dellhw_exporter

Prometheus exporter for Dell Hardware components using OMSA.

The exporter was originally made by PrFalken. Due to some issues in the code, I rewrote the whole exporter using the "node_exporter" pattern and therefore moved it from being a fork out, to a standalone repository.

Omreport parsing functions were borrowed from the Bosun project, thank you very much for that, they are the most tedious part of the job.

This exporter wraps the omreport command from Dell OMSA. If you can't run or get any output from omreport on your system, then the exporter probably won't export any metrics.

Compatibility

Tested Dell OMSA Compatibility

The dellhw_exporter has been tested with the following OMSA versions:

• 7.4
• 8.4
• 9.1

Kernel Compatibility

Please note that only kernel versions that are supported by DELL DSU / OMSA tools are working!

State 07.06.2019: Dell OMSA DSU_19.05.00 is not compatible with 5.x kernel it seems (e.g., Fedora uses that kernel).

Should you run into issues when using the Container image, please follow the Troubleshooting - No metrics being exported.

Collectors

For a list of the available collectors, see Collectors doc page.

Configuration

For flags and environment variables, see Configuration doc page.

Caching

Optional caching can be enabled to prevent performance issues caused by this exporter, see Caching doc page.

Running in Container

Container Image available from:

• Quay.io
• GHCR.io

(Docker Hub is not receiving new images begining from release v1.10.0)

Pull the Container Image

Each Git tag is built and published as a release and container image.

Quay.io

docker pull quay.io/galexrt/dellhw_exporter

GHCR.IO

docker pull ghcr.io/galexrt/dellhw_exporter

Run the Container Image

NOTE The --privileged flag is required as the OMSA needs to access the host's devices and other components.

docker run -d --name dellhw_exporter --privileged -p 9137:9137 quay.io/galexrt/dellhw_exporter

Running without Docker / Podman

To run without Docker / Podman either download a release binary or build it (using make build command):

./dellhw_exporter
./dellhw_exporter --help
./dellhw_exporter [YOUR_FLAGS]

The DELL OMSA services must already be running for the exporter to be able to collect metrics!

E.g., run /opt/dell/srvadmin/sbin/srvadmin-services.sh start or systemctl start SERVICE_NAME (to enable autostart on use systemctl enable SERVICE_NAME; where SERVICE_NAME are the DELL OMSA service(s) you installed).

Prometheus

The exporter by default runs on port 9137 TCP.

Example static Prometheus Job config:

[...]
  - job_name: 'dellhw_exporter'
    # Override the global default and scrape targets from this job every 60 seconds.
    scrape_interval: 60s
    static_configs:
      - targets:
        - 'YOUR_EXPORTER_SERVER_HERE:9137'
[...]

Monitoring

Checkout the files in the contrib/monitoring/ directory.

Installation

See Installation doc page.

Troubleshooting

See Troubleshooting doc page.

Development

Golang version 1.23 is used for testing and building the dellhw_exporter.

go mod is used for "vendoring" of the dependencies.