adi-cm3sd

Flash download utility and simple terminal program for Cortex-M3 based ADuCxxx devices. This tool supports the Analog Devices Serial Download Protocol as described in AN-1160.

Usage

usage: cm3sd.py [-h] [--baudrate BAUD] [--erase] [--write HEX] [--reset]
                [--terminal] [--all HEX]
                DEVICE

Flash download utility and simple terminal program for Cortex-M3 based ADuCxxx
devices.

positional arguments:
  DEVICE                Serial device

optional arguments:
  -h, --help            show this help message and exit
  --baudrate BAUD, -b BAUD
                        Baudrate (default: 115200)

Actions:
  Actions are performed in the order listed below.

  --erase, -e           Bulk erase (default: False)
  --write HEX, -w HEX   Hex file to write (may be repeated) (default: [])
  --reset, -r           Reset and run (default: False)
  --terminal, -t        Interactive terminal (default: False)
  --all HEX, -a HEX     Same as -e -w HEX -r -t (default: None)

Example

$ ./cm3sd.py -a hello-world.hex /dev/serial/by-id/usb-SEGGER_J-Link_000541012345-if00
Hold BOOT and press RESET.
Waiting for bootloader............ ok
Chip: 'ADuCRF101  128 ' revision 'E30'
Bulk erase... ok
File: hello-world.hex (40332 bytes, 0x00000000-0x00009d8f)
Flashing... 40332/40332 ok
Resetting... ok
/dev/serial/by-id/usb-SEGGER_J-Link_000541000394-if00, 115200 baud
^C to exit
----------
Contiki-2.6-1551-g49dcb27682ce started
Using LFOSC for rtimer (34000 Hz)
Rime started with address 2.1.0.0.0.0.0.0
RF channel set to 915000000 Hz
MAC CSMA RDC nullrdc NETWORK Rime
Hello, world
^C
$