Some issues were detected related with the acceleration during load/u…

…nload phase.
jfestrada · Feb 8, 2021 · 4643cbe · 4643cbe
1 parent 343bf54
commit 4643cbe
Showing 1 changed file with 6 additions and 4 deletions.
diff --git a/include/marlin/Configuration_A3ides_2209_MINI_adv.h b/include/marlin/Configuration_A3ides_2209_MINI_adv.h
@@ -1333,17 +1333,19 @@
     #define PAUSE_PARK_RETRACT_FEEDRATE 66 // (mm/s) Initial retract feedrate.
     #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract.
 // This short retract is done immediately, before parking the nozzle.
-    #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 80 // (mm/s) Unload filament feedrate. This can be pretty fast.
-    #define FILAMENT_CHANGE_UNLOAD_ACCEL 1250 // (mm/s^2) Lower acceleration may allow a faster feedrate.
+    #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 50 // (mm/s) Unload filament feedrate. This can be pretty fast.
+    #define FILAMENT_CHANGE_UNLOAD_ACCEL 960 // (mm/s^2) Lower acceleration may allow a faster feedrate.
     #define FILAMENT_CHANGE_UNLOAD_LENGTH 420 // (mm) The length of filament for a complete unload.
 //   For Bowden, the full length of the tube and nozzle.
 //   For direct drive, the full length of the nozzle.
 //   Set to 0 for manual unloading.
     #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 10 // (mm/s) Slow move when starting load.
     #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 40 // (mm) Slow length, to allow time to insert material.
 // 0 to disable start loading and skip to fast load only
-    #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 80 // (mm/s) Load filament feedrate. This can be pretty fast.
-    #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 625 // (mm/s^2) Lower acceleration may allow a faster feedrate.
+//    #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 80 // (mm/s) Load filament feedrate. This can be pretty fast.
+//    #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 625 // (mm/s^2) Lower acceleration may allow a faster feedrate.
+    #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 50 //(mm/s) Load filament feedrate. This can be pretty fast.
+    #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 400 // (mm/s^2) Lower acceleration may allow a faster feedrate.
     #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 320 // (mm) Load length of filament, from extruder gear to nozzle.
 //   For Bowden, the full length of the tube and nozzle.
 //   For direct drive, the full length of the nozzle.