locating controller connection help

[farberm]

I have a new Evolution 2 22KW air cooled generator
I cannot identify the controller connection to hook up the serial connection
I took a few pictures and would appreciate any input.
One connection has a black/grey end connector on it (upper left part of picture). Does the grey cap need to be removed and connect into there?

I do not see an accessory port 1 sticker?

• Generator Model: 7043-2 - Evolution 2
• Generator Registers: N/A
• Genmon Version: 1.13.14

[swvalenti194]

Peal off the orange tape on bottom of controller?

[farberm]

Is that a question or are you sure?

…

On Jun 15, 2019, at 1:36 PM, swvalenti194 ***@***.***> wrote: Peal off the orange tape on bottom of controller? — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#274?email_source=notifications&email_token=AD3BWWONRANXM7HKHQ3CAI3P2USBHA5CNFSM4HYPNDYKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGODXY4WRQ#issuecomment-502385478>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AD3BWWL63W5OESU7NN65BSLP2USBHANCNFSM4HYPNDYA>.

[jgyates]

These posts have some pictures of Evo2.0 connections:

#234

#198

#149

[farberm]

thanks

…

On Jun 15, 2019, at 1:38 PM, jgyates ***@***.***> wrote: These posts have some pictures of Evo2.0 connections: #234 <#234> #198 <#198> #149 <#149> — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#274?email_source=notifications&email_token=AD3BWWIZROGFWRKZX3S77QTP2USJBA5CNFSM4HYPNDYKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGODXY4X3A#issuecomment-502385644>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AD3BWWNNIGPJMAED2Q37VKLP2USJBANCNFSM4HYPNDYA>.

[jgyates]

No problem. FYI you can search the issues by the tag "Evolution 2.0" to find all of the posts related to Evolution 2.0.

[swvalenti194]

It looks like red white blue and black next to the orange tape is where it should be. That feeding genlink? Where does it go?

[swvalenti194]

Power. Ground. TX. RX. pinout looks right

[jgyates]

In the links above it shows it going to the built in wifi unit.