CI #63
khanghugoAnnotations
2 errors and 36 warnings
|
Build on Linux (Debug)
This request was automatically failed because there were no enabled runners online to process the request for more than 1 days.
|
|
Build on Linux (Release)
This request was automatically failed because there were no enabled runners online to process the request for more than 1 days.
|
|
Build on Windows (Debug, COF=ON)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1, MarkusJx/install-boost@v2.0.0, actions/upload-artifact@v2. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Build on Windows (Debug, COF=ON)
The following actions use a deprecated Node.js version and will be forced to run on node20: actions/checkout@v2, actions-rs/toolchain@v1, MarkusJx/install-boost@v2.0.0, actions/upload-artifact@v2. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
|
|
Build on Windows (Debug, COF=ON)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build on Windows (Debug, COF=ON)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build on Windows (Debug, COF=ON)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build on Windows (Debug, COF=ON)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build on Windows (Debug, COF=ON)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build on Windows (Debug, COF=ON)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build on Windows (Release, COF=OFF)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1, MarkusJx/install-boost@v2.0.0, actions/upload-artifact@v2. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Build on Windows (Release, COF=OFF)
The following actions use a deprecated Node.js version and will be forced to run on node20: actions/checkout@v2, actions-rs/toolchain@v1, MarkusJx/install-boost@v2.0.0, actions/upload-artifact@v2. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
|
|
Build on Windows (Release, COF=OFF)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build on Windows (Release, COF=OFF)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build on Windows (Release, COF=OFF)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build on Windows (Release, COF=OFF)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build on Windows (Release, COF=OFF)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build on Windows (Release, COF=OFF)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build on Windows (Debug, COF=OFF)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1, MarkusJx/install-boost@v2.0.0, actions/upload-artifact@v2. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Build on Windows (Debug, COF=OFF)
The following actions use a deprecated Node.js version and will be forced to run on node20: actions/checkout@v2, actions-rs/toolchain@v1, MarkusJx/install-boost@v2.0.0, actions/upload-artifact@v2. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
|
|
Build on Windows (Debug, COF=OFF)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build on Windows (Debug, COF=OFF)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build on Windows (Debug, COF=OFF)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build on Windows (Debug, COF=OFF)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build on Windows (Debug, COF=OFF)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build on Windows (Debug, COF=OFF)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build on Windows (Release, COF=ON)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1, MarkusJx/install-boost@v2.0.0, actions/upload-artifact@v2. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Build on Windows (Release, COF=ON)
The following actions use a deprecated Node.js version and will be forced to run on node20: actions/checkout@v2, actions-rs/toolchain@v1, MarkusJx/install-boost@v2.0.0, actions/upload-artifact@v2. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
|
|
Build on Windows (Release, COF=ON)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build on Windows (Release, COF=ON)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build on Windows (Release, COF=ON)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build on Windows (Release, COF=ON)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build on Windows (Release, COF=ON)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build on Windows (Release, COF=ON)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build under Flatpak
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, bilelmoussaoui/flatpak-github-actions/flatpak-builder@v3. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Build under Flatpak
The following actions use a deprecated Node.js version and will be forced to run on node20: actions/checkout@v2, bilelmoussaoui/flatpak-github-actions/flatpak-builder@v3. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
|
|
CI
The ubuntu-18.04 environment is deprecated, consider switching to ubuntu-20.04(ubuntu-latest), or ubuntu-22.04 instead. For more details see https://github.com/actions/virtual-environments/issues/6002
|
|
Deprecation notice: v1, v2, and v3 of the artifact actions
The following artifacts were uploaded using a version of actions/upload-artifact that is scheduled for deprecation: "app", "BunnymodXT-CoF-Windows-Debug", "BunnymodXT-CoF-Windows-Release", "BunnymodXT-Windows-Debug", "BunnymodXT-Windows-Release".
Please update your workflow to use v4 of the artifact actions.
Learn more: https://github.blog/changelog/2024-04-16-deprecation-notice-v3-of-the-artifact-actions/
|
Artifacts
Produced during runtime
| Name | Size | |
|---|---|---|
|
BunnymodXT-CoF-Windows-Debug
Expired
|
6.87 MB |
|
|
BunnymodXT-CoF-Windows-Release
Expired
|
2.08 MB |
|
|
BunnymodXT-Windows-Debug
Expired
|
6.87 MB |
|
|
BunnymodXT-Windows-Release
Expired
|
2.08 MB |
|
|
app
Expired
|
1.79 MB |
|