matiocpp

matiocpp is a c++ library to enable easy loading/writing matlab files using C++. matiocpp is licensed under GPLv3.

Prerequisites

Currently, matiocpp has only been built and tested with Linux 64bit (distributions: Debian 6.0 and Redhat 6.x) and Windows 32bit (mingw32 and MXE).

Base requirements:

1. Boost (tested with >1.49), in particular boost::filesystem must be v3!
   
2. matio tested with 1.5.x and above

Compiling and installing

Compiling and installing matiocpp is done by using cmake (2.8.x required):

git clone https://github.com/cipherz/matiocpp.git
cd matiocpp
mkdir build
cd build
cmake ..
make
cpack .

Depending on your system (windows: tgz or linux: deb/tgz) can now be installed. The following cmake parameters are supported:

-DCMAKE_BUILD_TYPE - Can be [Debug,Release]
-DWITH_STATIC - Compiles static library [1,0]
-DWITH_SHARED - Compiles shared library [1,0]

Cross-compiling matiocpp with MXE has been tested and should work if you built matio for MXE and then built with -DCMAKE_TOOLCHAIN_FILE=mxetoolchain.