Banana Pi R2 Armbian #77
Comments
|
there are some commits that should not be catched (seems like from 5.4.21...i removed them and replaced by ...) because they are not from me (don't know why), but it filters many out from the merges as i do the most work linux, uboot, images and other support (in forum), i cannot support armbian/openwrt too basicly mt6625l (drivers/misc/mediatek + some patches outside), hdmi, poweroff was not integrated and some tools. i guess trgmii-fix was added in the latest 5.4 dot-release after putting it to mainline maybe it is easier to look what i have done in 5.5...there i have sqashed the mt6625l patches together, also defconfig, build.sh,... https://github.com/frank-w/BPI-R2-4.14/commits/5.5-main additional patches were updates to make it compatible with 5.5 itself, but they are not needed for 5.4 also you do not need patches for mt7622 (BPI-r64) |
|
Thanks, I made one big diff 5.4-main vs 5.4 mainline for now. Removed wireguard since Armbian already has patch for that |
|
Full diff is about 284k lines https://github.com/martinl/banana-pi-r2/tree/master/armbian/patch/kernel/mt7623-dev |
|
it is the internal wifi-driver which is very huge...i cleaned it a bit, but it's to much to be upstreamed (same for mainline and openwrt)...maybe you should split wifi-changes from hdmi,thermal and the rest...something like squashing related commits together (e.g. tagged with mt6625l for internal wifi) |
|
yes, I took a quick look and I do not see the point in including the huge mt6625l until there is native driver available. Adding a supported USB or mPCIe wifi adapter to R2 seems like a reasonable workaround for now. |
|
I split the drivers subtree to per directory diffs for easier reviewing |
|
Splitting wifi-driver make not much sense because all so far is needed to work,dirs alone did not... |
|
yes, just making it easier to read/review. I'm mildly interested why the wifi driver is ~280k lines 🙂 |
|
It will not be reviewed/upstreamed in current form...it can only be in mainline if completely rewritten Current driver is based on android driver as full combo driver with fm,gps, and many other parts. Main-parts are removed but there is still some stuff in common part and makefiles. Also there are some switches for linux/android compatibility (different libs/headers) |
|
I'm mostly planning to review it myself, to see which parts are needed for Armbian patches |
|
It will be more interesting why wifi client mode does not work...see discussion in forum http://forum.banana-pi.org/t/bpi-r2-internal-wifi-bt-mt6625l-kernel/4307/299 |
frank-w
pushed a commit
that referenced
this issue
Nov 16, 2020
Richard reported a warning which can be reproduced by running the LTP madvise6 test (cgroup v1 in the non-hierarchical mode should be used): WARNING: CPU: 0 PID: 12 at mm/page_counter.c:57 page_counter_uncharge (mm/page_counter.c:57 mm/page_counter.c:50 mm/page_counter.c:156) Modules linked in: CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.9.0-rc7-22-default #77 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-48-gd9c812d-rebuilt.opensuse.org 04/01/2014 Workqueue: events drain_local_stock RIP: 0010:page_counter_uncharge (mm/page_counter.c:57 mm/page_counter.c:50 mm/page_counter.c:156) Call Trace: __memcg_kmem_uncharge (mm/memcontrol.c:3022) drain_obj_stock (./include/linux/rcupdate.h:689 mm/memcontrol.c:3114) drain_local_stock (mm/memcontrol.c:2255) process_one_work (./arch/x86/include/asm/jump_label.h:25 ./include/linux/jump_label.h:200 ./include/trace/events/workqueue.h:108 kernel/workqueue.c:2274) worker_thread (./include/linux/list.h:282 kernel/workqueue.c:2416) kthread (kernel/kthread.c:292) ret_from_fork (arch/x86/entry/entry_64.S:300) The problem occurs because in the non-hierarchical mode non-root page counters are not linked to root page counters, so the charge is not propagated to the root memory cgroup. After the removal of the original memory cgroup and reparenting of the object cgroup, the root cgroup might be uncharged by draining a objcg stock, for example. It leads to an eventual underflow of the charge and triggers a warning. Fix it by linking all page counters to corresponding root page counters in the non-hierarchical mode. Please note, that in the non-hierarchical mode all objcgs are always reparented to the root memory cgroup, even if the hierarchy has more than 1 level. This patch doesn't change it. The patch also doesn't affect how the hierarchical mode is working, which is the only sane and truly supported mode now. Thanks to Richard for reporting, debugging and providing an alternative version of the fix! Fixes: bf4f059 ("mm: memcg/slab: obj_cgroup API") Reported-by: <ltp@lists.linux.it> Signed-off-by: Roman Gushchin <guro@fb.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Reviewed-by: Michal Koutný <mkoutny@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20201026231326.3212225-1-guro@fb.com Debugged-by: Richard Palethorpe <rpalethorpe@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
frank-w
pushed a commit
that referenced
this issue
Jun 24, 2021
In some scenarios (kdump), dpdma hardware irqs has been enabled when calling request_irq in probe function, and then the dpdma irq handler xilinx_dpdma_irq_handler is invoked to access xdev->chan[i]. But at this moment xdev->chan[i] hasn't been initialized. We should ensure the dpdma controller to be in a consistent and clean state before further initialization. So add dpdma_hw_init() to do this. Furthermore, in xilinx_dpdma_disable_irq, disable all interrupts instead of error interrupts. This patch is to fix the kdump kernel crash as below: [ 3.696128] Unable to handle kernel NULL pointer dereference at virtual address 000000000000012c [ 3.696710] xilinx-zynqmp-dpdma fd4c0000.dma-controller: Xilinx DPDMA engine is probed [ 3.704900] Mem abort info: [ 3.704902] ESR = 0x96000005 [ 3.704905] EC = 0x25: DABT (current EL), IL = 32 bits [ 3.704907] SET = 0, FnV = 0 [ 3.704912] EA = 0, S1PTW = 0 [ 3.713800] ahci-ceva fd0c0000.ahci: supply ahci not found, using dummy regulator [ 3.715585] Data abort info: [ 3.715587] ISV = 0, ISS = 0x00000005 [ 3.715589] CM = 0, WnR = 0 [ 3.715592] [000000000000012c] user address but active_mm is swapper [ 3.715596] Internal error: Oops: 96000005 [#1] SMP [ 3.715599] Modules linked in: [ 3.715608] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.0-12170-g60894882155f-dirty #77 [ 3.723937] Hardware name: ZynqMP ZCU102 Rev1.0 (DT) [ 3.723942] pstate: 80000085 (Nzcv daIf -PAN -UAO -TCO BTYPE=--) [ 3.723956] pc : xilinx_dpdma_irq_handler+0x418/0x560 [ 3.793049] lr : xilinx_dpdma_irq_handler+0x3d8/0x560 [ 3.798089] sp : ffffffc01186bdf0 [ 3.801388] x29: ffffffc01186bdf0 x28: ffffffc011836f28 [ 3.806692] x27: ffffff8023e0ac80 x26: 0000000000000080 [ 3.811996] x25: 0000000008000408 x24: 0000000000000003 [ 3.817300] x23: ffffffc01186be70 x22: ffffffc011291740 [ 3.822604] x21: 0000000000000000 x20: 0000000008000408 [ 3.827908] x19: 0000000000000000 x18: 0000000000000010 [ 3.833212] x17: 0000000000000000 x16: 0000000000000000 [ 3.838516] x15: 0000000000000000 x14: ffffffc011291740 [ 3.843820] x13: ffffffc02eb4d000 x12: 0000000034d4d91d [ 3.849124] x11: 0000000000000040 x10: ffffffc0112d2d48 [ 3.854428] x9 : ffffffc0112d2d40 x8 : ffffff8021c00268 [ 3.859732] x7 : 0000000000000000 x6 : ffffffc011836000 [ 3.865036] x5 : 0000000000000003 x4 : 0000000000000000 [ 3.870340] x3 : 0000000000000001 x2 : 0000000000000000 [ 3.875644] x1 : 0000000000000000 x0 : 000000000000012c [ 3.880948] Call trace: [ 3.883382] xilinx_dpdma_irq_handler+0x418/0x560 [ 3.888079] __handle_irq_event_percpu+0x5c/0x178 [ 3.892774] handle_irq_event_percpu+0x34/0x98 [ 3.897210] handle_irq_event+0x44/0xb8 [ 3.901030] handle_fasteoi_irq+0xd0/0x190 [ 3.905117] generic_handle_irq+0x30/0x48 [ 3.909111] __handle_domain_irq+0x64/0xc0 [ 3.913192] gic_handle_irq+0x78/0xa0 [ 3.916846] el1_irq+0xc4/0x180 [ 3.919982] cpuidle_enter_state+0x134/0x2f8 [ 3.924243] cpuidle_enter+0x38/0x50 [ 3.927810] call_cpuidle+0x1c/0x40 [ 3.931290] do_idle+0x20c/0x270 [ 3.934502] cpu_startup_entry+0x28/0x58 [ 3.938410] rest_init+0xbc/0xcc [ 3.941631] arch_call_rest_init+0x10/0x1c [ 3.945718] start_kernel+0x51c/0x558 Fixes: 7cbb0c6 ("dmaengine: xilinx: dpdma: Add the Xilinx DisplayPort DMA engine driver") Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com> Link: https://lore.kernel.org/r/20210430064041.4058180-1-quanyang.wang@windriver.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
frank-w
pushed a commit
that referenced
this issue
Jun 29, 2021
[ Upstream commit 538ea65 ] In some scenarios (kdump), dpdma hardware irqs has been enabled when calling request_irq in probe function, and then the dpdma irq handler xilinx_dpdma_irq_handler is invoked to access xdev->chan[i]. But at this moment xdev->chan[i] hasn't been initialized. We should ensure the dpdma controller to be in a consistent and clean state before further initialization. So add dpdma_hw_init() to do this. Furthermore, in xilinx_dpdma_disable_irq, disable all interrupts instead of error interrupts. This patch is to fix the kdump kernel crash as below: [ 3.696128] Unable to handle kernel NULL pointer dereference at virtual address 000000000000012c [ 3.696710] xilinx-zynqmp-dpdma fd4c0000.dma-controller: Xilinx DPDMA engine is probed [ 3.704900] Mem abort info: [ 3.704902] ESR = 0x96000005 [ 3.704905] EC = 0x25: DABT (current EL), IL = 32 bits [ 3.704907] SET = 0, FnV = 0 [ 3.704912] EA = 0, S1PTW = 0 [ 3.713800] ahci-ceva fd0c0000.ahci: supply ahci not found, using dummy regulator [ 3.715585] Data abort info: [ 3.715587] ISV = 0, ISS = 0x00000005 [ 3.715589] CM = 0, WnR = 0 [ 3.715592] [000000000000012c] user address but active_mm is swapper [ 3.715596] Internal error: Oops: 96000005 [#1] SMP [ 3.715599] Modules linked in: [ 3.715608] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.0-12170-g60894882155f-dirty #77 [ 3.723937] Hardware name: ZynqMP ZCU102 Rev1.0 (DT) [ 3.723942] pstate: 80000085 (Nzcv daIf -PAN -UAO -TCO BTYPE=--) [ 3.723956] pc : xilinx_dpdma_irq_handler+0x418/0x560 [ 3.793049] lr : xilinx_dpdma_irq_handler+0x3d8/0x560 [ 3.798089] sp : ffffffc01186bdf0 [ 3.801388] x29: ffffffc01186bdf0 x28: ffffffc011836f28 [ 3.806692] x27: ffffff8023e0ac80 x26: 0000000000000080 [ 3.811996] x25: 0000000008000408 x24: 0000000000000003 [ 3.817300] x23: ffffffc01186be70 x22: ffffffc011291740 [ 3.822604] x21: 0000000000000000 x20: 0000000008000408 [ 3.827908] x19: 0000000000000000 x18: 0000000000000010 [ 3.833212] x17: 0000000000000000 x16: 0000000000000000 [ 3.838516] x15: 0000000000000000 x14: ffffffc011291740 [ 3.843820] x13: ffffffc02eb4d000 x12: 0000000034d4d91d [ 3.849124] x11: 0000000000000040 x10: ffffffc0112d2d48 [ 3.854428] x9 : ffffffc0112d2d40 x8 : ffffff8021c00268 [ 3.859732] x7 : 0000000000000000 x6 : ffffffc011836000 [ 3.865036] x5 : 0000000000000003 x4 : 0000000000000000 [ 3.870340] x3 : 0000000000000001 x2 : 0000000000000000 [ 3.875644] x1 : 0000000000000000 x0 : 000000000000012c [ 3.880948] Call trace: [ 3.883382] xilinx_dpdma_irq_handler+0x418/0x560 [ 3.888079] __handle_irq_event_percpu+0x5c/0x178 [ 3.892774] handle_irq_event_percpu+0x34/0x98 [ 3.897210] handle_irq_event+0x44/0xb8 [ 3.901030] handle_fasteoi_irq+0xd0/0x190 [ 3.905117] generic_handle_irq+0x30/0x48 [ 3.909111] __handle_domain_irq+0x64/0xc0 [ 3.913192] gic_handle_irq+0x78/0xa0 [ 3.916846] el1_irq+0xc4/0x180 [ 3.919982] cpuidle_enter_state+0x134/0x2f8 [ 3.924243] cpuidle_enter+0x38/0x50 [ 3.927810] call_cpuidle+0x1c/0x40 [ 3.931290] do_idle+0x20c/0x270 [ 3.934502] cpu_startup_entry+0x28/0x58 [ 3.938410] rest_init+0xbc/0xcc [ 3.941631] arch_call_rest_init+0x10/0x1c [ 3.945718] start_kernel+0x51c/0x558 Fixes: 7cbb0c6 ("dmaengine: xilinx: dpdma: Add the Xilinx DisplayPort DMA engine driver") Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com> Link: https://lore.kernel.org/r/20210430064041.4058180-1-quanyang.wang@windriver.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
|
No more answer from creator of issue |
frank-w
pushed a commit
that referenced
this issue
Feb 17, 2023
[ Upstream commit ede5a38 ] When the MAC is connected to a 10 Mb/s PHY and the PTP clock is derived from the MAC reference clock (default), the clk_ptp_rate becomes too small and the calculated sub second increment becomes 0 when computed by the stmmac_config_sub_second_increment() function within stmmac_init_tstamp_counter(). Therefore, the subsequent div_u64 in stmmac_init_tstamp_counter() operation triggers a divide by 0 exception as shown below. [ 95.062067] socfpga-dwmac ff700000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0 [ 95.076440] socfpga-dwmac ff700000.ethernet eth0: PHY [stmmac-0:08] driver [NCN26000] (irq=49) [ 95.095964] dwmac1000: Master AXI performs any burst length [ 95.101588] socfpga-dwmac ff700000.ethernet eth0: No Safety Features support found [ 95.109428] Division by zero in kernel. [ 95.113447] CPU: 0 PID: 239 Comm: ifconfig Not tainted 6.1.0-rc7-centurion3-1.0.3.0-01574-gb624218205b7-dirty #77 [ 95.123686] Hardware name: Altera SOCFPGA [ 95.127695] unwind_backtrace from show_stack+0x10/0x14 [ 95.132938] show_stack from dump_stack_lvl+0x40/0x4c [ 95.137992] dump_stack_lvl from Ldiv0+0x8/0x10 [ 95.142527] Ldiv0 from __aeabi_uidivmod+0x8/0x18 [ 95.147232] __aeabi_uidivmod from div_u64_rem+0x1c/0x40 [ 95.152552] div_u64_rem from stmmac_init_tstamp_counter+0xd0/0x164 [ 95.158826] stmmac_init_tstamp_counter from stmmac_hw_setup+0x430/0xf00 [ 95.165533] stmmac_hw_setup from __stmmac_open+0x214/0x2d4 [ 95.171117] __stmmac_open from stmmac_open+0x30/0x44 [ 95.176182] stmmac_open from __dev_open+0x11c/0x134 [ 95.181172] __dev_open from __dev_change_flags+0x168/0x17c [ 95.186750] __dev_change_flags from dev_change_flags+0x14/0x50 [ 95.192662] dev_change_flags from devinet_ioctl+0x2b4/0x604 [ 95.198321] devinet_ioctl from inet_ioctl+0x1ec/0x214 [ 95.203462] inet_ioctl from sock_ioctl+0x14c/0x3c4 [ 95.208354] sock_ioctl from vfs_ioctl+0x20/0x38 [ 95.212984] vfs_ioctl from sys_ioctl+0x250/0x844 [ 95.217691] sys_ioctl from ret_fast_syscall+0x0/0x4c [ 95.222743] Exception stack(0xd0ee1fa8 to 0xd0ee1ff0) [ 95.227790] 1fa0: 00574c4f be9aeca4 00000003 00008914 be9aeca4 be9aec50 [ 95.235945] 1fc0: 00574c4f be9aeca4 0059f078 00000036 be9aee8c be9aef7a 00000015 00000000 [ 95.244096] 1fe0: 005a01f0 be9aec38 004d7484 b6e67d74 Signed-off-by: Piergiorgio Beruto <piergiorgio.beruto@gmail.com> Fixes: 91a2559 ("net: stmmac: Fix sub-second increment") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/de4c64ccac9084952c56a06a8171d738604c4770.1670678513.git.piergiorgio.beruto@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
frank-w
pushed a commit
that referenced
this issue
Feb 17, 2023
[ Upstream commit ede5a38 ] When the MAC is connected to a 10 Mb/s PHY and the PTP clock is derived from the MAC reference clock (default), the clk_ptp_rate becomes too small and the calculated sub second increment becomes 0 when computed by the stmmac_config_sub_second_increment() function within stmmac_init_tstamp_counter(). Therefore, the subsequent div_u64 in stmmac_init_tstamp_counter() operation triggers a divide by 0 exception as shown below. [ 95.062067] socfpga-dwmac ff700000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0 [ 95.076440] socfpga-dwmac ff700000.ethernet eth0: PHY [stmmac-0:08] driver [NCN26000] (irq=49) [ 95.095964] dwmac1000: Master AXI performs any burst length [ 95.101588] socfpga-dwmac ff700000.ethernet eth0: No Safety Features support found [ 95.109428] Division by zero in kernel. [ 95.113447] CPU: 0 PID: 239 Comm: ifconfig Not tainted 6.1.0-rc7-centurion3-1.0.3.0-01574-gb624218205b7-dirty #77 [ 95.123686] Hardware name: Altera SOCFPGA [ 95.127695] unwind_backtrace from show_stack+0x10/0x14 [ 95.132938] show_stack from dump_stack_lvl+0x40/0x4c [ 95.137992] dump_stack_lvl from Ldiv0+0x8/0x10 [ 95.142527] Ldiv0 from __aeabi_uidivmod+0x8/0x18 [ 95.147232] __aeabi_uidivmod from div_u64_rem+0x1c/0x40 [ 95.152552] div_u64_rem from stmmac_init_tstamp_counter+0xd0/0x164 [ 95.158826] stmmac_init_tstamp_counter from stmmac_hw_setup+0x430/0xf00 [ 95.165533] stmmac_hw_setup from __stmmac_open+0x214/0x2d4 [ 95.171117] __stmmac_open from stmmac_open+0x30/0x44 [ 95.176182] stmmac_open from __dev_open+0x11c/0x134 [ 95.181172] __dev_open from __dev_change_flags+0x168/0x17c [ 95.186750] __dev_change_flags from dev_change_flags+0x14/0x50 [ 95.192662] dev_change_flags from devinet_ioctl+0x2b4/0x604 [ 95.198321] devinet_ioctl from inet_ioctl+0x1ec/0x214 [ 95.203462] inet_ioctl from sock_ioctl+0x14c/0x3c4 [ 95.208354] sock_ioctl from vfs_ioctl+0x20/0x38 [ 95.212984] vfs_ioctl from sys_ioctl+0x250/0x844 [ 95.217691] sys_ioctl from ret_fast_syscall+0x0/0x4c [ 95.222743] Exception stack(0xd0ee1fa8 to 0xd0ee1ff0) [ 95.227790] 1fa0: 00574c4f be9aeca4 00000003 00008914 be9aeca4 be9aec50 [ 95.235945] 1fc0: 00574c4f be9aeca4 0059f078 00000036 be9aee8c be9aef7a 00000015 00000000 [ 95.244096] 1fe0: 005a01f0 be9aec38 004d7484 b6e67d74 Signed-off-by: Piergiorgio Beruto <piergiorgio.beruto@gmail.com> Fixes: 91a2559 ("net: stmmac: Fix sub-second increment") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/de4c64ccac9084952c56a06a8171d738604c4770.1670678513.git.piergiorgio.beruto@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
frank-w
pushed a commit
that referenced
this issue
Feb 17, 2023
[ Upstream commit ede5a38 ] When the MAC is connected to a 10 Mb/s PHY and the PTP clock is derived from the MAC reference clock (default), the clk_ptp_rate becomes too small and the calculated sub second increment becomes 0 when computed by the stmmac_config_sub_second_increment() function within stmmac_init_tstamp_counter(). Therefore, the subsequent div_u64 in stmmac_init_tstamp_counter() operation triggers a divide by 0 exception as shown below. [ 95.062067] socfpga-dwmac ff700000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0 [ 95.076440] socfpga-dwmac ff700000.ethernet eth0: PHY [stmmac-0:08] driver [NCN26000] (irq=49) [ 95.095964] dwmac1000: Master AXI performs any burst length [ 95.101588] socfpga-dwmac ff700000.ethernet eth0: No Safety Features support found [ 95.109428] Division by zero in kernel. [ 95.113447] CPU: 0 PID: 239 Comm: ifconfig Not tainted 6.1.0-rc7-centurion3-1.0.3.0-01574-gb624218205b7-dirty #77 [ 95.123686] Hardware name: Altera SOCFPGA [ 95.127695] unwind_backtrace from show_stack+0x10/0x14 [ 95.132938] show_stack from dump_stack_lvl+0x40/0x4c [ 95.137992] dump_stack_lvl from Ldiv0+0x8/0x10 [ 95.142527] Ldiv0 from __aeabi_uidivmod+0x8/0x18 [ 95.147232] __aeabi_uidivmod from div_u64_rem+0x1c/0x40 [ 95.152552] div_u64_rem from stmmac_init_tstamp_counter+0xd0/0x164 [ 95.158826] stmmac_init_tstamp_counter from stmmac_hw_setup+0x430/0xf00 [ 95.165533] stmmac_hw_setup from __stmmac_open+0x214/0x2d4 [ 95.171117] __stmmac_open from stmmac_open+0x30/0x44 [ 95.176182] stmmac_open from __dev_open+0x11c/0x134 [ 95.181172] __dev_open from __dev_change_flags+0x168/0x17c [ 95.186750] __dev_change_flags from dev_change_flags+0x14/0x50 [ 95.192662] dev_change_flags from devinet_ioctl+0x2b4/0x604 [ 95.198321] devinet_ioctl from inet_ioctl+0x1ec/0x214 [ 95.203462] inet_ioctl from sock_ioctl+0x14c/0x3c4 [ 95.208354] sock_ioctl from vfs_ioctl+0x20/0x38 [ 95.212984] vfs_ioctl from sys_ioctl+0x250/0x844 [ 95.217691] sys_ioctl from ret_fast_syscall+0x0/0x4c [ 95.222743] Exception stack(0xd0ee1fa8 to 0xd0ee1ff0) [ 95.227790] 1fa0: 00574c4f be9aeca4 00000003 00008914 be9aeca4 be9aec50 [ 95.235945] 1fc0: 00574c4f be9aeca4 0059f078 00000036 be9aee8c be9aef7a 00000015 00000000 [ 95.244096] 1fe0: 005a01f0 be9aec38 004d7484 b6e67d74 Signed-off-by: Piergiorgio Beruto <piergiorgio.beruto@gmail.com> Fixes: 91a2559 ("net: stmmac: Fix sub-second increment") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/de4c64ccac9084952c56a06a8171d738604c4770.1670678513.git.piergiorgio.beruto@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
frank-w
pushed a commit
that referenced
this issue
Feb 17, 2023
[ Upstream commit ede5a38 ] When the MAC is connected to a 10 Mb/s PHY and the PTP clock is derived from the MAC reference clock (default), the clk_ptp_rate becomes too small and the calculated sub second increment becomes 0 when computed by the stmmac_config_sub_second_increment() function within stmmac_init_tstamp_counter(). Therefore, the subsequent div_u64 in stmmac_init_tstamp_counter() operation triggers a divide by 0 exception as shown below. [ 95.062067] socfpga-dwmac ff700000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0 [ 95.076440] socfpga-dwmac ff700000.ethernet eth0: PHY [stmmac-0:08] driver [NCN26000] (irq=49) [ 95.095964] dwmac1000: Master AXI performs any burst length [ 95.101588] socfpga-dwmac ff700000.ethernet eth0: No Safety Features support found [ 95.109428] Division by zero in kernel. [ 95.113447] CPU: 0 PID: 239 Comm: ifconfig Not tainted 6.1.0-rc7-centurion3-1.0.3.0-01574-gb624218205b7-dirty #77 [ 95.123686] Hardware name: Altera SOCFPGA [ 95.127695] unwind_backtrace from show_stack+0x10/0x14 [ 95.132938] show_stack from dump_stack_lvl+0x40/0x4c [ 95.137992] dump_stack_lvl from Ldiv0+0x8/0x10 [ 95.142527] Ldiv0 from __aeabi_uidivmod+0x8/0x18 [ 95.147232] __aeabi_uidivmod from div_u64_rem+0x1c/0x40 [ 95.152552] div_u64_rem from stmmac_init_tstamp_counter+0xd0/0x164 [ 95.158826] stmmac_init_tstamp_counter from stmmac_hw_setup+0x430/0xf00 [ 95.165533] stmmac_hw_setup from __stmmac_open+0x214/0x2d4 [ 95.171117] __stmmac_open from stmmac_open+0x30/0x44 [ 95.176182] stmmac_open from __dev_open+0x11c/0x134 [ 95.181172] __dev_open from __dev_change_flags+0x168/0x17c [ 95.186750] __dev_change_flags from dev_change_flags+0x14/0x50 [ 95.192662] dev_change_flags from devinet_ioctl+0x2b4/0x604 [ 95.198321] devinet_ioctl from inet_ioctl+0x1ec/0x214 [ 95.203462] inet_ioctl from sock_ioctl+0x14c/0x3c4 [ 95.208354] sock_ioctl from vfs_ioctl+0x20/0x38 [ 95.212984] vfs_ioctl from sys_ioctl+0x250/0x844 [ 95.217691] sys_ioctl from ret_fast_syscall+0x0/0x4c [ 95.222743] Exception stack(0xd0ee1fa8 to 0xd0ee1ff0) [ 95.227790] 1fa0: 00574c4f be9aeca4 00000003 00008914 be9aeca4 be9aec50 [ 95.235945] 1fc0: 00574c4f be9aeca4 0059f078 00000036 be9aee8c be9aef7a 00000015 00000000 [ 95.244096] 1fe0: 005a01f0 be9aec38 004d7484 b6e67d74 Signed-off-by: Piergiorgio Beruto <piergiorgio.beruto@gmail.com> Fixes: 91a2559 ("net: stmmac: Fix sub-second increment") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/de4c64ccac9084952c56a06a8171d738604c4770.1670678513.git.piergiorgio.beruto@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
frank-w
pushed a commit
that referenced
this issue
Feb 10, 2024
[ Upstream commit b16904f ] With latest upstream llvm18, the following test cases failed: $ ./test_progs -j #13/2 bpf_cookie/multi_kprobe_link_api:FAIL #13/3 bpf_cookie/multi_kprobe_attach_api:FAIL #13 bpf_cookie:FAIL #77 fentry_fexit:FAIL #78/1 fentry_test/fentry:FAIL #78 fentry_test:FAIL #82/1 fexit_test/fexit:FAIL #82 fexit_test:FAIL #112/1 kprobe_multi_test/skel_api:FAIL #112/2 kprobe_multi_test/link_api_addrs:FAIL [...] #112 kprobe_multi_test:FAIL #356/17 test_global_funcs/global_func17:FAIL #356 test_global_funcs:FAIL Further analysis shows llvm upstream patch [1] is responsible for the above failures. For example, for function bpf_fentry_test7() in net/bpf/test_run.c, without [1], the asm code is: 0000000000000400 <bpf_fentry_test7>: 400: f3 0f 1e fa endbr64 404: e8 00 00 00 00 callq 0x409 <bpf_fentry_test7+0x9> 409: 48 89 f8 movq %rdi, %rax 40c: c3 retq 40d: 0f 1f 00 nopl (%rax) ... and with [1], the asm code is: 0000000000005d20 <bpf_fentry_test7.specialized.1>: 5d20: e8 00 00 00 00 callq 0x5d25 <bpf_fentry_test7.specialized.1+0x5> 5d25: c3 retq ... and <bpf_fentry_test7.specialized.1> is called instead of <bpf_fentry_test7> and this caused test failures for #13/#77 etc. except #356. For test case #356/17, with [1] (progs/test_global_func17.c)), the main prog looks like: 0000000000000000 <global_func17>: 0: b4 00 00 00 2a 00 00 00 w0 = 0x2a 1: 95 00 00 00 00 00 00 00 exit ... which passed verification while the test itself expects a verification failure. Let us add 'barrier_var' style asm code in both places to prevent function specialization which caused selftests failure. [1] llvm/llvm-project#72903 Signed-off-by: Yonghong Song <yonghong.song@linux.dev> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20231127050342.1945270-1-yonghong.song@linux.dev Signed-off-by: Sasha Levin <sashal@kernel.org>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Hi
I'm currently looking into options for adding official Banana Pi R2 support to Armbian (armbian/build#2147) using your 5.4-main as base. Can you please explain which patches are needed for R2 from your 5.4-main branch vs mainline 5.4
Also, would you be interested in testing and supporting R2 on Armbian to some extent
Martin
The text was updated successfully, but these errors were encountered: