Add DFU Class per Version 1.1 Spec

examples/device/dfu/CMakeLists.txt

@@ -0,0 +1,37 @@
+# use directory name for project id
+get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME)
+set(PROJECT ${BOARD}-${PROJECT})
+
+# TOP is absolute path to root directory of TinyUSB git repo
+set(TOP "../../..")
+get_filename_component(TOP "${TOP}" REALPATH)
+
+# Check for -DFAMILY=
+if(FAMILY STREQUAL "rp2040")
+  cmake_minimum_required(VERSION 3.12)
+
+  include(${TOP}/hw/bsp/${FAMILY}/pico_sdk_import.cmake)
+  project(${PROJECT})
+  add_executable(${PROJECT})
+
+  include(${TOP}/hw/bsp/${FAMILY}/family.cmake)
+
+  # Example source
+  target_sources(${PROJECT} PUBLIC
+    ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
+    ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
+  )
+
+  # Example include
+  target_include_directories(${PROJECT} PUBLIC
+    ${CMAKE_CURRENT_SOURCE_DIR}/src
+  )
+
+  # Example defines
+  target_compile_definitions(${PROJECT} PUBLIC
+    CFG_TUSB_OS=OPT_OS_PICO
+  )
+
+else()
+  message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}")
+endif()

examples/device/dfu/Makefile

@@ -0,0 +1,12 @@
+include ../../../tools/top.mk
+include ../../make.mk
+
+INC += \
+	src \
+	$(TOP)/hw \
+
+# Example source
+EXAMPLE_SOURCE += $(wildcard src/*.c)
+SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
+
+include ../../rules.mk

examples/device/dfu/src/main.c

@@ -0,0 +1,187 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+ /*
+  * After device is enumerated in dfu mode run the following commands
+  *
+  * To transfer firmware from host to device:
+  *
+  * $ dfu-util -D [filename]
+  *
+  * To transfer firmware from device to host:
+  *
+  * $ dfu-util -U [filename]
+  *
+  */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+
+#include "bsp/board.h"
+#include "tusb.h"
+
+
+//--------------------------------------------------------------------+
+// MACRO CONSTANT TYPEDEF PROTYPES
+//--------------------------------------------------------------------+
+#ifndef DFU_VERBOSE
+#define DFU_VERBOSE 0
+#endif
+
+/* Blink pattern
+ * - 1000 ms : device should reboot
+ * - 250 ms  : device not mounted
+ * - 1000 ms : device mounted
+ * - 2500 ms : device is suspended
+ */
+enum  {
+  BLINK_DFU_MODE = 100,
+  BLINK_NOT_MOUNTED = 250,
+  BLINK_MOUNTED = 1000,
+  BLINK_SUSPENDED = 2500,
+};
+
+static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED;
+
+void led_blinking_task(void);
+
+/*------------- MAIN -------------*/
+int main(void)
+{
+  board_init();
+
+  tusb_init();
+
+  while (1)
+  {
+    tud_task(); // tinyusb device task
+    led_blinking_task();
+  }
+
+  return 0;
+}
+
+//--------------------------------------------------------------------+
+// Device callbacks
+//--------------------------------------------------------------------+
+
+// Invoked when device is mounted
+void tud_mount_cb(void)
+{
+  blink_interval_ms = BLINK_MOUNTED;
+}
+
+// Invoked when device is unmounted
+void tud_umount_cb(void)
+{
+  blink_interval_ms = BLINK_NOT_MOUNTED;
+}
+
+// Invoked when usb bus is suspended
+// remote_wakeup_en : if host allow us  to perform remote wakeup
+// Within 7ms, device must draw an average of current less than 2.5 mA from bus
+void tud_suspend_cb(bool remote_wakeup_en)
+{
+  (void) remote_wakeup_en;
+  blink_interval_ms = BLINK_SUSPENDED;
+}
+
+// Invoked when usb bus is resumed
+void tud_resume_cb(void)
+{
+  blink_interval_ms = BLINK_MOUNTED;
+}
+
+// Invoked on DFU_DETACH request to reboot to the bootloader
+void tud_dfu_runtime_reboot_to_dfu_cb(void)
+{
+  blink_interval_ms = BLINK_DFU_MODE;
+}
+
+//--------------------------------------------------------------------+
+// Class callbacks
+//--------------------------------------------------------------------+
+bool tud_dfu_firmware_valid_check_cb(void)
+{
+  printf("    Firmware check\r\n");
+  return true;
+}
+
+void tud_dfu_req_dnload_data_cb(uint16_t wBlockNum, uint8_t* data, uint16_t length)
+{
+  (void) data;
+  printf("    Received BlockNum %u of length %u\r\n", wBlockNum, length);
+
+#if DFU_VERBOSE
+  for(uint16_t i=0; i<length; i++)
+  {
+    printf("    [%u][%u]: %x\r\n", wBlockNum, i, (uint8_t)data[i]);
+  }
+#endif
+
+  tud_dfu_dnload_complete();
+}
+
+bool tud_dfu_device_data_done_check_cb(void)
+{
+  printf("    Host said no more data... Returning true\r\n");
+  return true;
+}
+
+void tud_dfu_abort_cb(void)
+{
+  printf("    Host aborted transfer\r\n");
+}
+
+#define UPLOAD_SIZE (29)
+const uint8_t upload_test[UPLOAD_SIZE] = "Hello world from TinyUSB DFU!";
+
+uint16_t tud_dfu_req_upload_data_cb(uint16_t block_num, uint8_t* data, uint16_t length)
+{
+  (void) block_num;
+  (void) length;
+
+  memcpy(data, upload_test, UPLOAD_SIZE);
+
+  return UPLOAD_SIZE;
+}
+
+//--------------------------------------------------------------------+
+// BLINKING TASK + Indicator pulse
+//--------------------------------------------------------------------+
+
+void led_blinking_task(void)
+{
+  static uint32_t start_ms = 0;
+  static bool led_state = false;
+
+  // Blink every interval ms
+  if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time
+  start_ms += blink_interval_ms;
+
+  board_led_write(led_state);
+  led_state = 1 - led_state; // toggle
+}

examples/device/dfu/src/tusb_config.h

@@ -0,0 +1,90 @@
+/*
+ * tusb_config.h
+ *
+ *  Created on: May 5, 2021
+ *      Author: Jeremiah McCarthy
+ */
+
+#ifndef TUSB_CONFIG_H_
+#define TUSB_CONFIG_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+//--------------------------------------------------------------------
+// COMMON CONFIGURATION
+//--------------------------------------------------------------------
+
+// defined by board.mk
+#ifndef CFG_TUSB_MCU
+  #error CFG_TUSB_MCU must be defined
+#endif
+
+// RHPort number used for device can be defined by board.mk, default to port 0
+#ifndef BOARD_DEVICE_RHPORT_NUM
+  #define BOARD_DEVICE_RHPORT_NUM     0
+#endif
+
+// RHPort max operational speed can defined by board.mk
+// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+#ifndef BOARD_DEVICE_RHPORT_SPEED
+  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
+       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56)
+    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
+  #else
+    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
+  #endif
+#endif
+
+// Device mode with rhport and speed defined by board.mk
+#if   BOARD_DEVICE_RHPORT_NUM == 0
+  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
+#elif BOARD_DEVICE_RHPORT_NUM == 1
+  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
+#else
+  #error "Incorrect RHPort configuration"
+#endif
+
+#ifndef CFG_TUSB_OS
+#define CFG_TUSB_OS               OPT_OS_NONE
+#endif
+
+// CFG_TUSB_DEBUG is defined by compiler in DEBUG build
+// #define CFG_TUSB_DEBUG           0
+
+/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
+ * Tinyusb use follows macros to declare transferring memory so that they can be put
+ * into those specific section.
+ * e.g
+ * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
+ * - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
+ */
+#ifndef CFG_TUSB_MEM_SECTION
+#define CFG_TUSB_MEM_SECTION
+#endif
+
+#ifndef CFG_TUSB_MEM_ALIGN
+#define CFG_TUSB_MEM_ALIGN          __attribute__ ((aligned(4)))
+#endif
+
+//--------------------------------------------------------------------
+// DEVICE CONFIGURATION
+//--------------------------------------------------------------------
+
+#ifndef CFG_TUD_ENDPOINT0_SIZE
+#define CFG_TUD_ENDPOINT0_SIZE    64
+#endif
+
+#define CFG_TUD_DFU_TRANSFER_BUFFER_SIZE    4096
+
+//------------- CLASS -------------//
+
+#define CFG_TUD_DFU_RUNTIME 0
+#define CFG_TUD_DFU_MODE    1
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* TUSB_CONFIG_H_ */