RuuviTag gateway for ESP32.
Firmware for ESP32 to collect measurement data from RuuviTag devices via BLE and send the data to AWS IoT Core using MQTT over a WiFi connection.
This firmware currently supports only RuuviTag data format 5.
Use menuconfig to configure the firmware:
idf.py menuconfig
Put SSL certificates and private key in the ssl directory at the project root:
ssl/client.crt.pem
ssl/client.key.pem
ssl/server.crt.pem
Device address is used for the MQTT topic per default which can be replaced
by a more recognizable device name by adding a line to ethers file.
idf.py build
idf.py -p /dev/ttyUSB0 flash monitor
The log should look like this:
I (7317) ruuvi-gw-mqtt: Device Address: D4:2C:7F:62:4E:63
I (7317) ruuvi-gw-mqtt: Device Name: kitchen
I (7327) ruuvi-gw-mqtt: Temperature: 16.71 C
I (7327) ruuvi-gw-mqtt: Humidity: 44.80 %
I (7337) ruuvi-gw-mqtt: Pressure: 973 hPa
I (7337) ruuvi-gw-mqtt: Acceleration X: -0.016 G
I (7347) ruuvi-gw-mqtt: Acceleration Y: -0.028 G
I (7347) ruuvi-gw-mqtt: Acceleration Z: 1.028 G
I (7357) ruuvi-gw-mqtt: Battery: 2.967 V
I (7357) ruuvi-gw-mqtt: TX Power: 4 dBm
I (7367) ruuvi-gw-mqtt: Moves: 70
I (7367) ruuvi-gw-mqtt: Sequence: 49685
I (7367) ruuvi-gw-mqtt:
I (9427) ruuvi-gw-mqtt: Device Address: FE:5F:48:FB:C6:89
I (9427) ruuvi-gw-mqtt: Device Name: bedroom
I (9427) ruuvi-gw-mqtt: Temperature: 20.42 C
I (9437) ruuvi-gw-mqtt: Humidity: 45.36 %
I (9437) ruuvi-gw-mqtt: Pressure: 973 hPa
I (9447) ruuvi-gw-mqtt: Acceleration X: 0.048 G
I (9447) ruuvi-gw-mqtt: Acceleration Y: 0.012 G
I (9457) ruuvi-gw-mqtt: Acceleration Z: 0.968 G
I (9457) ruuvi-gw-mqtt: Battery: 2.865 V
I (9467) ruuvi-gw-mqtt: TX Power: 4 dBm
I (9467) ruuvi-gw-mqtt: Moves: 211
I (9477) ruuvi-gw-mqtt: Sequence: 56059
MIT License. Copyright (c) 2022 Jari Jokinen. See LICENSE for further details.