Skip to content

Well-structured Arrays with fast random-element-access for Elixir, offering a common interface with multiple implementations with varying performance guarantees that can be switched in your configuration.

Notifications You must be signed in to change notification settings

jzimbel-mbta/elixir-arrays

 
 

Repository files navigation

Arrays

Arrays is a library to work with well-structured Arrays with fast random-element-access for Elixir, offering a common interface with multiple implementations with varying performance guarantees that can be switched in your configuration.

hex.pm version Documentation ci Coverage Status

Installation

Arrays is available in Hex and can be installed by adding arrays to your list of dependencies in mix.exs:

def deps do
[
  {:arrays, "~> 2.0"}
]
end

Documentation can be found at https://hexdocs.pm/arrays.


Using Arrays

Some simple examples:

Constructing Arrays

By calling Arrays.new or Arrays.empty:

    iex> Arrays.new(["Dvorak", "Tchaikovsky", "Bruch"])
    #Arrays.Implementations.MapArray<["Dvorak", "Tchaikovsky", "Bruch"]>

    iex> Arrays.new(["Dvorak", "Tchaikovsky", "Bruch"], implementation: Arrays.Implementations.ErlangArray)
    #Arrays.Implementations.ErlangArray<["Dvorak", "Tchaikovsky", "Bruch"]>

By using Collectable:

    iex> [1, 2, 3] |> Enum.into(Arrays.new())
    #Arrays.Implementations.MapArray<[1, 2, 3]>
    iex> for x <- 1..2, y <- 4..5, into: Arrays.new(), do: {x, y}
    #Arrays.Implementations.MapArray<[{1, 4}, {1, 5}, {2, 4}, {2, 5}]>

Some common array operations:

  • Indexing is fast.
  • The full Access calls are supported,
  • Variants of many common Enum-like functions that keep the result an array (rather than turning it into a list), are available.
    iex> words = Arrays.new(["the", "quick", "brown", "fox", "jumps", "over", "the", "lazy", "dog"])
    #Arrays.Implementations.MapArray<["the", "quick", "brown", "fox", "jumps", "over", "the", "lazy", "dog"]>
    iex> Arrays.size(words) # Runs in constant-time
    9
    iex> words[3] # Indexing is fast
    "fox"
    iex> words = put_in(words[2], "purple") # All of `Access` is supported
    #Arrays.Implementations.MapArray<["the", "quick", "purple", "fox", "jumps", "over", "the", "lazy", "dog"]>
    iex> # Common operations are available without having to turn the array back into a list (as `Enum` functions would do):
    iex> Arrays.map(words, &String.upcase/1) # Map a function, keep result an array
    #Arrays.Implementations.MapArray<["THE", "QUICK", "PURPLE", "FOX", "JUMPS", "OVER", "THE", "LAZY", "DOG"]>
    iex> lengths = Arrays.map(words, &String.length/1)
    #Arrays.Implementations.MapArray<[3, 5, 6, 3, 5, 4, 3, 4, 3]>
    iex> Arrays.reduce(lengths, 0, &Kernel.+/2) # `reduce_right` is supported as well.
    36

Concatenating arrays:

    iex> Arrays.new([1, 2, 3]) |> Arrays.concat(Arrays.new([4, 5, 6]))
    #Arrays.Implementations.MapArray<[1, 2, 3, 4, 5, 6]>

Slicing arrays:

    iex> ints = Arrays.new(1..100)
    iex> Arrays.slice(ints, 9..19)
    #Arrays.Implementations.MapArray<[10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20]>

Rationale

Algorithms that use arrays can be used while abstracting away from the underlying representation. Which array implementation/representation is actually used, can then later be configured/compared, to make a trade-off between ease-of-use and time/memory efficiency.

Arrays itself comes with two built-in implementations:

  • Arrays.Implementations.ErlangArray wraps the Erlang :array module, allowing this time-tested implementation to be used with all common Elixir protocols and syntactic sugar.
  • Arrays.Implementations.MapArray is a simple implementation that uses a map with sequential integers as keys.

By default, the MapArray implementation is used when creating new array objects, but this can be configured by either changing the default in your whole application, or by passing an option to a specific invocation of new/0-2, or empty/0-1.

Implementations provided by other libraries:

  • ArraysAja adds support for Aja's A.Vector, which is an implementation of a 'Hickey Trie' vector. For most operations, it significantly outperforms ErlangArray and MapArray.
    iex> words = Arrays.new(["the", "quick", "brown", "fox", "jumps", "over", "the", "lazy", "dog"])
    #Arrays.Implementations.MapArray<["the", "quick", "brown", "fox", "jumps", "over", "the", "lazy", "dog"]>

Protocols

Besides being able to use all functions in the Arrays module, one can use the following protocols and behaviours with them:

  • From Elixir's standard library:

  • Enumerable: Iterating over arrays

  • Collectable: Creating arrays from collections

  • the Access behaviour: access a particular element using square brackets, put_in etc.

  • From common container libraries:

  • Insertable: Append a single item from the end of an array

  • Extractable: Take a single item from the end of an array

  • FunLand.Mappable: Map a function over each element in the array, creating a new array with the results

  • FunLand.Reducible: Reduce an array to a single value.

Note: FunLand is an optional dependency of this library, so its functionality will only be available if :fun_land is also added to your mix.exs dependencies list.

Enumerable

    iex> myarray = Arrays.new([2, 1, 4, 2, 0])
    iex> Enum.sort(myarray)
    [0, 1, 2, 2, 4]
    iex> Enum.count(myarray)
    5
    iex> Enum.with_index(myarray)
    [{2, 0}, {1, 1}, {4, 2}, {2, 3}, {0, 4}]
    iex> Enum.slice(myarray, 1, 3)
    [1, 4, 2]

    iex> names = Arrays.new(["Ernie", "Bert", "Kermit"])
    iex> names |> Stream.map(&String.upcase/1) |> Enum.into(Arrays.new())
    #Arrays.Implementations.MapArray<["ERNIE", "BERT", "KERMIT"]>

    iex> foods = Arrays.new(["Cheese", "Strawberries", "Cookies"])
    iex> foods |> Enum.take(2)
    ["Cheese", "Strawberries"]

Collectable

    iex> [10, 20, 30, 40] |> Enum.into(Arrays.new())
    #Arrays.Implementations.MapArray<[10, 20, 30, 40]>

Access

    iex> arr = Arrays.new([1, 2, 3, 4])
    iex> arr = put_in(arr[2], 33)
    #Arrays.Implementations.MapArray<[1, 2, 33, 4]>
    iex> arr = update_in(arr[1], (&(&1 * -2)))
    #Arrays.Implementations.MapArray<[1, -4, 33, 4]>
    iex> arr = update_in(arr[-1], (&(&1 + 1)))
    #Arrays.Implementations.MapArray<[1, -4, 33, 5]>
    iex> {33, arr} = pop_in(arr[-2])
    iex> arr
    #Arrays.Implementations.MapArray<[1, -4, 5]>
    iex> {1, arr} = pop_in(arr[0])
    iex> arr
    #Arrays.Implementations.MapArray<[-4, 5]>
    iex> {5, arr} = pop_in(arr[-1])
    iex> arr
    #Arrays.Implementations.MapArray<[-4]>

    iex> arr2 = Arrays.new([10, 20, 30])
    iex> {20, arr2} = get_and_update_in(arr2[1], fn _ -> :pop end)
    iex> arr2
    #Arrays.Implementations.MapArray<[10, 30]>

square-bracket access, get_in, put_in and update_in are very fast operations. Unless pop/pop_in is used for the last element in the array, is a very slow operation, as it requires moving of all elements after the given index in the array.

Both positive indexes (counting from zero) and negative indexes (-1 is the last element, -2 the second-to-last element, etc.) are supported.

However, if positive_index > Arrays.size(array) or negative_index < -Arrays.size(array), an ArgumentError is raised:

    iex> arr = Arrays.new([1,2,3,4])
    iex> pop_in(arr[4])
    ** (ArgumentError) argument error

    iex> arr = Arrays.new([1,2,3,4])
    iex> pop_in(arr[-5])
    ** (ArgumentError) argument error

    iex> arr = Arrays.new([1,2,3,4])
    iex> Access.fetch(arr, 4)
    :error
    iex> Access.fetch(arr, -5)
    :error

    iex> arr = Arrays.new([1,2,3,4])
    iex> update_in(arr[8], fn x -> x * 2 end)
    ** (ArgumentError) argument error

    iex> arr = Arrays.new([1,2,3,4])
    iex> update_in(arr[-8], fn x -> x * 2 end)
    ** (ArgumentError) argument error

Insertable

    iex> arr = Arrays.new()
    iex> {:ok, arr} = Insertable.insert(arr, 42)
    iex> {:ok, arr} = Insertable.insert(arr, 100)
    iex> arr
    #Arrays.Implementations.MapArray<[42, 100]>

Extractable

    iex> Extractable.extract(Arrays.new())
    {:error, :empty}
    iex> {:ok, {3, arr}} = Extractable.extract(Arrays.new([1, 2, 3]))
    iex> arr
    #Arrays.Implementations.MapArray<[1, 2]>

FunLand.Reducible

Note: FunLand is an optional dependency of this library.

    iex> Arrays.new([1,2,3,4]) |> FunLand.reduce(0, &(&1+&2))
    10

FunLand.Mappable

    iex> Arrays.new([1, 2, 3, 4]) |> FunLand.Mappable.map(fn x -> x * 2 end)
    #Arrays.Implementations.MapArray<[2, 4, 6, 8]>

Arrays vs Lists

Elixir widely uses List as default collection type. Arrays have the folowing differences:

  • Arrays keep track of their size. The size of a list needs to be computed.
  • Arrays allow fast¹ element indexing. Indexing later elements in a list slows down linearly in the size of the list.
  • Pushing a single element to the end of an array is fast¹. Pushing a single element to the end of a list is very slow, taking linear time.
  • Pushing a single element to the start of an array is slow, taking linear time. Pushing a single element to the head of a list is fast, taking constant time.
  • Appending of arrays takes time proportional to the size of the second array. Appending two lists takes time proportional to the length of the first list. This means that repeated appending
  • Lists are allowed to be improper. Arrays can never be improper.
  • Many common operations in Elixir transform an enumerable into a list automatically. Arrays are made using Arrays.new/0, Arrays.new/1 Arrays.empty/0, the into: option on a for, or Enum.into.

¹: Depending on the implementation, 'fast' is either O(1) (constant time, regardless of array size) or O(log(n)) (logarithmic time, becoming a constant amount slower each time the array doubles in size.)

The linear time many operations on lists take, means that the operation becomes twice as slow when the list doubles in size.

Implementing a new Array type

To add array-functionality to a custom datastructure, you'll need to implement the Arrays.Protocol.

Besides these, you probably want to implement the above-mentioned protocols as well. You can look at the source code of Arrays.CommonProtocolImplementations for some hints as to how those protocols can be easily implemented, as many functions can be defined as simple wrappers on top of the functions that Arrays.Protocol itself already provides.


Changelog

  • 2.0.0 Improves the Arrays.Protocol to be more friendly to implement. Specifically:
    • Remove implementations for Access.pop. Instead, throw an error when people try to use it.
    • Similarly, throw an error when :pop is used inside Access.get_and_update
    • Move empty from Access.Behaviour to Access.Protocol.
    • Alter handling of :default. It is no longer a required setting, and all arrays are able to work with a default passed to resize.
    • Related to above: Replace Arrays.Protocol.resize/2 with Arrays.Protocol.resize/3. (Arrays.resize/2 will call it with nil as third parameter).
    • size is no longer a required setting. Arrays.new/2 and Arrays.empty/1 have been edited to reflect this.
  • 1.2.0 - Adds ErlangArray.from_raw/1 and ErlangArray.to_raw/1 for interop with :array-records created/consumed by other code.
  • 1.1.0 - Improved README and general usage examples. Introduces Arrays.concat/1, Arrays.concat/2, Arrays.slice/2, Arrays.slice/3.
  • 1.0.0 - Stable release. Mayor overhaul, 100% test coverage, 100% documentation.
  • 0.1.0 - Initial version.

Roadmap

  • Add some simple benchmarks
    • Appending a single element
    • Random element access
    • Random element update
    • Concatenate two collections
  • Add from_raw and to_raw functions to ErlangArray to work with pre-existing code that operates on the raw :array record itself.
  • Add more benchmarks:
    • Resizing collection (smaller)
    • Resizing collection (larger)
    • Removing a single element
    • Removing all elements one-by-one until the array is empty
  • Potentially add more helper functionality to Arrays, such as sort, swap, shuffle, split.
  • Look into adding a persistent bit-partitioned vector trie ('Hickey trie') implementation (potentially based on persistent_vector).
  • Look into adding a NIF-based immutable array implementation, such as im-rs's RRB-Vector, where besides being extra performant because of being close to the metal, having access to the reference-count might allow extra optimizations (in-place mutation is possible when you know that there is only one variable referencing the array). This is a bit of a long shot, but it might be very worthwhile. -> This is done. See ArraysRRBVector. Unfortunately, it turned out to not be more performant because of NIF-calling overhead.

Benchmarks

You can run the benchmarks locally by running mix run benchmarks/benchmarks.exs, which will also output the HTML format with nice graphs.

From below benchmarks, we know (caveat emptor):

  • For collections smaller than ~100-200 elements, there is no pronounced difference between using lists and arrays.
  • For collections with more than ~100-200, but fewer than fewer than ~10_000-20_000 elements, ErlangArray is a small constant amount faster than MapArray for updates, and other operations perform similarly.
  • For collections with more than ~10_000-20_000 elements, MapArray is usually a small constant amount faster than ErlangArray.

append append_focus

Appending a single element is very fast on arrays, even as sizes grow. MapArray and ErlangArray perform similarly.

For extra comparison, we look at lists both to see how slow list ++ [val] becomes as baseline, but also how fast [val | list] still is:

In certain situations where a list can be treated as 'backwards', this can be a very simple way to append elements. As doing this is built-in, it will always be faster than our arrays. Thus, it serves as a 'maxline'.

random_read

Accessing a random element is very fast on arrays, even as sizes grow.

Arrays start beating lists significantly once the collection has more than 256 elements.

MapArray and ErlangArray seem to perform similarly < 8192 elements.

For larger sizes, ErlangArray seems to be a factor ~2 slower than MapArray again.

random_update

Arrays start beating lists once the collection has more than 128 elements.

For sizes up to 131072 elements, MapArray seems to be between 100% and 30% slower than ErlangArray. For longer arrays, MapArray wins out, with ErlangArray being ~30% slower.

It seems like put_in has some overhead w.r.t. calling Arrays.replace. This warrants more investigation. Maybe Access has some overhead for its calls, or maybe the implementations of get_and_update_in could be further optimized.

concat concat_focus concat_focus_log

Strangely, concatenation of large collections is very fast on lists. Probably because all of it happens in a single built-in function?

Lists outperform arrays 20x-100x for this task.

Between ErlangArray and MapArray, ErlangArray seems to handle this task 50% faster when concatenating two 4068-element arrays, and twice as fast for larger collections.

About

Well-structured Arrays with fast random-element-access for Elixir, offering a common interface with multiple implementations with varying performance guarantees that can be switched in your configuration.

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • Elixir 91.5%
  • JavaScript 5.6%
  • CSS 2.9%