-
Notifications
You must be signed in to change notification settings - Fork 3
Set up sm2uploader on Windows
The following instructions show how to set up the sm2uploader for a Snapmaker J1. These steps are the same for other Snapmaker
Download of sm2uploader
Download the sm2uploader file from the following link: sm2uploader
Directory for sm2uploader
Create a folder named j1
in the root of the C: hard drive
Unzip the zip and copy the sm2uploader.exe
Extract the downloaded zip from the sm2uploader website, then copy the sm2uploader.exe
from the extracted folder to the following folder: C:\j1
rename sm2uploader.exe file
Rename the sm2uploader-win64.exe
as follows: sm2uploader.exe
open and process cmd
Click on the Windows key and in the Windows Start menu type cmd
and start the cmd
If the cmd you change to the folder j1
with the following command: cd j1
After changing to the folder, enter the following command and then click enter: sm2uploader.exe
After you have run the exe, your IP address
will be displayed, note this in between.
Important: The IP address will be required later in the setup process.
open GalaxySlicer
Open the Windows Start menu and click on GalaxySlicer.
create a Snapmaker J1
To create a Snapmaker J1, the printer selection must be opened, this is opened with the gear at the top of the Printer tab:
When choosing a printer, choose a Snapamker with any nozzle diameter and then click confirm:
Switch to advanced mode
To switch to advanced mode, click on the follow button next to advanced:
Adding a second filament
To add another filament, click on the plus in the Filament tab.
switch to the Others tab
Click Others to switch the tab.
Setting up the post processor
Scroll all the way down until the post-processor input field appears.
Replace the text ~/sm2uploader -fix -host J1X2; ;
from the text box with the following text: C:\j1\sm2uploader.exe -fix -host [IP-Adresse];
After the text has been replaced, the [IP-Adresse]
must be replaced with the noted IP address from the cmd window.
So it looks like this: