Merge pull request #11 from golles/supported_devices

Add supported devices section in readme

README.md

@@ -24,6 +24,17 @@ For me, this USB-cable from [Ebay](https://www.ebay.nl/itm/USB-IR-Infrarot-Lese-
 ![cable](https://user-images.githubusercontent.com/2211503/136630069-9da49f09-6f9c-4618-8255-40195405f21a.jpg)
 
 
+### Supported devices
+
+This component is created to only support the Kamstrup 403 meter. This is a conscious decision because I do own this device and I can only offer support for that. There are some similar devices that work with the same communication protocol. If it does work for a meter that isn't listed below, please create a [feature request](https://github.com/golles/ha-kamstrup_403/issues/new?assignees=&labels=enhancement&template=feature_request.yaml) so I can update the table.
+Meter | Supported | Description
+-- | -- | --
+Kamstrup 403 | Yes | 
+Kamstrup 602 | Yes | Confirmed in [#10](https://github.com/golles/ha-kamstrup_403/issues/10)
+Kamstrup 402 | Maybe | [Mentioned here](https://github.com/golles/ha-kamstrup_403/blob/main/custom_components/kamstrup_403/kamstrup.py#L12)
+Kamstrup MC66C | No | Supported in my [old component](https://github.com/golles/Home-Assistant-Sensor-MC66C)
+
+
 ## Installation
 
 1. Using the tool of choice open the directory (folder) for your HA configuration (where you find `configuration.yaml`).
@@ -50,8 +61,8 @@ custom_components/kamstrup_403/sensor.py
 
 ## Configuration is done in the UI
 
-It's recommended to use devices as `/dev/serial/by-id` and not `/dev/ttyUSB1` as the port, as the first one should be stable, while the second one can change when you add/remove usb (serial) adapters, or even when you perform a system reboot.  
-The port will become something like: `/dev/serial/by-id/usb-FTDI_FT230X_Basic_UART_D307PBVY-if00-port0`.
+It's recommended to use devices as `/dev/serial/by-id` and not `/dev/ttyUSB1` as the port. This because the first example is a stable identifier, while the second one can change when USB devices are added or removed, or even when you perform a system reboot.  
+The port will be like: `/dev/serial/by-id/usb-FTDI_FT230X_Basic_UART_D307PBVY-if00-port0`.
 
 ## Contributions are welcome!