If you are using a released version of Kubernetes, you should refer to the docs that go with that version.
The latest 1.0.x release of this document can be found [here](http://releases.k8s.io/release-1.0/docs/proposals/resource-qos.md).Documentation for other releases can be found at releases.k8s.io.
Author: Ananya Kumar (@AnanyaKumar) Vishnu Kannan (@vishh)
Status: Design & Implementation in progress.
This document presents the design of resource quality of service for containers in Kubernetes, and describes use cases and implementation details.
Quality of Service is still under development. Look here for more details
Kubernetes allocates resources to containers in a simple way. Users can specify resource limits for containers. For example, a user can specify a 1gb memory limit for a container. The scheduler uses resource limits to schedule containers (technically, the scheduler schedules pods comprised of containers). For example, the scheduler will not place 5 containers with a 1gb memory limit onto a machine with 4gb memory. Currently, Kubernetes does not have robust mechanisms to ensure that containers run reliably on an overcommitted system.
In the current implementation, if users specify limits for every container, cluster utilization is poor. Containers often don’t use all the resources that they request which leads to a lot of wasted resources. For example, we might have 4 containers, each reserving 1GB of memory in a node with 4GB memory but only using 500MB of memory. Theoretically, we could fit more containers on the node, but Kubernetes will not schedule new pods (with specified limits) on the node.
A possible solution is to launch containers without specified limits - containers that don't ask for any resource guarantees. But containers with limits specified are not very well protected from containers without limits specified. If a container without a specified memory limit goes overboard and uses lots of memory, other containers (with specified memory limits) might be killed. This is bad, because users often want a way to launch containers that have resources guarantees, and that stay up reliably.
This proposal provides mechanisms for oversubscribing nodes while maintaining resource guarantees, by allowing containers to specify levels of resource guarantees. Containers will be able to request for a minimum resource guarantee. The request is different from the limit - containers will not be allowed to exceed resource limits. With this change, users can launch best-effort containers with 0 request. Best-effort containers use resources only if not being used by other containers, and can be used for resource-scavenging. Supporting best-effort containers in Borg increased utilization by about 20%, and we hope to see similar improvements in Kubernetes.
Note: this section describes the functionality that QoS should eventually provide. Due to implementation issues, providing some of these guarantees, while maintaining our broader goals of efficient cluster utilization, is difficult. Later sections will go into the nuances of how the functionality will be achieved, and limitations of the initial implementation.
For each resource, containers can specify a resource request and limit, 0 <= request <= limit <= Infinity. If the container is successfully scheduled, the container is guaranteed the amount of resource requested. The container will not be allowed to exceed the specified limit. How the request and limit are enforced depends on whether the resource is compressible or incompressible.
- For now, we are only supporting CPU.
- Containers are guaranteed to get the amount of CPU they request, they may or may not get additional CPU time (depending on the other jobs running).
- Excess CPU resources will be distributed based on the amount of CPU requested. For example, suppose container A requests for 60% of the CPU, and container B requests for 30% of the CPU. Suppose that both containers are trying to use as much CPU as they can. Then the extra 10% of CPU will be distributed to A and B in a 2:1 ratio (implementation discussed in later sections).
- Containers will be throttled if they exceed their limit. If limit is unspecified, then the containers can use excess CPU when available.
- For now, we are only supporting memory.
- Containers will get the amount of memory they request, if they exceed their memory request, they could be killed (if some other container needs memory), but if containers consume fewer resources than requested, they will not be killed (except in cases where system tasks or daemons need more memory).
- Containers will be killed if they use more memory than their limit.
- Pods will be admitted by Kubelet based on the sum of requests of its containers. The Kubelet will ensure that sum of requests of all containers (over all pods) is within the system’s resource (for both memory and CPU).
In an overcommitted system (where sum of requests > machine capacity) containers might eventually have to be killed, for example if the system runs out of CPU or memory resources. Ideally, we should kill containers that are less important. For each resource, we divide containers into 3 QoS classes: Guaranteed, Burstable, and Best-Effort, in decreasing order of priority.
The relationship between "Requests and Limits" and "QoS Classes" is subtle. Theoretically, the policy of classifying containers into QoS classes is orthogonal to the requests and limits specified for the container. Hypothetically, users could use an (currently unplanned) API to specify whether a container is guaranteed or best-effort. However, in this proposal, the policy of classifying containers into QoS classes is intimately tied to "Requests and Limits" - in fact, QoS classes are used to implement some of the memory guarantees described in the previous section.
For each resource, containers will be split into 3 different classes
- For now, we will only focus on memory. Containers will not be killed if CPU guarantees cannot be met (for example if system tasks or daemons take up lots of CPU), they will be temporarily throttled.
- Containers with a 0 memory request are classified as memory Best-Effort. These containers are not requesting resource guarantees, and will be treated as lowest priority (processes in these containers are the first to get killed if the system runs out of memory).
- Containers with the same request and limit and non-zero request are classified as memory Guaranteed. These containers ask for a well-defined amount of the resource and are considered top-priority (with respect to memory usage).
- All other containers are memory Burstable - middle priority containers that have some form of minimal resource guarantee, but can use more resources when available.
- In the current policy and implementation, best-effort containers are technically a subset of Burstable containers (where the request is 0), but they are a very important special case. Memory best-effort containers don't ask for any resource guarantees so they can utilize unused resources in a cluster (resource scavenging).
An alternative is to have user-specified numerical priorities that guide Kubelet on which tasks to kill (if the node runs out of memory, lower priority tasks will be killed). A strict hierarchy of user-specified numerical priorities is not desirable because:
- Achieved behavior would be emergent based on how users assigned priorities to their containers. No particular SLO could be delivered by the system, and usage would be subject to gaming if not restricted administratively
- Changes to desired priority bands would require changes to all user container configurations.
This feature is still under development. Following are some of the primary issues.
-
Our current design supports QoS per-resource. Given that unified hierarchy is in the horizon, a per-resource QoS cannot be supported. #14943 has more information.
-
Scheduler does not take usage into account. The scheduler can pile up BestEffort tasks on a node and cause resource pressure. #14081 needs to be resolved for the scheduler to start utilizing node's usage.
The semantics of this feature can change in subsequent releases.
The above implementation provides for basic oversubscription with protection, but there are a number of issues. Below is a list of issues and TODOs for each of them. The first iteration of QoS will not solve these problems, but we aim to solve them in subsequent iterations of QoS. This list is not exhaustive. We expect to add issues to the list, and reference issues and PRs associated with items on this list.
Supporting other platforms:
- RKT: The proposal focuses on Docker. TODO: add support for RKT.
- Systemd: Systemd platforms need to be handled in a different way. Handling distributions of Linux based on systemd is critical, because major Linux distributions like Debian and Ubuntu are moving to systemd. TODO: Add code to handle systemd based operating systems.
Protecting containers and guarantees:
- Control loops: The OOM score assignment is not perfect for burstable containers, and system OOM kills are expensive. TODO: Add a control loop to reduce memory pressure, while ensuring guarantees for various containers.
- Kubelet, Kube-proxy, Docker daemon protection: If a system is overcommitted with memory guaranteed containers, then all prcoesses will have an OOM_SCORE of 0. So Docker daemon could be killed instead of a container or pod being killed. TODO: Place all user-pods into a separate cgroup, and set a limit on the memory they can consume. Initially, the limits can be based on estimated memory usage of Kubelet, Kube-proxy, and CPU limits, eventually we can monitor the resources they consume.
- OOM Assignment Races: We cannot set OOM_SCORE_ADJ of a process until it has launched. This could lead to races. For example, suppose that a memory burstable container is using 70% of the system’s memory, and another burstable container is using 30% of the system’s memory. A best-effort burstable container attempts to launch on the Kubelet. Initially the best-effort container is using 2% of memory, and has an OOM_SCORE_ADJ of 20. So its OOM_SCORE is lower than the burstable pod using 70% of system memory. The burstable pod will be evicted by the best-effort pod. Short-term TODO: Implement a restart policy where best-effort pods are immediately evicted if OOM killed, but burstable pods are given a few retries. Long-term TODO: push support for OOM scores in cgroups to the upstream Linux kernel.
- Swap Memory: The QoS proposal assumes that swap memory is disabled. If swap is enabled, then resource guarantees (for pods that specify resource requirements) will not hold. For example, suppose 2 guaranteed pods have reached their memory limit. They can start allocating memory on swap space. Eventually, if there isn’t enough swap space, processes in the pods might get killed. TODO: ensure that swap space is disabled on our cluster setups scripts.
Killing and eviction mechanics:
- Killing Containers: Usually, containers cannot function properly if one of the constituent processes in the container is killed. TODO: When a process in a container is out of resource killed (e.g. OOM killed), kill the entire container.
- Out of Resource Eviction: If a container in a multi-container pod fails, we might want restart the entire pod instead of just restarting the container. In some cases (e.g. if a memory best-effort container is out of resource killed), we might change pods to "failed" phase and pods might need to be evicted. TODO: Draft a policy for out of resource eviction and implement it.
Maintaining CPU performance:
- CPU-sharing Issues Suppose that a node is running 2 container: a container A requesting for 50% of CPU (but without a CPU limit), and a container B not requesting for resoruces. Suppose that both pods try to use as much CPU as possible. After the proposal is implemented, A will get 100% of the CPU, and B will get around 0% of the CPU. However, a fairer scheme would give the Burstable container 75% of the CPU and the Best-Effort container 25% of the CPU (since resources past the Burstable container’s request are not guaranteed). TODO: think about whether this issue to be solved, implement a solution.
- CPU kills: System tasks or daemons like the Kubelet could consume more CPU, and we won't be able to guarantee containers the CPU amount they requested. If the situation persists, we might want to kill the container. TODO: Draft a policy for CPU usage killing and implement it.
- CPU limits: Enabling CPU limits can be problematic, because processes might be hard capped and might stall for a while. TODO: Enable CPU limits intelligently using CPU quota and core allocation.
Documentation:
- Documentation: TODO: add user docs for resource QoS