Skip to content

Commit

Permalink
Fixed restarts
Browse files Browse the repository at this point in the history 
- finally solved frequent restarts if rx-read fails occur --> RC was unhandled read-requests due to passive mode.
- added 5 minute down-timer. Seems to be triggered if burner starts for heating (not for warm-water)
- added additional memory alignment directives (still not know, if really necessary)
- combined telegram (0x73, 0x78, 0x01/0x07) will be dropped, if crc-error in one of them. No problem for now, because 0x73/0x78 are unknown)
  • Loading branch information
@harrymayr
harrymayr committed Dec 29, 2022
1 parent e9c5149 commit b640132
Show file tree
Hide file tree
Showing 6 changed files with 112 additions and 72 deletions.
31 changes: 26 additions & 5 deletions src/devices/boiler.cpp
View file
Original file line number Diff line number Diff line change
Expand Up @@ -99,7 +99,7 @@ Boiler::Boiler(uint8_t device_type, int8_t device_id, uint8_t product_id, const
register_telegram_type(0xA8, F("IRTGetWwTemp"), false, [&](std::shared_ptr<const Telegram> t) { process_IRTGetWwTemp(t); });
register_telegram_type(0xAA, F("IRTGetBurnerRuntime"), false, [&](std::shared_ptr<const Telegram> t) { process_IRTGetBurnerRuntime(t); });
register_telegram_type(0xAB, F("IRTGetBurnerStarts"), false, [&](std::shared_ptr<const Telegram> t) { process_IRTGetBurnerStarts(t); });
register_telegram_type(0xC9, F("IRTHandlerUnknownFunktion"), false, [&](std::shared_ptr<const Telegram> t) { process_IRTHandlerUnknownFunktion(t); });
register_telegram_type(0xC9, F("IRTGetMinuteTimer"), false, [&](std::shared_ptr<const Telegram> t) { process_IRTGetMinuteTimer(t); });
register_telegram_type(0xDE, F("IRTGetMaxBurnerPowerSetting"), false, [&](std::shared_ptr<const Telegram> t) { process_IRTGetMaxBurnerPowerSetting(t); });
register_telegram_type(0xE8, F("IRTHandlerUnknownFunktion"), false, [&](std::shared_ptr<const Telegram> t) { process_IRTHandlerUnknownFunktion(t); });
register_telegram_type(0xED, F("IRTHandlerUnknownFunktion"), false, [&](std::shared_ptr<const Telegram> t) { process_IRTHandlerUnknownFunktion(t); });
Expand Down Expand Up @@ -243,6 +243,13 @@ void Boiler::register_mqtt_ha_config() {
if (Helpers::hasValue(burnWorkMin_)) {
Mqtt::register_mqtt_ha_sensor(nullptr, nullptr, F_(burnWorkMin), device_type(), "burnWorkMin", F_(min), nullptr);
}
if (Helpers::hasValue(minuteTimer_)) {
Mqtt::register_mqtt_ha_sensor(nullptr, nullptr, F_(minuteTimer), device_type(), "minuteTimer", F_(min), F_(iconclockout));
}
if (Helpers::hasValue(emsesp::System::gasReading_)) {
Mqtt::register_mqtt_ha_sensor(nullptr, F_(mqtt_suffix_ww), F_(gasReading), device_type(), "gasReading", F_(meter3), F_(icongasmeter));
}

}
else if (mqtt_ha_config_ == 2) {
// values should be sent if hasValues checks to false, but I see MQTT messages for non iRT sensors, so avoid sending it by tx-Mode
Expand Down Expand Up @@ -366,7 +373,6 @@ void Boiler::register_mqtt_ha_config_ww() {
if (Helpers::hasValue(wWActive_)) {
Mqtt::register_mqtt_ha_sensor(nullptr, F_(mqtt_suffix_ww), F_(wWActive), device_type(), "wWActive", nullptr, nullptr);
}
Mqtt::register_mqtt_ha_sensor(nullptr, F_(mqtt_suffix_ww), F_(gasReading), device_type(), "gasReading", nullptr, nullptr);
}
else if (mqtt_ha_config_ww_ == 1) {
// values should be sent if hasValues checks to false, but I see MQTT messages for non iRT sensors, so avoid sending it by tx-Mode
Expand Down Expand Up @@ -485,6 +491,8 @@ void Boiler::device_info_web(JsonArray & root, uint8_t & part) {
create_value_json(root, F("heatWorkMin"), nullptr, F_(heatWorkMin), nullptr, json);
create_value_json(root, F("UBAuptime"), nullptr, F_(UBAuptime), nullptr, json);
// optional in info
create_value_json(root, F("minuteTimer"), nullptr, F_(minuteTimer), F_(min), json);
create_value_json(root, F("gasReading"), nullptr, F_(gasReading), F_(meter3), json);
create_value_json(root, F("maintenanceMessage"), nullptr, F_(maintenanceMessage), nullptr, json);
create_value_json(root, F("maintenance"), nullptr, F_(maintenance), (maintenanceType_ == 1) ? F_(hours) : nullptr, json);
} else if (part == 1) {
Expand Down Expand Up @@ -518,7 +526,6 @@ void Boiler::device_info_web(JsonArray & root, uint8_t & part) {
create_value_json(root, F("wWSetPumpPower"), nullptr, F_(wWSetPumpPower), F_(percent), json);
create_value_json(root, F("wWStarts"), nullptr, F_(wWStarts), nullptr, json);
create_value_json(root, F("wWWorkM"), nullptr, F_(wWWorkM), nullptr, json);
create_value_json(root, F("gasReading"), nullptr, F_(gasReading), F_(meter3), json);
} else if (part == 2) {
part = 0; // no more parts
if (!export_values_info(json, true)) { // append info values
Expand Down Expand Up @@ -678,8 +685,6 @@ bool Boiler::export_values_ww(JsonObject & json, const bool textformat) {
json["wWMaxPower"] = wWMaxPower_;
}

json["gasReading"] = (float)emsesp::System::gasReading_/emsesp::System::convFactor_/4.0;

// Warm Water active time
Helpers::json_time(json, "wWWorkM", wWWorkM_, textformat);

Expand Down Expand Up @@ -854,6 +859,16 @@ bool Boiler::export_values_main(JsonObject & json, const bool textformat) {
// Total UBA working time
Helpers::json_time(json, "UBAuptime", UBAuptime_, textformat);

// minute timer
if (Helpers::hasValue(minuteTimer_)) {
json["minuteTimer"] = minuteTimer_;
}

// gas meter reading
if (Helpers::hasValue(emsesp::System::gasReading_)) {
json["gasReading"] = (float)emsesp::System::gasReading_/emsesp::System::convFactor_/4.0;
}

/*
// Service Code & Service Code Number. Priority error - maintenance - workingcode
if ((serviceCode_[0] >= '1' && serviceCode_[0] <= '9') || (serviceCode_[0] >= 'A' && serviceCode_[0] <= 'Z')) {
Expand Down Expand Up @@ -1341,6 +1356,12 @@ void Boiler::process_IRTGetBurnerStarts(std::shared_ptr<const Telegram> telegram
{
changed_ |= telegram->read_value(burnStarts_, 4);
}

void Boiler::process_IRTGetMinuteTimer(std::shared_ptr<const Telegram> telegram) // 0xC9
{
changed_ |= telegram->read_value(minuteTimer_, 4);
}

void Boiler::process_IRTGetMaxBurnerPowerSetting(std::shared_ptr<const Telegram> telegram) // 0xDE
{
changed_ |= telegram->read_value(burnMaxPower_raw, 4);
Expand Down
96 changes: 50 additions & 46 deletions src/devices/boiler.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -70,11 +70,13 @@ class Boiler : public EMSdevice {
static constexpr uint8_t EMS_TYPE_UBAParameters = 0x16;
static constexpr uint8_t EMS_TYPE_UBAParametersPlus = 0xE6;
static constexpr uint8_t EMS_TYPE_UBAParameterWWPlus = 0xEA;
static constexpr uint16_t EMS_TYPE_UBAInfomration = 0x495;
static constexpr uint16_t EMS_TYPE_UBAEnergySupplied = 0x494;
static constexpr uint16_t EMS_TYPE_UBAInfomration __attribute__ ((aligned (4))) = 0x495;
static constexpr uint16_t EMS_TYPE_UBAEnergySupplied __attribute__ ((aligned (4))) = 0x494;

static constexpr uint8_t EMS_BOILER_SELFLOWTEMP_HEATING = 20; // was originally 70, changed to 30 for issue #193, then to 20 with issue #344


// iRT specific?
uint8_t minuteTimer_ = EMS_VALUE_UINT_NOTSET; // 5 minute timer
// UBAParameterWW
uint8_t wWActivated_ = EMS_VALUE_BOOL_NOTSET; // Warm Water activated
uint8_t wWActivated_raw = EMS_VALUE_BOOL_NOTSET; // Warm Water activated
Expand All @@ -86,16 +88,21 @@ class Boiler : public EMSdevice {
uint8_t wWComfort_ = EMS_VALUE_UINT_NOTSET; // WW comfort mode

// MC10Status
uint16_t mixerTemp_ = EMS_VALUE_USHORT_NOTSET; // mixer temperature
uint16_t tankMiddleTemp_ = EMS_VALUE_USHORT_NOTSET; // tank middle temperature (TS3)
uint16_t mixerTemp_ __attribute__ ((aligned (4))) = EMS_VALUE_USHORT_NOTSET; // mixer temperature
uint16_t tankMiddleTemp_ __attribute__ ((aligned (4))) = EMS_VALUE_USHORT_NOTSET; // tank middle temperature (TS3)

// UBAMonitorFast - 0x18 on EMS1
uint16_t curFlowTemp_ __attribute__ ((aligned (4))) = EMS_VALUE_USHORT_NOTSET; // Current flow temperature
uint16_t wWStorageTemp1_ __attribute__ ((aligned (4))) = EMS_VALUE_USHORT_NOTSET; // warm water storage temp 1
uint16_t wWStorageTemp2_ __attribute__ ((aligned (4))) = EMS_VALUE_USHORT_NOTSET; // warm water storage temp 2
uint16_t retTemp_ __attribute__ ((aligned (4))) = EMS_VALUE_USHORT_NOTSET; // Return temperature
uint16_t flameCurr_ __attribute__ ((aligned (4))) = EMS_VALUE_USHORT_NOTSET; // Flame current in micro amps
uint16_t serviceCodeNumber_ __attribute__ ((aligned (4))) = EMS_VALUE_USHORT_NOTSET; // error/service code
uint32_t lastCodeDate_ __attribute__ ((aligned (4))) = 0;
char serviceCode_[4] = {'\0'}; // 3 character status/service code
char lastCode_[30] = {'\0'};
uint8_t selFlowTemp_ = EMS_VALUE_UINT_NOTSET; // Selected flow temperature
uint16_t curFlowTemp_ = EMS_VALUE_USHORT_NOTSET; // Current flow temperature
uint8_t curFlowTemp_raw = EMS_VALUE_UINT_NOTSET; // Current flow temperature
uint16_t wWStorageTemp1_ = EMS_VALUE_USHORT_NOTSET; // warm water storage temp 1
uint16_t wWStorageTemp2_ = EMS_VALUE_USHORT_NOTSET; // warm water storage temp 2
uint16_t retTemp_ = EMS_VALUE_USHORT_NOTSET; // Return temperature
uint8_t retTemp_raw = EMS_VALUE_UINT_NOTSET; // Return temperature
uint8_t burnGas_ = EMS_VALUE_BOOL_NOTSET; // Gas on/off
uint8_t fanWork_ = EMS_VALUE_BOOL_NOTSET; // Fan on/off
Expand All @@ -106,34 +113,29 @@ class Boiler : public EMSdevice {
uint8_t selBurnPow_ = EMS_VALUE_UINT_NOTSET; // Burner max power %
uint8_t curBurnPow_ = EMS_VALUE_UINT_NOTSET; // Burner current power %
uint8_t curBurnPow_raw = EMS_VALUE_UINT_NOTSET; // Burner current power %
uint16_t flameCurr_ = EMS_VALUE_USHORT_NOTSET; // Flame current in micro amps
uint8_t sysPress_ = EMS_VALUE_UINT_NOTSET; // System pressure
char serviceCode_[4] = {'\0'}; // 3 character status/service code
uint16_t serviceCodeNumber_ = EMS_VALUE_USHORT_NOTSET; // error/service code
uint8_t serviceCodeNumber_raw = EMS_VALUE_UINT_NOTSET; // error/service code
uint8_t boilerState_ = EMS_VALUE_UINT_NOTSET; // Boiler state flag
char lastCode_[30] = {'\0'};
uint32_t lastCodeDate_ = 0;

// UBAMonitorSlow - 0x19 on EMS1
int16_t outdoorTemp_ = EMS_VALUE_SHORT_NOTSET; // Outside temperature
int16_t outdoorTemp_ __attribute__ ((aligned (4))) = EMS_VALUE_SHORT_NOTSET; // Outside temperature
uint16_t boilTemp_ __attribute__ ((aligned (4))) = EMS_VALUE_USHORT_NOTSET; // Boiler temperature
uint16_t exhaustTemp_ __attribute__ ((aligned (4))) = EMS_VALUE_USHORT_NOTSET; // Exhaust temperature
uint32_t burnStarts_ __attribute__ ((aligned (4))) = EMS_VALUE_ULONG_NOTSET; // # burner restarts
uint32_t burnWorkMin_ __attribute__ ((aligned (4))) = EMS_VALUE_ULONG_NOTSET; // Total burner operating time
uint32_t heatWorkMin_ __attribute__ ((aligned (4))) = EMS_VALUE_ULONG_NOTSET; // Total heat operating time
uint16_t switchTemp_ __attribute__ ((aligned (4))) = EMS_VALUE_USHORT_NOTSET; // Switch temperature
uint8_t outdoorTemp_raw = EMS_VALUE_UINT_NOTSET; // Outside temperature
uint16_t boilTemp_ = EMS_VALUE_USHORT_NOTSET; // Boiler temperature
uint16_t exhaustTemp_ = EMS_VALUE_USHORT_NOTSET; // Exhaust temperature
uint8_t heatingPumpMod_ = EMS_VALUE_UINT_NOTSET; // Heating pump modulation %
uint32_t burnStarts_ = EMS_VALUE_ULONG_NOTSET; // # burner restarts
uint32_t burnWorkMin_ = EMS_VALUE_ULONG_NOTSET; // Total burner operating time
uint8_t burnWorkMin_raw = EMS_VALUE_UINT_NOTSET; // Total burner operating time
uint32_t heatWorkMin_ = EMS_VALUE_ULONG_NOTSET; // Total heat operating time
uint16_t switchTemp_ = EMS_VALUE_USHORT_NOTSET; // Switch temperature

// UBAMonitorWW
uint8_t wWSetTemp_ = EMS_VALUE_UINT_NOTSET; // Warm Water set temperature
uint16_t wWCurTemp_ = EMS_VALUE_USHORT_NOTSET; // Warm Water current temperature
uint16_t wWCurTemp_ __attribute__ ((aligned (4))) = EMS_VALUE_USHORT_NOTSET; // Warm Water current temperature
uint16_t wWCurTemp2_ __attribute__ ((aligned (4))) = EMS_VALUE_USHORT_NOTSET; // Warm Water current temperature storage
uint32_t wWStarts_ __attribute__ ((aligned (4))) = EMS_VALUE_ULONG_NOTSET; // Warm Water # starts
uint32_t wWWorkM_ __attribute__ ((aligned (4))) = EMS_VALUE_ULONG_NOTSET; // Warm Water # minutes
uint8_t wWCurTemp_raw = EMS_VALUE_UINT_NOTSET; // Warm Water current temperature
uint16_t wWCurTemp2_ = EMS_VALUE_USHORT_NOTSET; // Warm Water current temperature storage
uint32_t wWStarts_ = EMS_VALUE_ULONG_NOTSET; // Warm Water # starts
uint32_t wWWorkM_ = EMS_VALUE_ULONG_NOTSET; // Warm Water # minutes
uint8_t wWOneTime_ = EMS_VALUE_BOOL_NOTSET; // Warm Water one time function on/off
uint8_t wWDisinfecting_ = EMS_VALUE_BOOL_NOTSET; // Warm Water disinfection on/off
uint8_t wWCharging_ = EMS_VALUE_BOOL_NOTSET; // Warm Water charging on/off
Expand All @@ -145,7 +147,7 @@ class Boiler : public EMSdevice {
uint8_t wWMaxPower_ = EMS_VALUE_UINT_NOTSET; // Warm Water maximum power

// UBATotalUptime
uint32_t UBAuptime_ = EMS_VALUE_ULONG_NOTSET; // Total UBA working hours
uint32_t UBAuptime_ __attribute__ ((aligned (4))) = EMS_VALUE_ULONG_NOTSET; // Total UBA working hours

// UBAParameters
uint8_t heatingActivated_ = EMS_VALUE_BOOL_NOTSET; // Heating activated on the boiler
Expand Down Expand Up @@ -174,33 +176,33 @@ class Boiler : public EMSdevice {
uint8_t heatingPump2Mod_ = EMS_VALUE_UINT_NOTSET; // heating pump 2 modulation from 0xE3 (heating pumps)

// UBAInformation
uint32_t upTimeControl_ = EMS_VALUE_ULONG_NOTSET; // Operating time control
uint32_t upTimeCompHeating_ = EMS_VALUE_ULONG_NOTSET; // Operating time compressor heating
uint32_t upTimeCompCooling_ = EMS_VALUE_ULONG_NOTSET; // Operating time compressor cooling
uint32_t upTimeCompWw_ = EMS_VALUE_ULONG_NOTSET; // Operating time compressor warm water
uint32_t heatingStarts_ = EMS_VALUE_ULONG_NOTSET; // Heating starts (control)
uint32_t coolingStarts_ = EMS_VALUE_ULONG_NOTSET; // Cooling starts (control)
uint32_t wWStarts2_ = EMS_VALUE_ULONG_NOTSET; // Warm water starts (control)
uint32_t nrgConsTotal_ = EMS_VALUE_ULONG_NOTSET; // Energy consumption total
uint32_t auxElecHeatNrgConsTotal_ = EMS_VALUE_ULONG_NOTSET; // Auxiliary electrical heater energy consumption total
uint32_t auxElecHeatNrgConsHeating_ = EMS_VALUE_ULONG_NOTSET; // Auxiliary electrical heater energy consumption heating
uint32_t auxElecHeatNrgConsDHW_ = EMS_VALUE_ULONG_NOTSET; // Auxiliary electrical heater energ consumption DHW
uint32_t nrgConsCompTotal_ = EMS_VALUE_ULONG_NOTSET; // Energy consumption compressor total
uint32_t nrgConsCompHeating_ = EMS_VALUE_ULONG_NOTSET; // Energy consumption compressor heating
uint32_t nrgConsCompWw_ = EMS_VALUE_ULONG_NOTSET; // Energy consumption compressor warm water
uint32_t nrgConsCompCooling_ = EMS_VALUE_ULONG_NOTSET; // Energy consumption compressor cooling
uint32_t upTimeControl_ __attribute__ ((aligned (4))) = EMS_VALUE_ULONG_NOTSET; // Operating time control
uint32_t upTimeCompHeating_ __attribute__ ((aligned (4))) = EMS_VALUE_ULONG_NOTSET; // Operating time compressor heating
uint32_t upTimeCompCooling_ __attribute__ ((aligned (4))) = EMS_VALUE_ULONG_NOTSET; // Operating time compressor cooling
uint32_t upTimeCompWw_ __attribute__ ((aligned (4))) = EMS_VALUE_ULONG_NOTSET; // Operating time compressor warm water
uint32_t heatingStarts_ __attribute__ ((aligned (4))) = EMS_VALUE_ULONG_NOTSET; // Heating starts (control)
uint32_t coolingStarts_ __attribute__ ((aligned (4))) = EMS_VALUE_ULONG_NOTSET; // Cooling starts (control)
uint32_t wWStarts2_ __attribute__ ((aligned (4))) = EMS_VALUE_ULONG_NOTSET; // Warm water starts (control)
uint32_t nrgConsTotal_ __attribute__ ((aligned (4))) = EMS_VALUE_ULONG_NOTSET; // Energy consumption total
uint32_t auxElecHeatNrgConsTotal_ __attribute__ ((aligned (4))) = EMS_VALUE_ULONG_NOTSET; // Auxiliary electrical heater energy consumption total
uint32_t auxElecHeatNrgConsHeating_ __attribute__ ((aligned (4))) = EMS_VALUE_ULONG_NOTSET; // Auxiliary electrical heater energy consumption heating
uint32_t auxElecHeatNrgConsDHW_ __attribute__ ((aligned (4))) = EMS_VALUE_ULONG_NOTSET; // Auxiliary electrical heater energ consumption DHW
uint32_t nrgConsCompTotal_ __attribute__ ((aligned (4))) = EMS_VALUE_ULONG_NOTSET; // Energy consumption compressor total
uint32_t nrgConsCompHeating_ __attribute__ ((aligned (4))) = EMS_VALUE_ULONG_NOTSET; // Energy consumption compressor heating
uint32_t nrgConsCompWw_ __attribute__ ((aligned (4))) = EMS_VALUE_ULONG_NOTSET; // Energy consumption compressor warm water
uint32_t nrgConsCompCooling_ __attribute__ ((aligned (4))) = EMS_VALUE_ULONG_NOTSET; // Energy consumption compressor cooling

// UBAEnergySupplied
uint32_t nrgSuppTotal_ = EMS_VALUE_ULONG_NOTSET; // Energy supplied total
uint32_t nrgSuppHeating_ = EMS_VALUE_ULONG_NOTSET; // Energy supplied heating
uint32_t nrgSuppWw_ = EMS_VALUE_ULONG_NOTSET; // Energy supplied warm water
uint32_t nrgSuppCooling_ = EMS_VALUE_ULONG_NOTSET; // Energy supplied cooling
uint32_t nrgSuppTotal_ __attribute__ ((aligned (4))) = EMS_VALUE_ULONG_NOTSET; // Energy supplied total
uint32_t nrgSuppHeating_ __attribute__ ((aligned (4))) = EMS_VALUE_ULONG_NOTSET; // Energy supplied heating
uint32_t nrgSuppWw_ __attribute__ ((aligned (4))) = EMS_VALUE_ULONG_NOTSET; // Energy supplied warm water
uint32_t nrgSuppCooling_ __attribute__ ((aligned (4))) = EMS_VALUE_ULONG_NOTSET; // Energy supplied cooling

// _UBAMaintenanceData
uint8_t maintenanceMessage_ = EMS_VALUE_UINT_NOTSET;
uint8_t maintenanceType_ = EMS_VALUE_UINT_NOTSET;
uint8_t maintenanceTime_ = EMS_VALUE_UINT_NOTSET;
char maintenanceDate_[12] = {'\0'};
char maintenanceDate_[12] __attribute__ ((aligned (4))) = {'\0'};

void process_UBAParameterWW(std::shared_ptr<const Telegram> telegram);
void process_UBAMonitorFast(std::shared_ptr<const Telegram> telegram);
Expand Down Expand Up @@ -244,6 +246,8 @@ class Boiler : public EMSdevice {
void process_IRTGetBurnerStarts(std::shared_ptr<const Telegram> telegram); // 0xAB
void process_IRTGetMaxBurnerPowerSetting(std::shared_ptr<const Telegram> telegram); // 0xDE
void process_IRTHandlerUnknownFunktion(std::shared_ptr<const Telegram> telegram); // unknown funktions
void process_IRTGetMinuteTimer(std::shared_ptr<const Telegram> telegram); // 0xC9


// commands - none of these use the additional id parameter
bool set_warmwater_mode(const char * value, const int8_t id);
Expand Down
3 changes: 2 additions & 1 deletion src/locale_EN.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -229,6 +229,7 @@ MAKE_PSTR(heatWorkMin, "Heating active time")
MAKE_PSTR(UBAuptime, "Boiler total uptime")
MAKE_PSTR(wWMaxPower, "Warm water max power")
MAKE_PSTR(gasReading, "Gas meter reading")
MAKE_PSTR(minuteTimer, "5 minute down-timer")

MAKE_PSTR(upTimeControl, "Operating time control")
MAKE_PSTR(upTimeCompHeating, "Operating time compressor heating")
Expand Down Expand Up @@ -362,7 +363,7 @@ MAKE_PSTR(iconthermostat, "mdi:home-thermometer-outline")
MAKE_PSTR(iconpump, "mdi:pump")
MAKE_PSTR(iconwifi, "mdi:wifi")
MAKE_PSTR(iconcounter, "mdi:counter")
MAKE_PSTR(iconlockout, "mdi:clock-outline")
MAKE_PSTR(iconclockout, "mdi:clock-outline")
MAKE_PSTR(iconmemory, "mdi:memory")
MAKE_PSTR(icongasmeter, "mdi:meter-gas-outline")

Expand Down
Loading

0 comments on commit b640132

Please sign in to comment.