Lieturd project template

This project template is meant for use by anyone and everyone, it's aim is to promote good practices and make it easy to kick-start a project.

It does some assumptions however:

You want to use Azure DevOps with it (if you haven't tried it before, you should check it out).
You mostly deploy Docker images to Kubernetes
You use Yaml for your Kubernetes configuration
You are comfortable with using Python >=3.6 at least for your tooling
You use Git (though usage with e.g. Mercurial is reasonably easy)
You like using pre-commit for your hooks
You use minikube (but any other local Kubernetes should work fine with minimal changes)
You would like kured to manage the restarting of your Kubernetes nodes automatically
You want to store secrets in encrypted form in your repository using Sealed Secrets

It works especially well for projects where you build Python APIs as the tooling already uses Python. However, you can really build anything else with it as well and this template aims to prove that.

Pre-requisites

Every machine where you run projects based on this, perform builds, releases or similar should likely have the following installed:

To save some effort, you can use the Azure DevOps pipeline agent in this repository's service/pipeline-agent. You'll need to buy the dedicated agent slots on Azure DevOps for it though, so you might want to start with the hosted agents.

If you do use it, configure service/pipeline-agent/kube/01-config.yaml and create the related sealed secrets for it. VSTS_TOKEN needs to be created from Azure DevOps. More information at https://hub.docker.com/_/microsoft-azure-pipelines-vsts-agent

Directory structure, components, and naming

The directory structure should be fairly self-explanatory.

tasks.py - Contains Invoke tasks run via poetry run invoke ...
azure-devops - Contains the Azure DevOps pipeline configurations
devops - Contains the bulk of the DevOps -tooling code
envs - Contains configuration for environments
kube - Basic configuration for all Kubernetes clusters

You will find many commands and configs refer to "components". It is used simply to refer to the path with a Dockerfile and kube/*.yaml that can be used to build and deploy your things to Kubernetes.

The repository contains the example component service/pipeline-agent and the build and release configurations for it.

Naming works as follows:

Components: path/to/component -> {IMAGE_PREFIX}-path-to-component in e.g. Docker repository names. This means that if you configure devops/settings.py with IMAGE_PREFIX = "myproj", then service/pipeline-agent will be built as myproj-service-pipeline-agent and you need to use that name for it in Kubernetes configs and in some pipeline variables.
Kubernetes Deployments etc.: Typically use the last component or last components of the path that are unique, e.g. service/pipeline-agent -> pipeline-agent, or api/user/v1 -> user-v1. Use the same name for Deployment and Service for simplicity.
Pipelines: Build|Release <component name> - unfortunately it seems Azure DevOps does not respect the name property and you have to rename them manually after creation.
Pipeline configs: (build|release)-<component name>.yml

For deleting old Kubernetes resources, you can move your .yaml file under kube/obsolete/ and it will be picked up AFTER the release of the kube/*.yaml files have been applied and the resources will be deleted.

The envs have a few things to keep in mind.

Firstly, every envs/* is expected to be run on one Kubernetes cluster (except minikube), though mostly because of Sealed Secrets keys (in envs/<env>/secrets.pem) and such things not being considered for distribution.

Secondly, you should store the sealed secrets generated with kubeseal to envs/<env>/secrets/<num>-<name>.yaml, e.g. 01-pipeline-agent.yaml and they will be applied during release. Similarly the files in envs/<env>/secrets/obsolete/ will have their resources deleted.

Thirdly, if you need to override any component's kube/ configs, you can store an override to envs/<env>/overrides/component/path/kube/<file>.yaml, e.g. api/test/v1/kube/01-config.yaml could be overridden for staging env by creating envs/staging/overrides/api/test/v1/kube/01-config.yaml with the full replacement contents.

If you want to do purely local settings for devops scripts, e.g. to change the LOG_LEVEL, you can create devops/settings_local.py with your overrides.

Yaml merges

In the envs/<env>/merges/ folder you can put files to merge with your existing configs.

E.g. if you want to just override one field, add one setting, or remove some specific thing, you don't need to replace the whole file. This will help with reducing duplication and thus risking your settings getting out of sync.

To remove previously defined properties, set the value as ~.

To skip items in lists (leave them untouched), just use an empty value as in:

list:
 - # Skipped
 - override

If you need to skip a full YAML document on a multi-document file, make sure the YAML parser understands that. E.g. to skip the first document you will need to do something like:

---
---
# Document 2
spec:
  value: override

Otherwise it should work pretty much as expected. Any items in original file that do not exist in merges, stay untouched. Any new items are added. Any string/number/similar values on both get replaced.

As a specific example, if you have component/kube/01-example.yaml and envs/test/merges/component/kube/01-example.yaml with the contents:

# component/kube/01-example.yaml
apiVersion: v1
kind: ConfigMap
metadata:
  name: myproj-settings
data:
  MY_SETTING: "foo"
---
apiVersion: apps/v1
kind: Deployment
metadata:
  name: my-deployment
spec:
  selector:
    matchLabels:
      app: my-deployment
  template:
    metadata:
      labels:
        app: my-deployment
    spec:
      containers:
        - name: my-container
          imagePullPolicy: IfNotPresent
          image: my-container:latest
          env:
            - name: ANOTHER_SETTING
              value: some-value
          volumeMounts:
            - mountPath: /var/run/docker.sock
              name: docker-volume

and

# envs/test/merges/component/kube/01-example.yaml
data:
  MY_SETTING: "bar"
---
spec:
  template:
    spec:
      containers:
        - env:
            - name: ANOTHER_SETTING # this prop is here just for clarity
              value: another-value
          volumeMounts: ~
          livenessProbe:
            exec:
              command:
               - cat
               - /tmp/healthy
            initialDelaySeconds: 5
            periodSeconds: 5

You will end up afterwards with a processed combination of:

apiVersion: v1
kind: ConfigMap
metadata:
  name: myproj-settings
data:
  MY_SETTING: "bar"
---
apiVersion: apps/v1
kind: Deployment
metadata:
  name: my-deployment
spec:
  selector:
    matchLabels:
      app: my-deployment
  template:
    metadata:
      labels:
        app: my-deployment
    spec:
      containers:
        - name: my-container
          imagePullPolicy: IfNotPresent
          image: my-container:latest
          env:
            - name: ANOTHER_SETTING
              value: another-value
          livenessProbe:
            exec:
              command:
               - cat
               - /tmp/healthy
            initialDelaySeconds: 5
            periodSeconds: 5

Yaml Jinja2 templates

In some cases you might want multiple components in each environment share some settings or variables; the pods might want to know in which environment they are running, a base URL for the whole environment or something similar. If you have multiple components and multiple environments creating merge files or overrides manually can be tedious and error prone.

You can use Jinja2 templates to render merge templates and override templates for components per environment. Place the templates for merge files in path/to/component/kube/merge-templates/ and templates for overrides in path/to/component/kube/override-templates/.

Then define the variables for each environment in envs/<env>/settings.py in the TEMPLATE_VARIABLES dictionary.

The templates will be rendered by the pre-commit hook, but can also be rendered by running poetry run invoke update-from-templates.

The rendering process will add a header to the files and automatically take care of updating and removing files with those headers as needed and leave any manually created overrides or merges alone.

Example: In the envs/minikube/settings.py set:

TEMPLATE_VARIABLES = {
    "env": "minikube"
}

If you have more environments make sure to also add the variable to the settings.py of those environments.

Then create the file service/pipeline-agent/kube/merge-templates/01-config.yaml with the content:

data:
  ENV: "{{ env }}"

When then running poetry run invoke update-from-templates the file envs/minikube/merges/service/pipeline-agent/kube/01-config.yaml will be generated with the following content:

# THIS FILE HAS BEEN AUTOMATICALLY GENERATED BY: poetry run invoke update-from-templates
# GENERATED FROM service/pipeline-agent/kube/merge-templates/01-config.yaml, DO NOT MODIFY THIS FILE BY HAND
#
data:
  ENV: "minikube"

Post-release actions

When you need to e.g. perform database migrations after release, the tooling can help out. In any component directory you can create a file post-release.sh, which will be automatically executed on a random pod after the resources have been restarted.

In practice when e.g. writing database migrations for your Python API you might want that script to run something like:

Taking the template into use

Download the latest release of this repository
Create an Azure DevOps project if you don't have one yet
Maybe remove .travis.yml if you don't want Travis-CI integration to SonarCloud
Update or remove LICENSE.md
Update this file for your needs
Configure devops/settings.py, especially IMAGE_PREFIX
Update kured-config in kube/02-kured.yaml
Create envs/*/settings.py for the environments you wish to manage
Run poetry run invoke init-kubernetes <env> for every relevant Kubectl context (incl. minikube) - keep in mind we assume one cluster per env.
Modify azure-devops/*.yml variables to match your settings
Update azureSubscription in azure-devops/*.yml
Set up necessary Service Connections from Azure DevOps to Azure and configure azure-devops/*.yml accordingly.
Commit the envs/*/secrets.pem -files
Convert any existing secrets with kubeseal using --cert envs/<env>/secrets.pem -arg.
Commit and push all changes to your Azure DevOps project
Enable Multi-stage pipelines from preview features (possibly optional)
Add pipelines from the azure-devops/*.yml -files AND manually configure the automatic post-build triggers as necessary (e.g. to release after master build)
Try to run the pipelines and then "Authorize" them in Azure DevOps or fix missing service connections and such.

Development usage

Every developer checking out the repository should first run

minikube start [--cpus=4] [--memory=4g] [--disk-size=50g]
minikube docker-env
# Follow instructions from output
poetry install
poetry run invoke init

For most projects you should set up ksync or similar, or to run

minikube mount .:/src --ip=$(minikube ip)

These will configure the hooks and minikube environment.

To restart from scratch, just run minikube delete and start again.

Other common commands

# Releasing specific version for specific component
poetry run invoke release <env> \
    --component service/pipeline-agent \
    --image service/pipeline-agent=<name>.azurecr.io/project-service-pipeline-agent \
    --tag service/pipeline-agent=master-994ee2d-20191012-141539

# Build a specific component
poetry run invoke build-images --component service/pipeline-agent

# Pass build args
poetry run invoke build-images --component service/pipeline-agent --docker-arg foo=bar --docker-arg boo=far ...

# Clean up the Azure Container Registry, name is from <name>.azurecr.io
poetry run invoke cleanup-registry <name>

Passing build arguments to docker images

You can pass build arguments to Dockerfile by passing --docker-arg ARG1=argument --docker-arg ARG2=argument to the poetry run invoke build-images command. Remember to define the args in your Dockerfile (ARG ARG1=default_value) to actually use them. This of course means that you can also pass them to docker build --build-arg ARG1=argument

Initializing Azure Kubernetes Service -cluster

For setting up everything to work nearly with this template on AKS, you should run a few commands afterwards.

First, ensure your kubectl context is set correctly (kubectl config get-contexts and kubectl config use-context <ctx>).

If you didn't create the AKS cluster with --attach-acr then you should create a service principal for your AKS cluster to access ACR.

# Set up pull permissions to ACR from this cluster so we don't need
# imagePullSecrets in all kube configs.

# Get the id of the service principal configured for AKS
CLIENT_ID=$(az aks show --resource-group $AKS_RESOURCE_GROUP --name $AKS_CLUSTER_NAME --query "servicePrincipalProfile.clientId" --output tsv)

# Get the ACR registry resource id
ACR_ID=$(az acr show --name $ACR_NAME --resource-group $ACR_RESOURCE_GROUP --query "id" --output tsv)

# Create role assignment
az role assignment create --assignee $CLIENT_ID --role acrpull --scope $ACR_ID

The dashboard typically needs permissions that are not there by default.

# Set up permissions for dashboard
kubectl create clusterrolebinding kubernetes-dashboard -n kube-system --clusterrole=cluster-admin --serviceaccount=kube-system:kubernetes-dashboard

Run the init-kubernetes task:

poetry run invoke init-kubernetes <env>

This will apply the *.yaml files found under the kube directory. By default these include the sealed secrets controller and kured. You should preferably run this task from your local machine, as the task will also fetch the public key for the sealed secrets for the cluster and store it under envs/<env>/secrets.pem and you most likely want to commit that to the repository to make it easy to add new secrets.

If you need to override any of the files from kube/*.yaml for some cluster, you can do that by adding an identically named file in kube/<kube_context>/overrides/*.yaml. The <kube_context> should match the KUBE_CONTEXT value defined in envs/<env>/settings.py. This approach can for example be used to customize the KURED_SLACK_NAME for each cluster by making a cluster/context specific override of the 02-kured.yaml file. You can also add a totally new file in the overrides folder, with no corresponding file in kube/*.yaml, if there's no default version of the file.

Important information

Security of secrets

For the minikube env the scripts will automatically store the master key for Sealed Secrets in the repo, and restore it from there to all dev environments. This is so you can also use Sealed Secrets in dev and not run into problems in other environments.

However this also means that the secrets stored for minikube are NOT SECURE. Do not put any real secrets in them without being fully aware of the consequences.

For all other environments you are expected to store the secrets.pem for each environment in the repository, and the sealed secrets in encrypted form in envs/<env>/secrets/*.yaml.

For example:

# Create a secret, output as yaml to a file and don't run on server
kubectl create secret generic my-secret \
    -o yaml \
    --dry-run \
    --from-literal=foo=bar > my-secret.yaml
kubeseal --cert envs/<env>/secrets.pem < my-secret.yaml > envs/<env>/secrets/01-my-secret.yaml

You might also want to back-up your master key, but do NOT store it in the repository - put it safely away in e.g. your password manager's secure notes -section.

You can export the master key by running:

poetry run invoke get-master-key --env <env>

This will save the key as envs/<env>/master.key. Make sure to NOT under any circumstance commit this file.

Working with SealedSecrets

If you have the master.key file for an environment (or sufficient privileges to retrieve it from the cluster), you can use the following command to unseal the secrets to a readable and editable format:

poetry run invoke unseal-secrets --env <env>

This will convert each of the files in envs/<env>/secrets/*.yaml to a corresponding *.unsealed-secrets.yaml file. This will also base64 decode the file, so you can see and edit the actual values easily.

NOTE: Make sure to not under any circumstance commit the *.unsealed-secrets.yaml or master.key files!

Once you're done editing the files, you can do the reverse operation by running:

poetry run invoke seal-secrets --env <env>

This will base64 encode all the values and then seal the secrets using envs/<env>/secrets.pem.

Note that also unchanged secrets will show up as changed in the SealedSecrets yaml file due to how kubeseal works. This can be mitigated using the --only-changed flag, which requires the master.key (or sufficient privileges to retrieve it from the cluster).

License

The project template is released with the BSD 3-clause license. Some of the tools used might use other licenses. Please see LICENSE.md for more.

While this is not GPL/LGPL/similar, if you improve on the template, especially anything on the TODO, contribution back to the source would be appreciated.

You will likely want to update that file for your own private projects.

Build names

If you choose to use a different build name, you should likely update cleanup_acr_repository in tasks.py and fix _sort_tag for your names.

Questions & Answers

Q: Why do you not use ctx.run for Invoke tasks?

A:

It has been unreliable, especially when you run a large number of small tasks - sometimes just raising UnexpectedExit with no exit code or output at all.

Q: Why do you use Alpine Linux base images?

A:

The minimal distribution makes builds and releases faster, and reduces attack footprint.

Q: Why do you use /bin/sh (or #!/usb/bin/env sh) instead of BASH?

A:

Compatibility with busybox etc., especially Alpine Linux.

Q: How to optimize Dockerfile build speeds?

A:

First, use verdaccio and devpi and such caches hosted locally. Secondly, use pipeline caching. Thirdly, make sure you split your Dockerfile in steps so your commands are:

Set up environment, args, other things that basically never change

Install the build dependencies and other such always required pkgs

Copy the project dependency configuration for npm, poetry etc.

RUN the task to install dependencies based on that configuration

COPY the source files over

RUN any final configuration, incl. deletion of build deps

This way Docker's cache gets invalidated less often.

TODO

Things that could be done better still:

Invoke tasks: Create a dev task that automatically runs various tests, maybe uses e.g. ksync and such.
Azure DevOps: Use of templates
Azure DevOps: Examples of pipeline caching
Azure Key Vault: Examples of Key Vault use for secure storage of secrets
Kubernetes RBAC: Limiting privileges each user has for the non-local environments.
DevSecOps: E.g. automatic security scans of build containers
Automated tests: Good examples for how to run automated tests after components have been built
Env setup tools: Simple tools to deploy a new named environment
Dashboard RBAC: Does it really need that high level of permissions?
Backup: Automated tool to back up important configuration e.g. Sealed Secret master keys
DevOps scripts: Unit tests, probably based on --dry-run mode
Caches: Add examples of usage of Verdaccio and devpi
Azure DevOps: It would be nice to be able to set variables with a form, especially things like the tag for release
Releases: Examples of real functional database migrations using migrate-anything

Name		Name	Last commit message	Last commit date
Latest commit History 65 Commits
azure-devops		azure-devops
devops		devops
envs/minikube		envs/minikube
kube		kube
service/pipeline-agent		service/pipeline-agent
.gitignore		.gitignore
.pre-commit-config.yaml		.pre-commit-config.yaml
.travis.yml		.travis.yml
LICENSE.md		LICENSE.md
README.md		README.md
invoke.yaml		invoke.yaml
poetry.lock		poetry.lock
pyproject.toml		pyproject.toml
sonar-project.properties		sonar-project.properties
tasks.py		tasks.py

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

Lieturd project template

Pre-requisites

Directory structure, components, and naming

Yaml merges

Yaml Jinja2 templates

Post-release actions

Taking the template into use

Development usage

Other common commands

Passing build arguments to docker images

Initializing Azure Kubernetes Service -cluster

Important information

Security of secrets

Working with SealedSecrets

License

Build names

Questions & Answers

TODO

About

Releases

Packages

Languages

License

joakimnordling/project-template

Folders and files

Latest commit

History

Repository files navigation

Lieturd project template

Pre-requisites

Directory structure, components, and naming

Yaml merges

Yaml Jinja2 templates

Post-release actions

Taking the template into use

Development usage

Other common commands

Passing build arguments to docker images

Initializing Azure Kubernetes Service -cluster

Important information

Security of secrets

Working with SealedSecrets

License

Build names

Questions & Answers

TODO

About

Resources

License

Stars

Watchers

Forks

Releases

Packages 0

Languages

Packages