MIPS: Loongson64: reset: Prioritise firmware service

commit 4e7ca0b upstream.

We should always use firmware's poweroff & reboot service
if it's available as firmware may need to perform more task
than platform's syscon etc.

However _machine_restart & poweroff hooks are registered at
low priority, which means platform reboot driver can override
them.

Register firmware based reboot/poweroff implementation with
register_sys_off_handler with appropriate priority so that
they will be prioritised. Remove _machine_halt hook as it's
deemed to be unnecessary.

Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arch/mips/loongson64/reset.c

@@ -11,6 +11,7 @@
 #include <linux/init.h>
 #include <linux/kexec.h>
 #include <linux/pm.h>
+#include <linux/reboot.h>
 #include <linux/slab.h>
 
 #include <asm/bootinfo.h>
@@ -21,36 +22,21 @@
 #include <loongson.h>
 #include <boot_param.h>
 
-static void loongson_restart(char *command)
+static int firmware_restart(struct sys_off_data *unusedd)
 {
 
 	void (*fw_restart)(void) = (void *)loongson_sysconf.restart_addr;
 
 	fw_restart();
-	while (1) {
-		if (cpu_wait)
-			cpu_wait();
-	}
+	return NOTIFY_DONE;
 }
 
-static void loongson_poweroff(void)
+static int firmware_poweroff(struct sys_off_data *unused)
 {
 	void (*fw_poweroff)(void) = (void *)loongson_sysconf.poweroff_addr;
 
 	fw_poweroff();
-	while (1) {
-		if (cpu_wait)
-			cpu_wait();
-	}
-}
-
-static void loongson_halt(void)
-{
-	pr_notice("\n\n** You can safely turn off the power now **\n\n");
-	while (1) {
-		if (cpu_wait)
-			cpu_wait();
-	}
+	return NOTIFY_DONE;
 }
 
 #ifdef CONFIG_KEXEC
@@ -154,9 +140,17 @@ static void loongson_crash_shutdown(struct pt_regs *regs)
 
 static int __init mips_reboot_setup(void)
 {
-	_machine_restart = loongson_restart;
-	_machine_halt = loongson_halt;
-	pm_power_off = loongson_poweroff;
+	if (loongson_sysconf.restart_addr) {
+		register_sys_off_handler(SYS_OFF_MODE_RESTART,
+				 SYS_OFF_PRIO_FIRMWARE,
+				 firmware_restart, NULL);
+	}
+
+	if (loongson_sysconf.poweroff_addr) {
+		register_sys_off_handler(SYS_OFF_MODE_POWER_OFF,
+				 SYS_OFF_PRIO_FIRMWARE,
+				 firmware_poweroff, NULL);
+	}
 
 #ifdef CONFIG_KEXEC
 	kexec_argv = kmalloc(KEXEC_ARGV_SIZE, GFP_KERNEL);