[Docs] Update quick start v2 related docs info (apache#7161)

docs/en/start-v2/docker/docker.md

@@ -3,7 +3,7 @@
 sidebar_position: 3
 -------------------
 
-# Set Up with Docker
+# Set Up With Docker
 
 <!-- TODO -->
 -->

docs/en/start-v2/kubernetes/kubernetes.mdx

@@ -7,27 +7,27 @@ import TabItem from '@theme/TabItem';
 
 # Set Up with Kubernetes
 
-This section provides a quick guide to using SeaTunnel with Kubernetes.
+This section provides a quick guide to use SeaTunnel with Kubernetes.
 
 ## Prerequisites
 
-We assume that you have a local installations of the following:
+We assume that you have one local installation as follow:
 
 - [docker](https://docs.docker.com/)
 - [kubernetes](https://kubernetes.io/)
 - [helm](https://helm.sh/docs/intro/quickstart/)
 
 So that the `kubectl` and `helm` commands are available on your local system.
 
-For kubernetes [minikube](https://minikube.sigs.k8s.io/docs/start/) is our choice, at the time of writing this we are using version v1.23.3. You can start a cluster with the following command:
+Take kubernetes [minikube](https://minikube.sigs.k8s.io/docs/start/) as an example, you can start a cluster with the following command:
 
 ```bash
 minikube start --kubernetes-version=v1.23.3
 ```
 
 ## Installation
 
-### SeaTunnel docker image
+### SeaTunnel Docker Image
 
 To run the image with SeaTunnel, first create a `Dockerfile`:
 
@@ -58,7 +58,7 @@ Then run the following commands to build the image:
 ```bash
 docker build -t seatunnel:2.3.6-flink-1.13 -f Dockerfile .
 ```
-Image `seatunnel:2.3.6-flink-1.13` need to be present in the host (minikube) so that the deployment can take place.
+Image `seatunnel:2.3.6-flink-1.13` needs to be present in the host (minikube) so that the deployment can take place.
 
 Load image to minikube via:
 ```bash
@@ -114,7 +114,7 @@ Then run the following commands to build the image:
 ```bash
 docker build -t seatunnel:2.3.6 -f Dockerfile .
 ```
-Image `seatunnel:2.3.6` need to be present in the host (minikube) so that the deployment can take place.
+Image `seatunnel:2.3.6` needs to be present in the host (minikube) so that the deployment can take place.
 
 Load image to minikube via:
 ```bash
@@ -125,7 +125,7 @@ minikube image load seatunnel:2.3.6
 </Tabs>
 
 
-### Deploying the operator
+### Deploying The Operator
 
 <Tabs
   groupId="engine-type"
@@ -191,7 +191,7 @@ none
   ]}>
 <TabItem value="flink">
 
-In this guide we are going to use [seatunnel.streaming.conf](https://github.com/apache/seatunnel/blob/2.3.6-release/config/v2.streaming.conf.template):
+In this guide we will use [seatunnel.streaming.conf](https://github.com/apache/seatunnel/blob/2.3.6-release/config/v2.streaming.conf.template):
 
 ```conf
 env {
@@ -291,7 +291,7 @@ kubectl apply -f seatunnel-flink.yaml
 
 <TabItem value="Zeta (local-mode)">
 
-In this guide we are going to use [seatunnel.streaming.conf](https://github.com/apache/seatunnel/blob/2.3.6-release/config/v2.streaming.conf.template):
+In this guide we will use [seatunnel.streaming.conf](https://github.com/apache/seatunnel/blob/2.3.6-release/config/v2.streaming.conf.template):
 
 ```conf
 env {
@@ -366,7 +366,7 @@ kubectl apply -f seatunnel.yaml
 
 <TabItem value="Zeta (cluster-mode)">
 
-In this guide we are going to use [seatunnel.streaming.conf](https://github.com/apache/seatunnel/blob/2.3.6-release/config/v2.streaming.conf.template):
+In this guide we will use [seatunnel.streaming.conf](https://github.com/apache/seatunnel/blob/2.3.6-release/config/v2.streaming.conf.template):
 
 ```conf
 env {
@@ -572,7 +572,7 @@ spec:
 ```bash
 kubectl apply -f seatunnel-cluster.yml
 ```
-Then modify the seatunnel configuration in pod using the following command
+Then modify the seatunnel configuration in pod using the following command:
 
 ```bash
 kubectl edit cm hazelcast
@@ -768,5 +768,5 @@ Happy SeaTunneling!
 
 ## What's More
 
-For now, you are already taking a quick look at SeaTunnel, you could see [connector](/category/connector) to find all source and sink SeaTunnel supported.
+For now, you have taken a quick look at SeaTunnel, and you can see [connector](/category/connector) to find all sources and sinks SeaTunnel supported.
 Or see [deployment](../deployment.mdx) if you want to submit your application in another kind of your engine cluster.

docs/en/start-v2/locally/deployment.md

@@ -16,31 +16,31 @@ Before starting to download SeaTunnel, you need to ensure that you have installe
 
 ## Step 2: Download SeaTunnel
 
-Go to the [seatunnel download page](https://seatunnel.apache.org/download) to download the latest version of the release version installation package `seatunnel-<version>-bin.tar.gz`.
+Visit the [SeaTunnel Download Page](https://seatunnel.apache.org/download) to download the latest binary package `seatunnel-<version>-bin.tar.gz`.
 
-Or you can also download it through the terminal.
+Or you can also download it through the terminal:
 
 ```shell
 export version="2.3.6"
 wget "https://archive.apache.org/dist/seatunnel/${version}/apache-seatunnel-${version}-bin.tar.gz"
 tar -xzvf "apache-seatunnel-${version}-bin.tar.gz"
 ```
 
-## Step 3: Download the connector plug-in
+## Step 3: Download The Connector Plugins
 
-Starting from the 2.2.0-beta version, the binary package no longer provides the connector dependency by default. Therefore, when using it for the first time, you need to execute the following command to install the connector: (Of course, you can also manually download the connector from the [Apache Maven Repository](https://repo.maven.apache.org/maven2/org/apache/seatunnel/), and then move it to the `connectors/seatunnel` directory).
+Starting from the 2.2.0-beta version, the binary package no longer provides the connector dependencies by default. Therefore, when using it for the first time, you need to execute the following command to install the connectors (Of course, you can also manually download the connector from the [Apache Maven Repository](https://repo.maven.apache.org/maven2/org/apache/seatunnel/), and then move it to the `connectors/seatunnel` directory) :
 
 ```bash
-sh bin/install-plugin.sh 2.3.6
+sh bin/install-plugin.sh
 ```
 
-If you need a specific connector version, taking 2.3.6 as an example, you need to execute the following command.
+If you need a specific connector version, taking 2.3.6 as an example, you need to execute the following command:
 
 ```bash
 sh bin/install-plugin.sh 2.3.6
 ```
 
-Usually you don't need all the connector plugins, so you can specify the plugins you need through configuring `config/plugin_config`, for example, if you only need the `connector-console` plugin, then you can modify the plugin.properties configuration file as follows.
+Usually you don't need all connector plugins, so you can specify the plugins you need through configuring `config/plugin_config`. For example, if you only need the `connector-console` plugin, you can modify the plugin.properties configuration file as follows:
 
 ```plugin_config
 --seatunnel-connectors--
@@ -61,14 +61,14 @@ You can find all supported connectors and the corresponding plugin_config config
 
 :::tip Tip
 
-If you want to install connector plugins by manually downloading connectors, you only need to download the connector plugins you need and place them in the `${SEATUNNEL_HOME}/connectors/` directory
+If you want to install connector plugins by manually downloading connectors, you only need to download the related connector plugins and place them in the `${SEATUNNEL_HOME}/connectors/` directory.
 
 :::
 
-Now you have completed the download of the SeaTunnel installation package and the download of the connector plug-in. Next, you can choose different running modes according to your needs to run or deploy SeaTunnel.
+Now you have downloaded the SeaTunnel binary package and the connector plugins. Next, you can choose different engine option to run synchronization tasks.
 
-If you use Flink to run the synchronization task, in this mode, there is no need to deploy the SeaTunnel Engine service cluster. You can refer to [Quick Start of SeaTunnel Flink Engine](quick-start-flink.md) to run your synchronization task.
+If you use Flink to run the synchronization task, there is no need to deploy the SeaTunnel Engine service cluster. You can refer to [Quick Start of SeaTunnel Flink Engine](quick-start-flink.md) to run your synchronization task.
 
-If you use Spark to run the synchronization task, in this mode, there is no need to deploy the SeaTunnel Engine service cluster. You can refer to [Quick Start of SeaTunnel Spark Engine](quick-start-spark.md) to run your synchronization task.
+If you use Spark to run the synchronization task, there is no need to deploy the SeaTunnel Engine service cluster. You can refer to [Quick Start of SeaTunnel Spark Engine](quick-start-spark.md) to run your synchronization task.
 
-If you use the SeaTunnel Engine (Zeta) that comes with SeaTunnel to run tasks, you need to deploy the SeaTunnel Engine service first. Refer to [Deployment of SeaTunnel Engine (Zeta) Service](quick-start-seatunnel-engine.md).
+If you use the builtin SeaTunnel Engine (Zeta) to run tasks, you need to deploy the SeaTunnel Engine service first. Refer to [Deployment of SeaTunnel Engine (Zeta) Service](quick-start-seatunnel-engine.md).

docs/en/start-v2/locally/quick-start-flink.md

@@ -5,18 +5,17 @@ sidebar_position: 3
 
 # Quick Start With Flink
 
-## Step 1: Deployment SeaTunnel And Connectors
+## Step 1: Deploy SeaTunnel And Connectors
 
-Before starting, make sure you have downloaded and deployed SeaTunnel as described in [deployment](deployment.md)
+Before starting, make sure you have downloaded and deployed SeaTunnel as described in [Deployment](deployment.md)
 
 ## Step 2: Deployment And Config Flink
 
-Please [download Flink](https://flink.apache.org/downloads.html) first(**required version >= 1.12.0**). For more information you could see [Getting Started: standalone](https://nightlies.apache.org/flink/flink-docs-release-1.14/docs/deployment/resource-providers/standalone/overview/)
+Please [Download Flink](https://flink.apache.org/downloads.html) first(**required version >= 1.12.0**). For more information you can see [Getting Started: Standalone](https://nightlies.apache.org/flink/flink-docs-release-1.14/docs/deployment/resource-providers/standalone/overview/)
 
-**Configure SeaTunnel**: Change the setting in `config/seatunnel-env.sh`, it is base on the path your engine install at [deployment](deployment.md).
-Change `FLINK_HOME` to the Flink deployment dir.
+**Configure SeaTunnel**: Change the setting in `${SEATUNNEL_HOME}/config/seatunnel-env.sh` and set `FLINK_HOME` to the Flink deployment dir.
 
-## Step 3: Add Job Config File to define a job
+## Step 3: Add Job Config File To Define A Job
 
 Edit `config/v2.streaming.conf.template`, which determines the way and logic of data input, processing, and output after seatunnel is started.
 The following is an example of the configuration file, which is the same as the example application mentioned above.
@@ -59,30 +58,30 @@ sink {
 
 ```
 
-More information about config please check [config concept](../../concept/config.md)
+More information about config please check [Config Concept](../../concept/config.md)
 
 ## Step 4: Run SeaTunnel Application
 
-You could start the application by the following commands
+You can start the application by the following commands:
 
-flink version between `1.12.x` and `1.14.x`
+Flink version between `1.12.x` and `1.14.x`
 
 ```shell
 cd "apache-seatunnel-${version}"
 ./bin/start-seatunnel-flink-13-connector-v2.sh --config ./config/v2.streaming.conf.template
 ```
 
-flink version between `1.15.x` and `1.16.x`
+Flink version between `1.15.x` and `1.16.x`
 
 ```shell
 cd "apache-seatunnel-${version}"
 ./bin/start-seatunnel-flink-15-connector-v2.sh --config ./config/v2.streaming.conf.template
 ```
 
-**See The Output**: When you run the command, you could see its output in your console. You can think this
-is a sign that the command ran successfully or not.
+**See The Output**: When you run the command, you can see its output in your console. This
+is a sign to determine whether the command ran successfully or not.
 
-The SeaTunnel console will prints some logs as below:
+The SeaTunnel console will print some logs as below:
 
 ```shell
 fields : name, age
@@ -107,7 +106,7 @@ row=16 : SGZCr, 94186144
 
 ## What's More
 
-For now, you are already take a quick look about SeaTunnel with Flink, you could see [connector](/docs/category/connector-v2) to find all
-source and sink SeaTunnel supported. Or see [SeaTunnel With Flink](../../other-engine/flink.md) if you want to know more about SeaTunnel Run With Flink.
+For now, you have taken a quick look about SeaTunnel with Flink, and you can see [Connector](/docs/category/connector-v2) to find all
+sources and sinks SeaTunnel supported. Or see [SeaTunnel With Flink](../../other-engine/flink.md) if you want to know more about SeaTunnel With Flink.
 
-SeaTunnel have an own engine named `Zeta` and `Zeta` is the default engine of SeaTunnel. You can follow [Quick Start](quick-start-seatunnel-engine.md) to configure and run a data synchronization job.
+SeaTunnel have a builtin engine named `Zeta`, and it's the default engine of SeaTunnel. You can follow [Quick Start](quick-start-seatunnel-engine.md) to configure and run a data synchronization job.

docs/en/start-v2/locally/quick-start-seatunnel-engine.md

@@ -5,11 +5,11 @@ sidebar_position: 2
 
 # Quick Start With SeaTunnel Engine
 
-## Step 1: Deployment SeaTunnel And Connectors
+## Step 1: Deploy SeaTunnel And Connectors
 
-Before starting, make sure you have downloaded and deployed SeaTunnel as described in [deployment](deployment.md)
+Before starting, make sure you have downloaded and deployed SeaTunnel as described in [Deployment](deployment.md)
 
-## Step 2: Add Job Config File to define a job
+## Step 2: Add Job Config File To Define A Job
 
 Edit `config/v2.batch.config.template`, which determines the way and logic of data input, processing, and output after seatunnel is started.
 The following is an example of the configuration file, which is the same as the example application mentioned above.
@@ -52,11 +52,11 @@ sink {
 
 ```
 
-More information about config please check [config concept](../../concept/config.md)
+More information can be found in [Config Concept](../../concept/config.md)
 
 ## Step 3: Run SeaTunnel Application
 
-You could start the application by the following commands
+You could start the application by the following commands:
 
 :::tip
 
@@ -70,10 +70,10 @@ cd "apache-seatunnel-${version}"
 
 ```
 
-**See The Output**: When you run the command, you could see its output in your console. You can think this
-is a sign that the command ran successfully or not.
+**See The Output**: When you run the command, you can see its output in your console. This
+is a sign to determine whether the command ran successfully or not.
 
-The SeaTunnel console will prints some logs as below:
+The SeaTunnel console will print some logs as below:
 
 ```shell
 2022-12-19 11:01:45,417 INFO  org.apache.seatunnel.connectors.seatunnel.console.sink.ConsoleSinkWriter - output rowType: name<STRING>, age<INT>
@@ -97,5 +97,5 @@ The SeaTunnel console will prints some logs as below:
 
 ## What's More
 
-For now, you are already take a quick look about SeaTunnel, you could see [connector](../../connector-v2/source/FakeSource.md) to find all
-source and sink SeaTunnel supported. Or see [SeaTunnel Engine(Zeta)](../../seatunnel-engine/about.md) if you want to know more about SeaTunnel Engine. Here you will learn how to deploy SeaTunnel Engine in cluster mode and how to use it in cluster mode.
+For now, you have taken a quick look about SeaTunnel, and you can see [connector](../../connector-v2/source/FakeSource.md) to find all
+sources and sinks SeaTunnel supported. Or see [SeaTunnel Engine(Zeta)](../../seatunnel-engine/about.md) if you want to know more about SeaTunnel Engine. Here you will learn how to deploy SeaTunnel Engine and how to use it in cluster mode.

docs/en/start-v2/locally/quick-start-spark.md

@@ -7,17 +7,16 @@ sidebar_position: 4
 
 ## Step 1: Deployment SeaTunnel And Connectors
 
-Before starting, make sure you have downloaded and deployed SeaTunnel as described in [deployment](deployment.md)
+Before starting, make sure you have downloaded and deployed SeaTunnel as described in [Deployment](deployment.md)
 
-## Step 2: Deployment And Config Spark
+## Step 2: Deploy And Config Spark
 
-Please [download Spark](https://spark.apache.org/downloads.html) first(**required version >= 2.4.0**). For more information you could
-see [Getting Started: standalone](https://spark.apache.org/docs/latest/spark-standalone.html#installing-spark-standalone-to-a-cluster)
+Please [Download Spark](https://spark.apache.org/downloads.html) first(**required version >= 2.4.0**). For more information you can
+see [Getting Started: Standalone](https://spark.apache.org/docs/latest/spark-standalone.html#installing-spark-standalone-to-a-cluster)
 
-**Configure SeaTunnel**: Change the setting in `config/seatunnel-env.sh`, it is base on the path your engine install at [deployment](deployment.md).
-Change `SPARK_HOME` to the Spark deployment dir.
+**Configure SeaTunnel**: Change the setting in `${SEATUNNEL_HOME}/config/seatunnel-env.sh` and set `SPARK_HOME` to the Spark deployment dir.
 
-## Step 3: Add Job Config File to define a job
+## Step 3: Add Job Config File To Define A Job
 
 Edit `config/seatunnel.streaming.conf.template`, which determines the way and logic of data input, processing, and output after seatunnel is started.
 The following is an example of the configuration file, which is the same as the example application mentioned above.
@@ -60,13 +59,13 @@ sink {
 
 ```
 
-More information about config please check [config concept](../../concept/config.md)
+More information about config please check [Config Concept](../../concept/config.md)
 
 ## Step 4: Run SeaTunnel Application
 
-You could start the application by the following commands
+You could start the application by the following commands:
 
-spark 2.4.x
+Spark 2.4.x
 
 ```bash
 cd "apache-seatunnel-${version}"
@@ -76,7 +75,7 @@ cd "apache-seatunnel-${version}"
 --config ./config/v2.streaming.conf.template
 ```
 
-spark3.x.x
+Spark3.x.x
 
 ```shell
 cd "apache-seatunnel-${version}"
@@ -86,10 +85,10 @@ cd "apache-seatunnel-${version}"
 --config ./config/v2.streaming.conf.template
 ```
 
-**See The Output**: When you run the command, you could see its output in your console. You can think this
-is a sign that the command ran successfully or not.
+**See The Output**: When you run the command, you can see its output in your console. This
+is a sign to determine whether the command ran successfully or not.
 
-The SeaTunnel console will prints some logs as below:
+The SeaTunnel console will print some logs as below:
 
 ```shell
 fields : name, age
@@ -114,7 +113,7 @@ row=16 : SGZCr, 94186144
 
 ## What's More
 
-For now, you are already take a quick look about SeaTunnel with Spark, you could see [connector](/docs/category/connector-v2) to find all
-source and sink SeaTunnel supported. Or see [SeaTunnel With Spark](../../other-engine/spark.md) if you want to know more about SeaTunnel Run With Spark.
+For now, you have taken a quick look about SeaTunnel with Spark, and you can see [Connector](/docs/category/connector-v2) to find all
+sources and sinks SeaTunnel supported. Or see [SeaTunnel With Spark](../../other-engine/spark.md) if you want to know more about SeaTunnel With Spark.
 
-SeaTunnel have an own engine named `Zeta` and `Zeta` is the default engine of SeaTunnel. You can follow [Quick Start](quick-start-seatunnel-engine.md) to configure and run a data synchronization job.
+SeaTunnel have a builtin engine named `Zeta`, and it's the default engine of SeaTunnel. You can follow [Quick Start](quick-start-seatunnel-engine.md) to configure and run a data synchronization job.