620 #2 Hardware name: eMachines eMachines E620 /Nile , BIOS V1.03 09/30/2008 RIP: 0010:kfree+0x115/0x230 Code: 89 c5 e8 75 ea ff ff 48 8b 00 0f ba e0 09 72 63 e8 1f f4 ff ff 41 89 c4 48 8b 45 00 0f ba e0 10 72 0a 48 8b 45 08 a8 01 75 02 <0f> 0b 44 89 e1 48 c7 c2 00 f0 ff ff be 06 00 00 00 48 d3 e2 48 c7 RSP: 0018:ffffb42f40267e10 EFLAGS: 00010246 RAX: ffffd61280ee8d88 RBX: 0000000000000004 RCX: 000000008010000d RDX: 4000000000000000 RSI: ffffffffba1360b0 RDI: ffffd61280ee8d80 RBP: ffffd61280ee8d80 R08: ffffffffb91bebdf R09: 0000000000000000 R10: ffff8fe2c1047ac8 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000100 FS: 00007fe80eff6b68(0000) GS:ffff8fe339c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe80eec7bc0 CR3: 0000000038012000 CR4: 00000000000006f0 Call Trace: __free_fdtable+0x16/0x1f put_files_struct+0x81/0x9b do_exit+0x433/0x94d do_group_exit+0xa6/0xa6 __x64_sys_exit_group+0xf/0xf do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fe80ef64bea Code: Unable to access opcode bytes at RIP 0x7fe80ef64bc0. RSP: 002b:00007ffdb1c47528 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fe80ef64bea RDX: 00007fe80ef64f60 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 R10: 00007fe80ee2c620 R11: 0000000000000246 R12: 00007fe80eff41e0 R13: 00000000ffffffff R14: 0000000000000024 R15: 00007fe80edf9cd0 Modules linked in: radeon(+) ath5k(+) snd_hda_codec_realtek ... Use a valid power_state index when initializing the "flags" and "misc" and "misc2" fields. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211537 Reported-by: Erhard F. <erhard_f@mailbox.org> Fixes: a48b9b4 ("drm/radeon/kms/pm: add asic specific callbacks for getting power state (v2)") Fixes: 79daedc ("drm/radeon/kms: minor pm cleanups") Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
See Commits and Changes for more details.
Created by
pull[bot]