Releases: fr3ak2402/GalaxySlicer
GalaxySlicer V1.0.0-beta
This is an beta version that is still in development.
We have revised our slicer - and fixed a few bugs in the process.
Bug fixes
-
New version dialog
When starting GalaxySlicer the dialog for a new version was always displayed although there was no newer version, this has been fixed. In addition, it was also fixed that the release notes of the new version are displayed and the direct call to the release page of Github works.
-
Creality K1 & K1 Max (not pausing)
The problem that the Creality K1 & K1 Max did not pause was fixed.
Improvements
-
Toolbar (Windows)
The toolbar has been revised so that it now corresponds to the Windows standard and some functions are easier to find.
-
About window
In the About window, the version was displayed with a different text background & text sizes on macOS and Windows, this has been fixed so that it is now displayed the same on all operating systems.
-
Printer selection
Printer selection has been improved so that 4 printers are now displayed in one line instead of only 3 printers. This increases the clarity of the printer selection.
-
Translation setup wizard
The setup wizard has been translated in all supported languages of GalaxySlicer, so the usability has been improved.
Changes
Introduction of new functions
-
Ported from BambuStudio 1.7x
The new added features of BambuStudio 1.7x have been integrated into GalaxySlicer.
-
Ported from OrcaSlicer 1.6x
The new added features of OrcaSlicer 1.6x have been integrated into GalaxySlicer.
-
Marlin2 support
Support for marlin2 has been implemented in GalaxySlicer.
Support for additional translations
- Chinese (Traditional)
- Korean
- Russian
- Turkish
- Ukranian
Support for additional printers
- AnkerMake M5C
- Anycubic Kobra 2
- Craftbot FLOW
- Craftbot FLOW XL
- Craftbot FLOW Wide XL
- Craftbot FLOW IDEX
- Craftbot FLOW IDEX XL
- Custom Marlin2
- Elegoo Neptune 4
- Elegoo Neptune 4 Pro
- Kingroon KP3S Pro S1
- Kingroon KP3S Pro V2
- Kingroon KP5L
- Kingroon KP5M
- KiS-3d S235 EVO
- Sovol SV07
- Sovol SV07 Plus
- Tenlog TL-D3 Pro
- Wanhao D12
Support for additional operating systems
- macOS (x64)
Dependencies update
- Boost was upgraded to V1.78 (macOS)
- Boost was upgraded to V1.83 (Windows)
- oneTBB has been upgraded to V2019.10.0
GalaxySlicer V1.0.0-alpha2
This is an alpha version that is still in development and with this we leave the pre-release.
We have revised our slicer - and fixed a few bugs in the process.
Bug fixes
-
Creating multiple printers
After selecting multiple printers in the selection, not all printers were created, this error has been fixed.
Improvements
-
Printer selection
The manufacturer list in the printer selection is now sorted alphabetically, so that loading the printer selection now works faster than before. In addition, the problem also caused the list to be displayed differently under the various operating systems.
-
Using IDEX Printers (Beta)
The assignment of the filament to the extruderm has been simplified, making it easier to use IDEX printers. This is currently only available on the Snapmaker J1.
Changes
-
Introduction of the new profile system
The profile system is now in its final state and will not be changed anymore, so you can now create your own profiles and be sure that they will be compatible in the next version.
⚠️ All profiles from the pre-release might not work and have to be created again. -
Adding more Sovol filaments
Added a profile for ASA & TPU for the Sovol printers
-
Raise3D gcode flavour
Changed the gcode flavour from marlin to reprap
Introduction of new functions
In the printer selection you can now easily search for your favourite vendor using the search field to get to your favourite vendor even faster.
Support for additional printers
- BambuLab P1S
- Creality CR-6 Max
- Creality CR-6 SE
- Creality CR-10 Smart Pro
- Creality Ender-7
- JGMaker Artist-D
- JGMaker Artist-D Pro
- Prusa MK4
- Prusa XL
- Sovol SV02 (Mixer)
- UltiMaker 2+
- UltiMaker 2+ Extended
Dependencies update
- Boost was upgraded to V1.82 (Windows)
- Curl was upgraded to V8.2.0
- oneTBB has been upgraded to V2019.9.0
Thanks to
- @macdylan for working on the smfix & sm2upload for the Snapmaker J1 and porting functions from Prusa Slicer for use with IDEX printers.