i2c: jz4780: silence log flood on txabrt

The printout for txabrt is way too talkative and is highly annoying with
scanning programs like 'i2cdetect'. Reduce it to the minimum, the rest
can be gained by I2C core debugging and datasheet information. Also,
make it a debug printout, it won't help the regular user.

Fixes: ba92222 ("i2c: jz4780: Add i2c bus controller driver for Ingenic JZ4780")
Reported-by: H. Nikolaus Schaller <hns@goldelico.com>
Tested-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

drivers/i2c/busses/i2c-jz4780.c

@@ -78,25 +78,6 @@
 
 #define X1000_I2C_DC_STOP		BIT(9)
 
-static const char * const jz4780_i2c_abrt_src[] = {
-	"ABRT_7B_ADDR_NOACK",
-	"ABRT_10ADDR1_NOACK",
-	"ABRT_10ADDR2_NOACK",
-	"ABRT_XDATA_NOACK",
-	"ABRT_GCALL_NOACK",
-	"ABRT_GCALL_READ",
-	"ABRT_HS_ACKD",
-	"SBYTE_ACKDET",
-	"ABRT_HS_NORSTRT",
-	"SBYTE_NORSTRT",
-	"ABRT_10B_RD_NORSTRT",
-	"ABRT_MASTER_DIS",
-	"ARB_LOST",
-	"SLVFLUSH_TXFIFO",
-	"SLV_ARBLOST",
-	"SLVRD_INTX",
-};
-
 #define JZ4780_I2C_INTST_IGC		BIT(11)
 #define JZ4780_I2C_INTST_ISTT		BIT(10)
 #define JZ4780_I2C_INTST_ISTP		BIT(9)
@@ -576,21 +557,8 @@ static irqreturn_t jz4780_i2c_irq(int irqno, void *dev_id)
 
 static void jz4780_i2c_txabrt(struct jz4780_i2c *i2c, int src)
 {
-	int i;
-
-	dev_err(&i2c->adap.dev, "txabrt: 0x%08x\n", src);
-	dev_err(&i2c->adap.dev, "device addr=%x\n",
-		jz4780_i2c_readw(i2c, JZ4780_I2C_TAR));
-	dev_err(&i2c->adap.dev, "send cmd count:%d  %d\n",
-		i2c->cmd, i2c->cmd_buf[i2c->cmd]);
-	dev_err(&i2c->adap.dev, "receive data count:%d  %d\n",
-		i2c->cmd, i2c->data_buf[i2c->cmd]);
-
-	for (i = 0; i < 16; i++) {
-		if (src & BIT(i))
-			dev_dbg(&i2c->adap.dev, "I2C TXABRT[%d]=%s\n",
-				i, jz4780_i2c_abrt_src[i]);
-	}
+	dev_dbg(&i2c->adap.dev, "txabrt: 0x%08x, cmd: %d, send: %d, recv: %d\n",
+		src, i2c->cmd, i2c->cmd_buf[i2c->cmd], i2c->data_buf[i2c->cmd]);
 }
 
 static inline int jz4780_i2c_xfer_read(struct jz4780_i2c *i2c,