Merge tag 'acpi-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kerne…

…l/git/rafael/linux-pm

Pull ACPI updates from Rafael Wysocki:
 "These add support for generic initiator-only proximity domains to the
  ACPI NUMA code and the architectures using it, clean up some
  non-ACPICA code referring to debug facilities from ACPICA, reduce the
  overhead related to accessing GPE registers, add a new DPTF (Dynamic
  Power and Thermal Framework) participant driver, update the ACPICA
  code in the kernel to upstream revision 20200925, add a new ACPI
  backlight whitelist entry, fix a few assorted issues and clean up some
  code.

  Specifics:

   - Add support for generic initiator-only proximity domains to the
     ACPI NUMA code and the architectures using it (Jonathan Cameron)

   - Clean up some non-ACPICA code referring to debug facilities from
     ACPICA that are not actually used in there (Hanjun Guo)

   - Add new DPTF driver for the PCH FIVR participant (Srinivas
     Pandruvada)

   - Reduce overhead related to accessing GPE registers in ACPICA and
     the OS interface layer and make it possible to access GPE registers
     using logical addresses if they are memory-mapped (Rafael Wysocki)

   - Update the ACPICA code in the kernel to upstream revision 20200925
     including changes as follows:
      + Add predefined names from the SMBus sepcification (Bob Moore)
      + Update acpi_help UUID list (Bob Moore)
      + Return exceptions for string-to-integer conversions in iASL (Bob
        Moore)
      + Add a new "ALL <NameSeg>" debugger command (Bob Moore)
      + Add support for 64 bit risc-v compilation (Colin Ian King)
      + Do assorted cleanups (Bob Moore, Colin Ian King, Randy Dunlap)

   - Add new ACPI backlight whitelist entry for HP 635 Notebook (Alex
     Hung)

   - Move TPS68470 OpRegion driver to drivers/acpi/pmic/ and split out
     Kconfig and Makefile specific for ACPI PMIC (Andy Shevchenko)

   - Clean up the ACPI SoC driver for AMD SoCs (Hanjun Guo)

   - Add missing config_item_put() to fix refcount leak (Hanjun Guo)

   - Drop lefrover field from struct acpi_memory_device (Hanjun Guo)

   - Make the ACPI extlog driver check for RDMSR failures (Ben
     Hutchings)

   - Fix handling of lid state changes in the ACPI button driver when
     input device is closed (Dmitry Torokhov)

   - Fix several assorted build issues (Barnabás Pőcze, John Garry,
     Nathan Chancellor, Tian Tao)

   - Drop unused inline functions and reduce code duplication by using
     kobj_to_dev() in the NFIT parsing code (YueHaibing, Wang Qing)

   - Serialize tools/power/acpi Makefile (Thomas Renninger)"

* tag 'acpi-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits)
  ACPICA: Update version to 20200925 Version 20200925
  ACPICA: Remove unnecessary semicolon
  ACPICA: Debugger: Add a new command: "ALL <NameSeg>"
  ACPICA: iASL: Return exceptions for string-to-integer conversions
  ACPICA: acpi_help: Update UUID list
  ACPICA: Add predefined names found in the SMBus sepcification
  ACPICA: Tree-wide: fix various typos and spelling mistakes
  ACPICA: Drop the repeated word "an" in a comment
  ACPICA: Add support for 64 bit risc-v compilation
  ACPI: button: fix handling lid state changes when input device closed
  tools/power/acpi: Serialize Makefile
  ACPI: scan: Replace ACPI_DEBUG_PRINT() with pr_debug()
  ACPI: memhotplug: Remove 'state' from struct acpi_memory_device
  ACPI / extlog: Check for RDMSR failure
  ACPI: Make acpi_evaluate_dsm() prototype consistent
  docs: mm: numaperf.rst Add brief description for access class 1.
  node: Add access1 class to represent CPU to memory characteristics
  ACPI: HMAT: Fix handling of changes from ACPI 6.2 to ACPI 6.3
  ACPI: Let ACPI know we support Generic Initiator Affinity Structures
  x86: Support Generic Initiator only proximity domains
  ...

Documentation/ABI/testing/sysfs-platform-dptf

@@ -92,3 +92,19 @@ Contact:	linux-acpi@vger.kernel.org
 Description:
 		(RO) The battery discharge current capability obtained from battery fuel gauge in
 		milli Amps.
+
+What:		/sys/bus/platform/devices/INTC1045:00/pch_fivr_switch_frequency/freq_mhz_low_clock
+Date:		November, 2020
+KernelVersion:	v5.10
+Contact:	linux-acpi@vger.kernel.org
+Description:
+		(RW) The PCH FIVR (Fully Integrated Voltage Regulator) switching frequency in MHz,
+		when FIVR clock is 19.2MHz or 24MHz.
+
+What:		/sys/bus/platform/devices/INTC1045:00/pch_fivr_switch_frequency/freq_mhz_high_clock
+Date:		November, 2020
+KernelVersion:	v5.10
+Contact:	linux-acpi@vger.kernel.org
+Description:
+		(RW) The PCH FIVR (Fully Integrated Voltage Regulator) switching frequency in MHz,
+		when FIVR clock is 38.4MHz.

Documentation/admin-guide/mm/numaperf.rst

@@ -56,6 +56,11 @@ nodes' access characteristics share the same performance relative to other
 linked initiator nodes. Each target within an initiator's access class,
 though, do not necessarily perform the same as each other.
 
+The access class "1" is used to allow differentiation between initiators
+that are CPUs and hence suitable for generic task scheduling, and
+IO initiators such as GPUs and NICs.  Unlike access class 0, only
+nodes containing CPUs are considered.
+
 ================
 NUMA Performance
 ================
@@ -88,6 +93,9 @@ The latency attributes are provided in nanoseconds.
 The values reported here correspond to the rated latency and bandwidth
 for the platform.
 
+Access class 1 takes the same form but only includes values for CPU to
+memory activity.
+
 ==========
 NUMA Cache
 ==========

MAINTAINERS

@@ -405,7 +405,7 @@ F:	drivers/platform/x86/i2c-multi-instantiate.c
 ACPI PMIC DRIVERS
 M:	"Rafael J. Wysocki" <rjw@rjwysocki.net>
 M:	Len Brown <lenb@kernel.org>
-R:	Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+R:	Andy Shevchenko <andy@kernel.org>
 R:	Mika Westerberg <mika.westerberg@linux.intel.com>
 L:	linux-acpi@vger.kernel.org
 S:	Supported
@@ -8953,7 +8953,7 @@ F:	drivers/gpio/gpio-*cove.c
 F:	drivers/gpio/gpio-msic.c
 
 INTEL PMIC MULTIFUNCTION DEVICE DRIVERS
-R:	Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+M:	Andy Shevchenko <andy@kernel.org>
 S:	Maintained
 F:	drivers/mfd/intel_msic.c
 F:	drivers/mfd/intel_soc_pmic*

arch/x86/include/asm/numa.h

@@ -63,12 +63,14 @@ extern void numa_clear_node(int cpu);
 extern void __init init_cpu_to_node(void);
 extern void numa_add_cpu(int cpu);
 extern void numa_remove_cpu(int cpu);
+extern void init_gi_nodes(void);
 #else	/* CONFIG_NUMA */
 static inline void numa_set_node(int cpu, int node)	{ }
 static inline void numa_clear_node(int cpu)		{ }
 static inline void init_cpu_to_node(void)		{ }
 static inline void numa_add_cpu(int cpu)		{ }
 static inline void numa_remove_cpu(int cpu)		{ }
+static inline void init_gi_nodes(void)			{ }
 #endif	/* CONFIG_NUMA */
 
 #ifdef CONFIG_DEBUG_PER_CPU_MAPS

arch/x86/kernel/setup.c

@@ -1199,6 +1199,7 @@ void __init setup_arch(char **cmdline_p)
 	prefill_possible_map();
 
 	init_cpu_to_node();
+	init_gi_nodes();
 
 	io_apic_init_mappings();
 

arch/x86/mm/numa.c

@@ -745,6 +745,27 @@ static void __init init_memory_less_node(int nid)
 	 */
 }
 
+/*
+ * A node may exist which has one or more Generic Initiators but no CPUs and no
+ * memory.
+ *
+ * This function must be called after init_cpu_to_node(), to ensure that any
+ * memoryless CPU nodes have already been brought online, and before the
+ * node_data[nid] is needed for zone list setup in build_all_zonelists().
+ *
+ * When this function is called, any nodes containing either memory and/or CPUs
+ * will already be online and there is no need to do anything extra, even if
+ * they also contain one or more Generic Initiators.
+ */
+void __init init_gi_nodes(void)
+{
+	int nid;
+
+	for_each_node_state(nid, N_GENERIC_INITIATOR)
+		if (!node_online(nid))
+			init_memory_less_node(nid);
+}
+
 /*
  * Setup early cpu_to_node.
  *

drivers/acpi/Kconfig

@@ -504,55 +504,6 @@ config ACPI_EXTLOG
 config ACPI_ADXL
 	bool
 
-menuconfig PMIC_OPREGION
-	bool "PMIC (Power Management Integrated Circuit) operation region support"
-	help
-	  Select this option to enable support for ACPI operation
-	  region of the PMIC chip. The operation region can be used
-	  to control power rails and sensor reading/writing on the
-	  PMIC chip.
-
-if PMIC_OPREGION
-config BYTCRC_PMIC_OPREGION
-	bool "ACPI operation region support for Bay Trail Crystal Cove PMIC"
-	depends on INTEL_SOC_PMIC
-	help
-	  This config adds ACPI operation region support for the Bay Trail
-	  version of the Crystal Cove PMIC.
-
-config CHTCRC_PMIC_OPREGION
-	bool "ACPI operation region support for Cherry Trail Crystal Cove PMIC"
-	depends on INTEL_SOC_PMIC
-	help
-	  This config adds ACPI operation region support for the Cherry Trail
-	  version of the Crystal Cove PMIC.
-
-config XPOWER_PMIC_OPREGION
-	bool "ACPI operation region support for XPower AXP288 PMIC"
-	depends on MFD_AXP20X_I2C && IOSF_MBI=y
-	help
-	  This config adds ACPI operation region support for XPower AXP288 PMIC.
-
-config BXT_WC_PMIC_OPREGION
-	bool "ACPI operation region support for BXT WhiskeyCove PMIC"
-	depends on INTEL_SOC_PMIC_BXTWC
-	help
-	  This config adds ACPI operation region support for BXT WhiskeyCove PMIC.
-
-config CHT_WC_PMIC_OPREGION
-	bool "ACPI operation region support for CHT Whiskey Cove PMIC"
-	depends on INTEL_SOC_PMIC_CHTWC
-	help
-	  This config adds ACPI operation region support for CHT Whiskey Cove PMIC.
-
-config CHT_DC_TI_PMIC_OPREGION
-	bool "ACPI operation region support for Dollar Cove TI PMIC"
-	depends on INTEL_SOC_PMIC_CHTDC_TI
-	help
-	  This config adds ACPI operation region support for Dollar Cove TI PMIC.
-
-endif
-
 config ACPI_CONFIGFS
 	tristate "ACPI configfs support"
 	select CONFIGFS_FS
@@ -568,21 +519,7 @@ config ACPI_PPTT
 	bool
 endif
 
-config TPS68470_PMIC_OPREGION
-	bool "ACPI operation region support for TPS68470 PMIC"
-	depends on MFD_TPS68470
-	help
-	  This config adds ACPI operation region support for TI TPS68470 PMIC.
-	  TPS68470 device is an advanced power management unit that powers
-	  a Compact Camera Module (CCM), generates clocks for image sensors,
-	  drives a dual LED for flash and incorporates two LED drivers for
-	  general purpose indicators.
-	  This driver enables ACPI operation region support control voltage
-	  regulators and clocks.
-
-	  This option is a bool as it provides an ACPI operation
-	  region, which must be available before any of the devices
-	  using this, are probed.
+source "drivers/acpi/pmic/Kconfig"
 
 endif	# ACPI
 

drivers/acpi/Makefile

@@ -107,17 +107,9 @@ obj-$(CONFIG_ACPI_APEI)		+= apei/
 
 obj-$(CONFIG_ACPI_EXTLOG)	+= acpi_extlog.o
 
-obj-$(CONFIG_PMIC_OPREGION)	+= pmic/intel_pmic.o
-obj-$(CONFIG_BYTCRC_PMIC_OPREGION) += pmic/intel_pmic_bytcrc.o
-obj-$(CONFIG_CHTCRC_PMIC_OPREGION) += pmic/intel_pmic_chtcrc.o
-obj-$(CONFIG_XPOWER_PMIC_OPREGION) += pmic/intel_pmic_xpower.o
-obj-$(CONFIG_BXT_WC_PMIC_OPREGION) += pmic/intel_pmic_bxtwc.o
-obj-$(CONFIG_CHT_WC_PMIC_OPREGION) += pmic/intel_pmic_chtwc.o
-obj-$(CONFIG_CHT_DC_TI_PMIC_OPREGION) += pmic/intel_pmic_chtdc_ti.o
-
 obj-$(CONFIG_ACPI_CONFIGFS)	+= acpi_configfs.o
 
-obj-$(CONFIG_TPS68470_PMIC_OPREGION)	+= pmic/tps68470_pmic.o
+obj-y				+= pmic/
 
 video-objs			+= acpi_video.o video_detect.o
 obj-y				+= dptf/

drivers/acpi/acpi_apd.c

@@ -7,39 +7,28 @@
  *	Wu, Jeff <Jeff.Wu@amd.com>
  */
 
-#include <linux/clk-provider.h>
-#include <linux/platform_data/clk-fch.h>
-#include <linux/platform_device.h>
-#include <linux/pm_domain.h>
-#include <linux/clkdev.h>
 #include <linux/acpi.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
 #include <linux/err.h>
 #include <linux/io.h>
-#include <linux/pm.h>
+#include <linux/platform_data/clk-fch.h>
+#include <linux/platform_device.h>
 
 #include "internal.h"
 
-ACPI_MODULE_NAME("acpi_apd");
 struct apd_private_data;
 
-/**
- * ACPI_APD_SYSFS : add device attributes in sysfs
- * ACPI_APD_PM : attach power domain to device
- */
-#define ACPI_APD_SYSFS	BIT(0)
-#define ACPI_APD_PM	BIT(1)
-
 /**
  * struct apd_device_desc - a descriptor for apd device
- * @flags: device flags like %ACPI_APD_SYSFS, %ACPI_APD_PM
  * @fixed_clk_rate: fixed rate input clock source for acpi device;
  *			0 means no fixed rate input clock source
+ * @properties: build-in properties of the device such as UART
  * @setup: a hook routine to set device resource during create platform device
  *
  * Device description defined as acpi_device_id.driver_data
  */
 struct apd_device_desc {
-	unsigned int flags;
 	unsigned int fixed_clk_rate;
 	struct property_entry *properties;
 	int (*setup)(struct apd_private_data *pdata);
@@ -71,7 +60,6 @@ static int acpi_apd_setup(struct apd_private_data *pdata)
 }
 
 #ifdef CONFIG_X86_AMD_PLATFORM_DEVICE
-
 static int misc_check_res(struct acpi_resource *ares, void *data)
 {
 	struct resource res;
@@ -142,7 +130,7 @@ static const struct apd_device_desc cz_uart_desc = {
 static const struct apd_device_desc fch_misc_desc = {
 	.setup = fch_misc_setup,
 };
-#endif
+#endif /* CONFIG_X86_AMD_PLATFORM_DEVICE */
 
 #ifdef CONFIG_ARM64
 static const struct apd_device_desc xgene_i2c_desc = {
@@ -184,13 +172,9 @@ static const struct apd_device_desc hip08_spi_desc = {
 	.setup = acpi_apd_setup,
 	.fixed_clk_rate = 250000000,
 };
-#endif
+#endif /* CONFIG_ARM64 */
 
-#else
-
-#define APD_ADDR(desc) (0UL)
-
-#endif /* CONFIG_X86_AMD_PLATFORM_DEVICE */
+#endif
 
 /**
 * Create platform device during acpi scan attach handle.

drivers/acpi/acpi_cmos_rtc.c

@@ -15,8 +15,6 @@
 
 #include "internal.h"
 
-ACPI_MODULE_NAME("cmos rtc");
-
 static const struct acpi_device_id acpi_cmos_rtc_ids[] = {
 	{ "PNP0B00" },
 	{ "PNP0B01" },

drivers/acpi/acpi_configfs.c

@@ -228,6 +228,7 @@ static void acpi_table_drop_item(struct config_group *group,
 
 	ACPI_INFO(("Host-directed Dynamic ACPI Table Unload"));
 	acpi_unload_table(table->index);
+	config_item_put(cfg);
 }
 
 static struct configfs_group_operations acpi_table_group_ops = {

drivers/acpi/acpi_extlog.c

@@ -222,9 +222,9 @@ static int __init extlog_init(void)
 	u64 cap;
 	int rc;
 
-	rdmsrl(MSR_IA32_MCG_CAP, cap);
-
-	if (!(cap & MCG_ELOG_P) || !extlog_get_l1addr())
+	if (rdmsrl_safe(MSR_IA32_MCG_CAP, &cap) ||
+	    !(cap & MCG_ELOG_P) ||
+	    !extlog_get_l1addr())
 		return -ENODEV;
 
 	rc = -EINVAL;

drivers/acpi/acpi_lpss.c

@@ -26,8 +26,6 @@
 
 #include "internal.h"
 
-ACPI_MODULE_NAME("acpi_lpss");
-
 #ifdef CONFIG_X86_INTEL_LPSS
 
 #include <asm/cpu_device_id.h>

drivers/acpi/acpi_memhotplug.c

@@ -22,25 +22,13 @@
 #define ACPI_MEMORY_DEVICE_HID			"PNP0C80"
 #define ACPI_MEMORY_DEVICE_NAME			"Hotplug Mem Device"
 
-#define _COMPONENT		ACPI_MEMORY_DEVICE_COMPONENT
-
-#undef PREFIX
-#define 	PREFIX		"ACPI:memory_hp:"
-
-ACPI_MODULE_NAME("acpi_memhotplug");
-
 static const struct acpi_device_id memory_device_ids[] = {
 	{ACPI_MEMORY_DEVICE_HID, 0},
 	{"", 0},
 };
 
 #ifdef CONFIG_ACPI_HOTPLUG_MEMORY
 
-/* Memory Device States */
-#define MEMORY_INVALID_STATE	0
-#define MEMORY_POWER_ON_STATE	1
-#define MEMORY_POWER_OFF_STATE	2
-
 static int acpi_memory_device_add(struct acpi_device *device,
 				  const struct acpi_device_id *not_used);
 static void acpi_memory_device_remove(struct acpi_device *device);
@@ -64,8 +52,7 @@ struct acpi_memory_info {
 };
 
 struct acpi_memory_device {
-	struct acpi_device * device;
-	unsigned int state;	/* State of the memory device */
+	struct acpi_device *device;
 	struct list_head res_list;
 };
 
@@ -233,7 +220,6 @@ static int acpi_memory_enable_device(struct acpi_memory_device *mem_device)
 	}
 	if (!num_enabled) {
 		dev_err(&mem_device->device->dev, "add_memory failed\n");
-		mem_device->state = MEMORY_INVALID_STATE;
 		return -EINVAL;
 	}
 	/*
@@ -304,9 +290,6 @@ static int acpi_memory_device_add(struct acpi_device *device,
 		return result;
 	}
 
-	/* Set the device state */
-	mem_device->state = MEMORY_POWER_ON_STATE;
-
 	result = acpi_memory_check_device(mem_device);
 	if (result) {
 		acpi_memory_device_free(mem_device);

drivers/acpi/acpi_platform.c

@@ -19,8 +19,6 @@
 
 #include "internal.h"
 
-ACPI_MODULE_NAME("platform");
-
 static const struct acpi_device_id forbidden_id_list[] = {
 	{"PNP0000",  0},	/* PIC */
 	{"PNP0100",  0},	/* Timer */