Skip to content

foldvarid93/JBC_SolderingStation

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

66 Commits
 
 
 
 
 
 

Repository files navigation

Welcome!

Actually you are watching my JBC soldering station project.

Version 1 will be improved at some points however it works fine too.

Planned Improvements:

Software and application
  • USB-C connector will be used to update the software in DFU mode. USB2.0 HS will be used
  • FREERTOS will be used for task scheduling
  • The software application will be more flexible for migrate to other MCUs
  • StemWin GUI will remain for STM32F4 or higher, 16x2 LCD driver will be used for slower MCUs
  • ...
Hardware and PCB
  • PCB will remain the same size
  • AC transformer with triac will remain to avoid SMPS's high frequency noise
  • Opamp will be revised if it is possible it will be changed to a better one
  • Zero crossing detection may be changed to a more simple one
  • Ambient temperature sensor and I2C connection will be removed
  • ...

;)