Skip to content

Driverless USB HID bootloader and flashing tool for STM32F10X devices

License

Notifications You must be signed in to change notification settings

h3nr1ke/stm32-hid-bootloader

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

35 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

stm32-hid-bootloader

This is a driverless (no USB drivers needed, even on Windows) USB HID bootloader for STM32F10X devices.

It doesn't use ST libraries since they are bloated and buggy. Only CMSIS and some required system files and macros have been used from ST provided SDK.

This allowed for a very small bootloader - less than 4KB!

Firmware .bin files can be flashed with the provided CLI tool like:

hid-flash MYFIRMWARE.BIN

Please check the cli directory for the hid-flash tool source code.

Bootloader will activate (i.e., enter USB HID mode) if B2 (BOOT1) pin is driven HIGH when bootloader starts. Otherwise, it will simply jump to the user program address.

If you have a Blue Pill board, setting jumper BOOT1 to the 1 position (and leaving BOOT0 at the 0 position), the bootloader will kick in.

Sample user application is provided in the blinker directory. On a Blue Pill board, it will make the LED blink. Changes were made to the Makefile and the .ld script in order to tell the compiler/linker where user FLASH begins and the interrupt vector resides (0x8001000).

Latest version of the GCC ARM toolchain is recommended for building the bootloader.

About

Driverless USB HID bootloader and flashing tool for STM32F10X devices

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages

  • C 75.4%
  • Assembly 18.4%
  • Rich Text Format 3.8%
  • HTML 2.3%
  • Makefile 0.1%