VerneMQ race condition test

This plugin illustrates race condition in vmq_reg:subscribe()

How to run

To build and run vernemq with plugin enabled:

make

You must also connect a client like this (plugin only starts spitting output after a client subcribes to any topic):

mosquitto_sub -V 5 -q 0 -h 0.0.0.0 -p 1883 -i debugclient -t 'sometopic'

After a client subscribes plugin every 5 seconds performs this sequence of events:

• issue concurrent subscribes to topics a/events and b/events
• check if client total topics is 3 (which is correct) or less
• cleanup before next loop iteration

Example output

14:14:08.627 [info] auth_on_subscribe_m5 hook for SubscriberId: {[],<<"debug-x-26.devops.svc.example.org">>}, starting testp_checker loop
14:14:14.130 [error] ERROR!!! Total topics should be 3, got = 2, topics = [[<<"b">>,<<"events">>],[<<"sometopic">>]]
14:14:19.129 [error] ERROR!!! Total topics should be 3, got = 2, topics = [[<<"a">>,<<"events">>],[<<"sometopic">>]]
14:14:24.130 [error] ERROR!!! Total topics should be 3, got = 2, topics = [[<<"a">>,<<"events">>],[<<"sometopic">>]]
14:14:29.130 [error] ERROR!!! Total topics should be 3, got = 2, topics = [[<<"b">>,<<"events">>],[<<"sometopic">>]]
14:14:34.130 [error] ERROR!!! Total topics should be 3, got = 2, topics = [[<<"b">>,<<"events">>],[<<"sometopic">>]]
14:14:39.130 [error] ERROR!!! Total topics should be 3, got = 2, topics = [[<<"b">>,<<"events">>],[<<"sometopic">>]]

As you can see, sometimes there is no b/events and sometimes there is no a/events.

This happens in concurrent environment since vmq_reg:subscribe first queries existings subs and then updates them, but NOT in atomic fashion.