consul-alerts

Note: This repository was forked from https://github.com/AcalephStorage/consul-alerts

consul-alerts

A highly available daemon for sending notifications and reminders based on Consul health checks.

Under the covers, consul-alerts leverages Consul's own leadership election and KV store to provide automatic failover and seamless operation in the case of a consul-alerts node failure and ensures that your notifications are still sent.

consul-alerts provides a high degree of configuration including:

Several built-in Notifiers for distribution of health check alerts, including iLert, email, SNS, PagerDuty, etc.
The ability to create Notification Profiles, sets of Notifiers which will respond to the given alert when a configurable threshold is exceeded
Multiple degrees of customization for Notifiers and Blacklisting of alerts (service, check id or host)

Requirements

Consul 0.4+. Get it here.
Configured GOPATH.

Installation

a. Download latest binary

Latest release are found here

b. Build from source

go get github.com/iLert/consul-alerts
go install

Note: This should install consul-alerts to $GOPATH/bin

c. Pull docker image

docker pull ilert/consul-alerts

Usage

consul-alerts start

By default, this runs the daemon and API at localhost:9000 and connects to the local consul agent (localhost:8500) and default datacenter (dc1). These can be overriden by the following flags:

consul-alerts start \
  --alert-addr=localhost:9000 \
  --consul-addr=localhost:8500 \
  --consul-dc=dc1 \
  --consul-acl-token=""

Once the daemon is running, it can act as a handler for consul watches. At the moment only checks and events are supported.

consul watch -type checks consul-alerts watch checks --alert-addr=localhost:9000
consul watch -type event consul-alerts watch event --alert-addr=localhost:9000

or run the watchers on the agent the daemon connects by adding the following flags during consul-alerts run:

consul-alerts start --watch-events --watch-checks

Usage - Docker

There are a few options for running in docker.

First option is using the consul agent built into the container. This option requires overriding the default entry point and running an exec to launch consul alerts.

Start consul:

docker run -ti \
  --rm -p 9000:9000 \
  --hostname consul-alerts \
  --name consul-alerts \
  --entrypoint=/bin/consul \
  ilert/consul-alerts \
  agent -data-dir /data -server -bootstrap -client=0.0.0.0

Then in a separate terminal start consul-alerts:

docker exec -ti consul-alerts /bin/consul-alerts start --alert-addr=0.0.0.0:9000 --log-level=info --watch-events --watch-checks

The second option is to link to an existing consul container through docker networking and --link option. This method can more easily share the consul instance with other containers such as vault.

First launch consul container:

docker run \
  -p 8400:8400 \
  -p 8500:8500 \
  -p 8600:53/udp \
  --hostname consul \
  --name consul \
  progrium/consul \
  -server -bootstrap -ui-dir /ui

Then run consul alerts container:

docker run -ti \
  -p 9000:9000 \
  --hostname consul-alerts \
  --name consul-alerts \
  --link consul:consul \
  ilert/consul-alerts start \
  --consul-addr=consul:8500 \
  --log-level=info --watch-events --watch-checks

Last option is to launch the container and point at a remote consul instance:

docker run -ti \
  -p 9000:9000 \
  --hostname consul-alerts \
  --name consul-alerts \
  ilert/consul-alerts start \
  --consul-addr=remote-consul-server.domain.tdl:8500 \
  --log-level=info --watch-events --watch-checks

NOTE: Don't change --alert-addr when using the docker container.

Usage - HCP consul

The iLert integration in consul alerts also supports connecting to a hashicorp consul cloud instance. As an example, the following command runs a docker with a consul alert instance and an already configured HCP consul instance:

docker run -ti \
  -p 9000:9000 \
  --hostname consul-alerts \
  --name consul-alerts \
  ilert/consul-alerts start \
  --consul-addr=consul-cluster.consul.XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX.aws.hashicorp.cloud \
  --consul-scheme=https \
  --consul-dc=consul-cluster --consul-acl-token=your acl token --log-level=debug --watch-events --watch-checks

NOTE: '--consul-scheme' has to be set to 'https' to work with HCP consul.

Configuration

To assure consistency between instances, configuration is stored in Consul's KV with the prefix: consul-alerts/config/. consul-alerts works out of the box without any customizations by using the defaults documented below and leverages the KV settings as overrides.

A few suggestions on operating and bootstrapping your consul-alerts configuration via the KV store are located in the Operations section below.

If ACLs are enabled the following policy should be configured for consul-alerts token:

key "consul-alerts" {
  policy = "write"
}

service "" {
  policy = "read"
}

event "" {
  policy = "read"
}

session "" {
  policy = "write"
}

Health Checks

Health checking is enabled by default and is at the core what consul-alerts provides. The Health Check functionality is responsible for triggering a notification when the given consul check has changed status. To prevent flapping, notifications are only sent when a check status has been consistent for a specific time in seconds (60 by default). The threshold can be set globally or for a particular node, check, service and/or all of them.

Configuration Options: The default Health Check configuration can be customized by setting kv with the prefix: consul-alerts/config/checks/

key	description
enabled	Globally enable the Health Check functionality. [Default: true]
change-threshold	The time, in seconds, that a check must be in a given status before an alert is sent [Default: 60]
single/{{ node }}/{{ serviceID }}/{{ checkID }}/change-threshold	Overrides `change-threshold` for a specific check associated with a particular service running on a particular node
check/{{ checkID }}/change-threshold	Overrides `change-threshold` for a specific check
service/{{ serviceID }}/change-threshold	Overrides `change-threshold` for a specific service
node/{{ node }}/change-threshold	Overrides `change-threshold` for a specific node

When change-threshold is overridden multiple times, the most specific condition will be used based on the following order: (most specific) single > check > service > node > global settings > default settings (least specific).

Notification Profiles

Notification Profiles allow the operator the ability to customize how often and to which Notifiers alerts will be sent via the Interval and NotifList attributes described below.

Profiles are configured as keys with the prefix: consul-alerts/config/notif-profiles/.

Notification Profile Specification

Key: The name of the Notification Profile

Ex. emailer_only would be located at consul-alerts/config/notif-profiles/emailer_only

Value: A JSON object adhering to the schema shown below.

{
  "$schema": "http://json-schema.org/draft-04/schema#",
  "type": "object",
  "title": "Notifier Profile Schema.",
  "description": "Defines a given Notifier Profile's configuration",
  "properties": {
    "Interval": {
      "type": "integer",
      "title": "Reminder Interval.",
      "description": "Defines the Interval (in minutes) which Reminders should be sent to the given Notifiers.  Should be a multiple of 5."
    },
    "NotifList": {
      "type": "object",
      "title": "Hash of Notifiers to configure.",
      "description": "A listing of Notifier names with a boolean value indicating if it should be enabled or not.",
      "patternProperties": {
        ".{1,}": { "type": "string" }
      }
    },
    "VarOverrides": {
      "type": "object",
      "title": "Hash of Notifier variables to override.",
      "description": "A listing of Notifier names with hash values containing the parameters to be overridden",
      "patternProperties": {
        ".{1,}": { "type": "object" }
      }
    }
  },
  "required": ["Interval", "NotifList"]
}

Notification Profile Examples

Notification Profile to only send Emails with reminders every 10 minutes:

Key: consul-alerts/config/notif-profiles/emailer_only

Value:

{
  "Interval": 10,
  "NotifList": {
    "log": false,
    "email": true
  }
}

NOTE: While it is completely valid to explicitly disable a Notifier in a Notifier Profile, it is not necessary. In the event that a Notification Profile is used, only Notifiers which are explicitly defined and enabled will be used. In the example above then, we could have omitted the "log": false in the NotifList and achieved the same results.

Example - Notification Profile to only send to PagerDuty but never send reminders:

Key: consul-alerts/config/notif-profiles/pagerduty_no_reminders

Value:

{
  "Interval": 0,
  "NotifList": {
    "pagerduty": true
  }
}

NOTE: The Interval being set to 0 disables Reminders from being sent for a given alert. If the service stays in a critical status for an extended period, only that first notification will be sent.

Example - Notification Profile to only send Emails to the overridden receivers:

Key: consul-alerts/config/notif-profiles/emailer_overridden

Value:

{
  "Interval": 10,
  "NotifList": {
    "email": true
  },
  "VarOverrides": {
    "email": {
      "receivers": ["my-team@company.com"]
    }
  }
}

Example - Notification Profile to disable Slack:

Key: consul-alerts/config/notif-profiles/slack_off

Value:

{
  "Interval": 0,
  "NotifList": {
    "slack": false
  }
}

Notification Profile Activation

It is possible to activate Notification Profiles in 2 ways - for a specific entity or for a set of entities matching a regular expression. For a specific item the selection is done by setting keys in consul-alerts/config/notif-selection/services/, consul-alerts/config/notif-selection/checks/, consul-alerts/config/notif-selection/hosts/, or consul-alerts/config/notif-selection/status/, with the appropriate service, check, or host name as the key and the desired Notification Profile name as the value. To activate a Notification Profile for a set of entities matching a regular expression, create a json map of type regexp->notification-profile as a value for the keys consul-alerts/config/notif-selection/services, consul-alerts/config/notif-selection/checks, consul-alerts/config/notif-selection/hosts, or consul-alerts/config/notif-selection/status.

Example - Notification Profile activated for all the services which names start with infra-

Key: consul-alerts/config/notif-selection/services

Value:

{
  "^infra-.*$": "infra-support-profile"
}

Example - Disable slack notifications when status is passing-

Key: consul-alerts/config/notif-selection/status/passing

Value: slack_off

In addition to the service, check and host specific Notification Profiles, the operator can setup a default Notification Profile by creating a Notification Profile kv consul-alerts/config/notif-profiles/default, which acts as a fallback in the event a specific Notification Profile is not found. If there are no Notification Profiles matching the criteria, consul-alerts will send the notification to the full list of enabled Notifiers and no reminders will be sent.

As consul-alerts attempts to process a given notification, it has a series of lookups it does to associate an event with a given Notification Profile by matching on:

Service
Check
Host
Status
Default

NOTE: An event will only trigger notification for the FIRST Notification Profile that meets it's criteria.

Reminders resend the notifications at programmable intervals until they are resolved or added to the blacklist. Reminders are processed every five minutes therefore Interval values should be a multiple of five. If the Interval value is 0 or not set then reminders will not be sent.

Enable/Disable Specific Health Checks

There are multiple ways to enable/disable health check notifications: mark them by node, serviceID, checkID, regular expression, or mark individually by node/serviceID/checkID. This is done by adding a KV entry in consul-alerts/config/checks/blacklist/.... Removing the entry will re-enable the check notifications.

Disable all notification by node

Add a KV entry with the key consul-alerts/config/checks/blacklist/nodes/{{ nodeName }}. This will disable notifications for the specified nodeName.

Disable all notifications for the nodes matching regular expressions

Add a KV entry with the key consul-alerts/config/checks/blacklist/nodes and the value containing a list of regular expressions. This will disable notifications for all the nodes, which names match at least one of the regular expressions.

Disable all notification by service

Add a KV entry with the key consul-alerts/config/checks/blacklist/services/{{ serviceId }}. This will disable notifications for the specified serviceId.

Disable all notifications for the services matching regular expressions

Add a KV entry with the key consul-alerts/config/checks/blacklist/services and the value containing a list of regular expressions. This will disable notifications for all the services, which names match at least one of the regular expressions.

Disable all notification by healthCheck

Add a KV entry with the key consul-alerts/config/checks/blacklist/checks/{{ checkId }}. This will disable notifications for the specified checkId.

Disable all notifications for the healthChecks matching regular expressions

Add a KV entry with the key consul-alerts/config/checks/blacklist/checks and the value containing a list of regular expressions. This will disable notifications for all the healthchecks, which names match at least one of the regular expressions.

Disable a single health check

Add a KV entry with the key consul-alerts/config/checks/blacklist/single/{{ node }}/{{ serviceId }}/{{ checkId }}. This will disable the specific health check. If the health check is not associated with a service, use the _ as the serviceId.

Events

Event handling is enabled by default. This delegates any consul event received by the agent to the list of handlers configured. To disable event handling, set consul-alerts/config/events/enabled to false.

Handlers can be configured by adding them to consul-alerts/config/events/handlers. This should be a JSON array of string. Each string should point to any executable. The event data should be read from stdin.

Notifiers

There are several built-in notifiers. Only the Log notifier is enabled by default. Details on enabling and configuration these are documented for each Notifier.

Custom Notifiers

It is also possible to add custom notifiers similar to custom event handlers. Custom notifiers can be added as keys with command path string values in consul-alerts/config/notifiers/custom/. The keys will be used as notifier names in the profiles.

Logger

This logs any health check notification to a file. To disable this notifier, set consul-alerts/config/notifiers/log/enabled to false.

The log file is set to /tmp/consul-notifications.log by default. This can be changed by changing consul-alerts/config/notifiers/log/path.

Email

This emails the health notifications. To enable this, set consul-alerts/config/notifiers/email/enabled to true.

The email and smtp details needs to be configured:

prefix: consul-alerts/config/notifiers/email/

key	description
enabled	Enable the email notifier. [Default: false]
cluster-name	The name of the cluster. [Default: "Consul Alerts"]
url	The SMTP server url
port	The SMTP server port
username	The SMTP username
password	The SMTP password
sender-alias	The sender alias. [Default: "Consul Alerts"]
sender-email	The sender email
receivers	The emails of the receivers. JSON array of string
template	Path to custom email template. [Default: internal template]
one-per-alert	Whether to send one email per alert [Default: false]
one-per-node	Whether to send one email per node [Default: false] (overriden by one-per-alert)

The template can be any go html template. An TemplateData instance will be passed to the template.

iLert

To enable iLert built-in notifier, set consul-alerts/config/notifiers/ilert/enabled to true. Service API key needs to be configured.

prefix: consul-alerts/config/notifiers/ilert/

key	description
enabled	Enable the iLert notifier. [Default: false]
api-key	The API key of the alert source. (mandatory)
incident-key-template	Format of the incident key. [Default: `{{.Node}}:{{.Service}}:{{.Check}}`

InfluxDB

This sends the notifications as series points in influxdb. Set consul-alerts/config/notifiers/influxdb/enabled to true to enabled. InfluxDB details need to be set too.

prefix: consul-alerts/config/notifiers/influxdb/

key	description
enabled	Enable the influxdb notifier. [Default: false]
host	The influxdb host. (eg. localhost:8086)
username	The influxdb username
password	The influxdb password
database	The influxdb database name
series-name	The series name for the points

Slack

Slack integration is also supported. To enable, set consul-alerts/config/notifiers/slack/enabled to true. Slack details needs to be configured.

prefix: consul-alerts/config/notifiers/slack/

key	description
enabled	Enable the Slack notifier. [Default: false]
cluster-name	The name of the cluster. [Default: `Consul Alerts`]
url	The incoming-webhook url (mandatory) [eg: `https://hooks.slack.com...`]
channel	The channel to post the notification (mandatory) [eg: `#consul-alerts` or `@consul-alerts`]
username	The username to appear on the post [eg: `Consul Alerts`]
icon-url	URL of a custom image for the notification [eg: `http://someimage.com/someimage.png`]
icon-emoji	Emoji (if not using icon-url) for the notification [eg: `:ghost:`]
detailed	Enable "pretty" Slack notifications [Default: false]

In order to enable slack integration, you have to create a new Incoming WebHooks. Then use the token created by the previous action.

Mattermost

Mattermost integration is also supported. To enable, set consul-alerts/config/notifiers/mattermost/enabled to true. Mattermost details needs to be configured.

prefix: consul-alerts/config/notifiers/mattermost/

key	description
enabled	Enable the Mattermost notifier. [Default: false]
cluster-name	The name of the cluster. [Default: "Consul Alerts"]
url	The mattermost url (mandatory)
username	The mattermost username (mandatory)
password	The mattermost password (mandatory)
team	The mattermost team (mandatory)
channel	The channel to post the notification (mandatory)

Notifications can also be sent to Incoming Webhooks. To enable, set consul-alerts/config/notifiers/mattermost-webhook/enabled to true and set consul-alerts/config/notifiers/mattermost-webhook/url to URL of the webhook created on the previous step.

prefix: consul-alerts/config/notifiers/mattermost-webhook/

key	description
enabled	Enable the Mattermost Webhook notifier. [Default: false]
cluster-name	The name of the cluster. [Default: `Consul Alerts`]
url	The incoming-webhook url (mandatory) [eg: `https://mattermost.com/hooks/...`]
channel	The channel to post the notification (mandatory) [eg: `consul-alerts`]
username	The username to appear on the post [eg: `Consul Alerts`]
icon-url	URL of a custom image for the notification [eg: `http://someimage.com/someimage.png`]

PagerDuty

To enable PagerDuty built-in notifier, set consul-alerts/config/notifiers/pagerduty/enabled to true. This is disabled by default. Service key and client details also needs to be configured.

prefix: consul-alerts/config/notifiers/pagerduty/

key	description
enabled	Enable the PagerDuty notifier. [Default: false]
service-key	Service key to access PagerDuty
client-name	The monitoring client name
client-url	The monitoring client url
max-retry	The upper limit of retries on failure. [Default: `0` for no retries]
retry-base-interval	The base delay in seconds before a retry. [Default: `30` seconds ]

HipChat

To enable HipChat built-in notifier, set consul-alerts/config/notifiers/hipchat/enabled to true. Hipchat details needs to be configured.

prefix: consul-alerts/config/notifiers/hipchat/

key	description
enabled	Enable the HipChat notifier. [Default: false]
from	The name to send notifications as (optional)
cluster-name	The name of the cluster. [Default: "Consul Alerts"]
base-url	HipChat base url [Default: `https://api.hipchat.com/v2/`]
room-id	The room to post to (mandatory)
auth-token	Authentication token (mandatory)

The auth-token needs to be a room notification token for the room-id being posted to. See HipChat API docs.

The default base-url works for HipChat-hosted rooms. You only need to override it if you are running your own server.

OpsGenie

To enable OpsGenie built-in notifier, set consul-alerts/config/notifiers/opsgenie/enabled to true. OpsGenie details needs to be configured.

prefix: consul-alerts/config/notifiers/opsgenie/

key	description
enabled	Enable the OpsGenie notifier. [Default: false]
cluster-name	The name of the cluster. [Default: "Consul Alerts"]
api-key	API Key (mandatory)

Amazon Web Services Simple Notification Service ("SNS")

To enable AWS SNS built-in notifier, set consul-alerts/config/notifiers/awssns/enabled to true. AWS SNS details needs to be configured.

prefix: consul-alerts/config/notifiers/awssns/

key	description
enabled	Enable the AWS SNS notifier. [Default: false]
cluster-name	The name of the cluster. [Default: "Consul Alerts"]
region	AWS Region (mandatory)
topic-arn	Topic ARN to publish to. (mandatory)
template	Path to custom template. [Default: internal template]

VictorOps

To enable the VictorOps built-in notifier, set consul-alerts/config/notifiers/victorops/enabled to true. VictorOps details needs to be configured.

prefix: consul-alerts/config/notifiers/victorops/

key	description
enabled	Enable the VictorOps notifier. [Default: false]
api-key	API Key (mandatory)
routing-key	Routing Key (mandatory)

HTTP Endpoint

To enable the HTTP endpoint built-in notifier, set consul-alerts/config/notifiers/http-endpoint/enabled to true. HTTP endpoint details needs to be configured.

prefix: consul-alerts/config/notifiers/http-endpoint/

key	description
enabled	Enable the http-endpoint notifier. [Default: false]
cluster-name	The name of the cluster. [Default: "Consul Alerts"]
base-url	Base URL of the HTTP endpoint (mandatory)
endpoint	The endpoint to append to the end of base-url
payload	The payload to send to the HTTP endpoint (mandatory)

The value of 'payload' must be a json map of type string. Value will be rendered as a template.

{
  "message": "{{ range $name, $checks := .Nodes }}{{ range $check := $checks }}{{ $name }}:{{$check.Service}}:{{$check.Check}} is {{$check.Status}}.{{ end }}{{ end }}"
}

Health Check via API

Health status can also be queried via the API. This can be used for compatibility with nagios, sensu, or other monitoring tools. To get the status of a specific check, use the following entrypoint.

http://consul-alerts:9000/v1/health?node=<node>&service=<serviceId>&check=<checkId>

This will return the output of the check and the following HTTP codes:

Status	Code
passing	200
warning	503
critical	503
unknown	404

http://consul-alerts:9000/v1/health/wildcard?node=<node>&service=<serviceId>&check=<checkId>&status=<status>&alwaysOk=true&ignoreBlacklist=true v1/health/wildcard is similar to v1/health but returns all matched checks (omitted service/node/check params assumed as any) . Values returned in JSON form, status code 503 if one of services in critical state.

Additional params are ignoreBlacklist and alwaysOk which forces status code to 200 regardless of checks status.

Operations

Configuration may be set manually through consul UI or API, using configuration management tools such as chef, puppet or Ansible, or backed up and restored using consulate.

Consulate Example:

consulate kv backup consul-alerts/config -f consul-alerts-config.json
consulate kv restore consul-alerts/config -f consul-alerts-config.json --prune

Contribution

PRs are more than welcome. Just fork, create a feature branch, and open a PR. We love PRs. :)

Name		Name	Last commit message	Last commit date
Latest commit History 251 Commits
.github/workflows		.github/workflows
consul		consul
delve		delve
notifier		notifier
provision		provision
.gitignore		.gitignore
CODE_OF_CONDUCT.md		CODE_OF_CONDUCT.md
CONTRIBUTING.md		CONTRIBUTING.md
Dockerfile		Dockerfile
LICENSE		LICENSE
Makefile		Makefile
README.md		README.md
Vagrantfile		Vagrantfile
check-handler.go		check-handler.go
consul-alerts.go		consul-alerts.go
docker-compose.yaml		docker-compose.yaml
event-handler.go		event-handler.go
go.mod		go.mod
go.sum		go.sum
health-handler.go		health-handler.go
health-wildcard-handler.go		health-wildcard-handler.go
leader-election.go		leader-election.go
send-notifs.go		send-notifs.go
watchers.go		watchers.go

License

iLert/consul-alerts

Folders and files

Latest commit

History

Repository files navigation

consul-alerts

Requirements

Installation

a. Download latest binary

b. Build from source

c. Pull docker image

Usage

Usage - Docker

Usage - HCP consul

Configuration

Health Checks

Notification Profiles

Notification Profile Specification

Notification Profile Examples

Notification Profile Activation

Enable/Disable Specific Health Checks

Disable all notification by node

Disable all notifications for the nodes matching regular expressions

Disable all notification by service

Disable all notifications for the services matching regular expressions

Disable all notification by healthCheck

Disable all notifications for the healthChecks matching regular expressions

Disable a single health check

Events

Notifiers

Custom Notifiers

Logger

Email

iLert

InfluxDB

Slack

Mattermost

PagerDuty

HipChat

OpsGenie

Amazon Web Services Simple Notification Service ("SNS")

VictorOps

HTTP Endpoint

Health Check via API

Operations

Contribution

About

Resources

License

Code of conduct

Stars

Watchers

Forks

Releases 4

Packages 0

Languages

Packages