simpleklor

Original projects:

• https://github.com/GEIGEIGEIST/KLOR
• https://github.com/sadekbaroudi/KLOR

Some Notes:

• Don't bother with LED. I lost a board this way and soldering them is a massive pain in the ass.
• Don't just solder the microcontroller to the board, use headers, some coolones I found:
  • TODO: Add some links.

Cool ideas for using rotary encoders

To practice typing I found two websites useful. First is focused on improvement second you type out book

Clone the repo

Repository is setup in a way that it can be directly copied into the QMK directory. To achieve this follow the steps:

1. Setup QMK on your machine.
2. Clone this repo into qmk_firmware/keyboards/.
   • cd qmk_firmware/keyboards/
   • git submodule add https://github.com/k-wozniak/SimpleKlor.git simpleklor

This allows to make changes and not worry about stuff.

More Info


A short description of the keyboard/project:

• Keyboard Maintainer: Kamil Wozniak
• Hardware Supported: The PCBs, controllers supported
• Hardware Availability: Links to where you can find this hardware

Make example for this keyboard (after setting up your build environment):

qmk compile -kb simpleklor -km default

Flashing example for this keyboard:

make simpleklor:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

• Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
• Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
• Keycode in layout: Press the key mapped to QK_BOOT if it is available

LAYOUTS