First commit.

.gitignore

@@ -0,0 +1 @@
+*~

EMAC/conf_eth.h

@@ -0,0 +1,96 @@
+ /**
+ * \file
+ *
+ * \brief EMAC (Ethernet MAC) driver for SAM.
+ *
+ * Copyright (c) 2011-2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+
+
+#ifndef CONF_EMAC_H_INCLUDED
+#define CONF_EMAC_H_INCLUDED
+
+#include "Arduino.h"
+
+/** EMAC PHY address */
+#define BOARD_EMAC_PHY_ADDR  2
+/*! EMAC RMII mode */
+#define BOARD_EMAC_MODE_RMII 1
+
+/** Number of buffer for RX */
+#define EMAC_RX_BUFFERS  16
+
+/** Number of buffer for TX */
+#define EMAC_TX_BUFFERS  8
+
+/** MAC PHY operation max retry count */
+#define MAC_PHY_RETRY_MAX 1000000
+
+/** MAC address definition.  The MAC address must be unique on the network. */
+#define ETHERNET_CONF_ETHADDR0                        0xBE
+#define ETHERNET_CONF_ETHADDR1                        0xEF
+#define ETHERNET_CONF_ETHADDR2                        0xDE
+#define ETHERNET_CONF_ETHADDR3                        0xAD
+#define ETHERNET_CONF_ETHADDR4                        0xFE
+#define ETHERNET_CONF_ETHADDR5                        0xED
+
+/** WAN Address: 192.168.0.2 */
+/* The IP address being used. */
+#define ETHERNET_CONF_IPADDR0                         192
+#define ETHERNET_CONF_IPADDR1                         168
+#define ETHERNET_CONF_IPADDR2                         0
+#define ETHERNET_CONF_IPADDR3                         2
+
+/** WAN gateway: 192.168.0.1 */
+/** The gateway address being used. */
+#define ETHERNET_CONF_GATEWAY_ADDR0                   192
+#define ETHERNET_CONF_GATEWAY_ADDR1                   168
+#define ETHERNET_CONF_GATEWAY_ADDR2                   0
+#define ETHERNET_CONF_GATEWAY_ADDR3                   1
+
+/** The network mask being used. */
+#define ETHERNET_CONF_NET_MASK0                       255
+#define ETHERNET_CONF_NET_MASK1                       255
+#define ETHERNET_CONF_NET_MASK2                       255
+#define ETHERNET_CONF_NET_MASK3                       0
+
+/** Ethernet MII/RMII mode */
+#define ETH_PHY_MODE  BOARD_EMAC_MODE_RMII
+
+#endif /* CONF_EMAC_H_INCLUDED */