Bottlerocket OS

Welcome to Bottlerocket!

Bottlerocket is a free and open-source Linux-based operating system meant for hosting containers.

If you’re ready to jump right in, read one of our setup guides for running Bottlerocket in Amazon EKS, Amazon ECS, or VMware. If you're interested in running Bottlerocket on bare metal servers, please refer to the provisioning guide to get started.

Bottlerocket focuses on security and maintainability, providing a reliable, consistent, and safe platform for container-based workloads. This is a reflection of what we've learned building operating systems and services at Amazon. You can read more about what drives us in our charter.

The base operating system has just what you need to run containers reliably, and is built with standard open-source components. Bottlerocket-specific additions focus on reliable updates and on the API. Instead of making configuration changes manually, you can change settings with an API call, and these changes are automatically migrated through updates.

Some notable features include:

API access for configuring your system, with secure out-of-band access methods when you need them.
Updates based on partition flips, for fast and reliable system updates.
Modeled configuration that's automatically migrated through updates.
Security as a top priority.

Participate in the Community

There are many ways to take part in the Bottlerocket community:

Join us on Meetup to hear about the latest Bottlerocket (virtual/in-person) events and community meetings. Community meetings are typically every other week.

Details can be found under the Events section on Meetup, and you will receive email notifications if you become a member of the Meetup group. (It's free to join!)
Start or join a discussion if you have questions about Bottlerocket.
If you're interested in contributing, thank you! Please see our contributor's guide.

Contact us

If you find a security issue, please contact our security team rather than opening an issue.

We use GitHub issues to track other bug reports and feature requests. You can look at existing issues to see whether your concern is already known.

If not, you can select from a few templates and get some guidance on the type of information that would be most helpful. Contact us with a new issue here.

We don't have other communication channels set up quite yet, but don't worry about making an issue or a discussion thread! You can let us know about things that seem difficult, or even ways you might like to help.

Variants

To start, we're focusing on the use of Bottlerocket as a host OS in AWS EKS Kubernetes clusters and Amazon ECS clusters. We’re excited to get early feedback and to continue working on more use cases!

Bottlerocket is architected such that different cloud environments and container orchestrators can be supported in the future. A build of Bottlerocket that supports different features or integration characteristics is known as a 'variant'. The artifacts of a build will include the architecture and variant name. For example, an x86_64 build of the aws-k8s-1.24 variant will produce an image named bottlerocket-aws-k8s-1.24-x86_64-<version>-<commit>.img.

The following variants support EKS, as described above:

aws-k8s-1.23
aws-k8s-1.24
aws-k8s-1.25
aws-k8s-1.26
aws-k8s-1.27
aws-k8s-1.23-nvidia
aws-k8s-1.24-nvidia
aws-k8s-1.25-nvidia
aws-k8s-1.26-nvidia
aws-k8s-1.27-nvidia

The following variants support ECS:

aws-ecs-1
aws-ecs-1-nvidia

We also have variants that are designed to be Kubernetes worker nodes in VMware:

vmware-k8s-1.23
vmware-k8s-1.24
vmware-k8s-1.25
vmware-k8s-1.26
vmware-k8s-1.27

The following variants are designed to be Kubernetes worker nodes on bare metal:

metal-k8s-1.23
metal-k8s-1.24
metal-k8s-1.25
metal-k8s-1.26
metal-k8s-1.27

The following variants are no longer supported:

All Kubernetes variants using Kubernetes 1.22 and earlier

We recommend users replace nodes running these variants with the latest variant compatible with their cluster.

Architectures

Our supported architectures include x86_64 and aarch64 (written as arm64 in some contexts).

Setup

🚶 🏃

Bottlerocket is best used with a container orchestrator. To get started with Kubernetes in Amazon EKS, please see QUICKSTART-EKS. To get started with Kubernetes in VMware, please see QUICKSTART-VMWARE. To get started with Amazon ECS, please see QUICKSTART-ECS. These guides describe:

how to set up a cluster with the orchestrator, so your Bottlerocket instance can run containers
how to launch a Bottlerocket instance in EC2 or VMware

To see how to provision Bottlerocket on bare metal, see PROVISIONING-METAL.

To build your own Bottlerocket images, please see BUILDING. It describes:

how to build an image
how to register an EC2 AMI from an image

To publish your built Bottlerocket images, please see PUBLISHING. It describes:

how to make TUF repos including your image
how to copy your AMI across regions
how to mark your AMIs public or grant access to specific accounts
how to make your AMIs discoverable using SSM parameters

Exploration

To improve security, there's no SSH server in a Bottlerocket image, and not even a shell.

Don't panic!

There are a couple out-of-band access methods you can use to explore Bottlerocket like you would a typical Linux system. Either option will give you a shell within Bottlerocket. From there, you can change settings, manually update Bottlerocket, debug problems, and generally explore.

Note: These methods require that your instance has permission to access the ECR repository where these containers live; the appropriate policy to add to your instance's IAM role is AmazonEC2ContainerRegistryReadOnly.

Control container

Bottlerocket has a "control" container, enabled by default, that runs outside of the orchestrator in a separate instance of containerd. This container runs the AWS SSM agent that lets you run commands, or start shell sessions, on Bottlerocket instances in EC2. (You can easily replace this control container with your own just by changing the URI; see Settings.)

In AWS, you need to give your instance the SSM role for this to work; see the setup guide. Outside of AWS, you can use AWS Systems Manager for hybrid environments. There's more detail about hybrid environments in the control container documentation.

Once the instance is started, you can start a session:

Go to AWS SSM's Session Manager
Select "Start session" and choose your Bottlerocket instance
Select "Start session" again to get a shell

If you prefer a command-line tool, you can start a session with a recent AWS CLI and the session-manager-plugin. Then you'd be able to start a session using only your instance ID, like this:

aws ssm start-session --target INSTANCE_ID

With the default control container, you can make API calls to configure and manage your Bottlerocket host. To do even more, read the next section about the admin container. You can access the admin container from the control container like this:

enter-admin-container

Admin container

Bottlerocket has an administrative container, disabled by default, that runs outside of the orchestrator in a separate instance of containerd. This container has an SSH server that lets you log in as ec2-user using your EC2-registered SSH key. Outside of AWS, you can pass in your own SSH keys. (You can easily replace this admin container with your own just by changing the URI; see Settings.

To enable the container, you can change the setting in user data when starting Bottlerocket, for example EC2 instance user data:

[settings.host-containers.admin]
enabled = true

If Bottlerocket is already running, you can enable the admin container from the default control container like this:

enable-admin-container

Or you can start an interactive session immediately like this:

enter-admin-container

If you're using a custom control container, or want to make the API calls directly, you can enable the admin container like this instead:

apiclient set host-containers.admin.enabled=true

Once you've enabled the admin container, you can either access it through SSH or execute commands from the control container like this:

apiclient exec admin bash

Once you're in the admin container, you can run sheltie to get a full root shell in the Bottlerocket host. Be careful; while you can inspect and change even more as root, Bottlerocket's filesystem and dm-verity setup will prevent most changes from persisting over a restart - see Security.

Updates

Rather than a package manager that updates individual pieces of software, Bottlerocket downloads a full filesystem image and reboots into it. It can automatically roll back if boot failures occur, and workload failures can trigger manual rollbacks.

The update process uses images secured by TUF. For more details, see the update system documentation.

Update methods

There are several ways of updating your Bottlerocket hosts. We provide tools for automatically updating hosts, as well as an API for direct control of updates.

Automated updates

For EKS variants of Bottlerocket, we recommend using the Bottlerocket update operator for automated updates.

For the ECS variant of Bottlerocket, we recommend using the Bottlerocket ECS updater for automated updates.

Update API

The Bottlerocket API includes methods for checking and starting system updates. You can read more about the update APIs in our update system documentation.

apiclient knows how to handle those update APIs for you, and you can run it from the control or admin containers.

To see what updates are available:

apiclient update check

If an update is available, it will show up in the chosen_update field. The available_updates field will show the full list of available versions, including older versions, because Bottlerocket supports safely rolling back.

To apply the latest update:

apiclient update apply

The next time you reboot, you'll start up in the new version, and system configuration will be automatically migrated. To reboot right away:

apiclient reboot

If you're confident about updating, the apiclient update apply command has --check and --reboot flags to combine the above actions, so you can accomplish all of the above steps like this:

apiclient update apply --check --reboot

See the apiclient documentation for more details.

Update rollback

The system will automatically roll back if it's unable to boot. If the update is not functional for a given container workload, you can do a manual rollback:

signpost rollback-to-inactive
reboot

This doesn't require any external communication, so it's quicker than apiclient, and it's made to be as reliable as possible.

Settings

Here we'll describe the settings you can configure on your Bottlerocket instance, and how to do it.

(API endpoints are defined in our OpenAPI spec if you want more detail.)

Interacting with settings

Using the API client

You can see the current settings with an API request:

apiclient get settings

This will return all of the current settings in JSON format. For example, here's an abbreviated response:

{"motd": "...", {"kubernetes": {}}}

You can change settings like this:

apiclient set motd="hi there" kubernetes.node-labels.environment=test

You can also use a JSON input mode to help change many related settings at once, and a "raw" mode if you want more control over how the settings are committed and applied to the system. See the apiclient README for details.

Using user data

If you know what settings you want to change when you start your Bottlerocket instance, you can send them in the user data.

In user data, we structure the settings in TOML form to make things a bit simpler. Here's the user data to change the message of the day setting, as we did in the last section:

[settings]
motd = "my own value!"

If your user data is over the size limit of the platform (e.g. 16KiB for EC2) you can compress the contents with gzip. (With aws-cli, you can use --user-data fileb:///path/to/gz-file to pass binary data.)

Description of settings

Here we'll describe each setting you can change.

Note: You can see the default values (for any settings that are not generated at runtime) by looking in the defaults.d directory for a variant, for example aws-ecs-1.

When you're sending settings to the API, or receiving settings from the API, they're in a structured JSON format. This allows modification of any number of keys at once. It also lets us ensure that they fit the definition of the Bottlerocket data model - requests with invalid settings won't even parse correctly, helping ensure safety.

Here, however, we'll use the shortcut "dotted key" syntax for referring to keys. This is used in some API endpoints with less-structured requests or responses. It's also more compact for our needs here.

In this format, "settings.kubernetes.cluster-name" refers to the same key as in the JSON {"settings": {"kubernetes": {"cluster-name": "value"}}}.

Top-level settings

settings.motd: This setting is just written out to /etc/motd. It's useful as a way to get familiar with the API! Try changing it.

Kubernetes settings

See the EKS setup guide for much more detail on setting up Bottlerocket and Kubernetes in AWS EKS. For more details about running Bottlerocket as a Kubernetes worker node in VMware, see the VMware setup guide.

The following settings must be specified in order to join a Kubernetes cluster. You should specify them in user data.

settings.kubernetes.api-server: This is the cluster's Kubernetes API endpoint.
settings.kubernetes.cluster-certificate: This is the base64-encoded certificate authority of the cluster.

For Kubernetes variants in AWS, you must also specify:

settings.kubernetes.cluster-name: The cluster name you chose during setup; the setup guide uses "bottlerocket".

For Kubernetes variants in VMware, you must specify:

settings.kubernetes.bootstrap-token: The token used for TLS bootstrapping.

The following settings can be optionally set to customize the node labels and taints. Remember to quote keys (since they often contain ".") and to quote all values.

settings.kubernetes.cluster-dns-ip: The IP of the DNS service running in the cluster.

This value can be set as a string containing a single IP address, or as a list containing multiple IP addresses.

Examples:
```
# Valid, single IP
[settings.kubernetes]
"cluster-dns-ip" = "10.0.0.1"

# Also valid, multiple nameserver IPs
[settings.kubernetes]
"cluster-dns-ip" = ["10.0.0.1", "10.0.0.2"]
```
settings.kubernetes.node-labels: Labels in the form of key, value pairs added when registering the node in the cluster.

settings.kubernetes.node-taints: Taints in the form of key, values and effects entries added when registering the node in the cluster.

Example user data for setting up labels and taints:

[settings.kubernetes.node-labels]
"label1" = "foo"
"label2" = "bar"
[settings.kubernetes.node-taints]
"dedicated" = ["experimental:PreferNoSchedule", "experimental:NoExecute"]
"special" = ["true:NoSchedule"]

The following settings are optional and allow you to further configure your cluster.

settings.kubernetes.allowed-unsafe-sysctls: Enables specified list of unsafe sysctls.

Example user data for setting up allowed unsafe sysctls:
```
allowed-unsafe-sysctls = ["net.core.somaxconn", "net.ipv4.ip_local_port_range"]
```
settings.kubernetes.authentication-mode: Which authentication method the kubelet should use to connect to the API server, and for incoming requests. Defaults to aws for AWS variants, and tls for other variants.
settings.kubernetes.bootstrap-token: The token to use for TLS bootstrapping. This is only used with the tls authentication mode, and is otherwise ignored.
settings.kubernetes.cloud-provider: The cloud provider for this cluster. Defaults to aws for AWS variants, and external for other variants.
settings.kubernetes.cluster-domain: The DNS domain for this cluster, allowing all Kubernetes-run containers to search this domain before the host's search domains. Defaults to cluster.local.
settings.kubernetes.container-log-max-files: The maximum number of container log files that can be present for a container.
settings.kubernetes.container-log-max-size: The maximum size of container log file before it is rotated.
settings.kubernetes.cpu-cfs-quota-enforced: Whether CPU CFS quotas are enforced. Defaults to true.
settings.kubernetes.cpu-manager-policy: Specifies the CPU manager policy. Possible values are static and none. Defaults to none. If you want to allow pods with certain resource characteristics to be granted increased CPU affinity and exclusivity on the node, you can set this setting to static. You should reboot if you change this setting after startup - try apiclient reboot.
settings.kubernetes.cpu-manager-policy-options: Policy options to apply when cpu-manager-policy is set to static. Currently full-pcpus-only is the only option.

For example:
```
[settings.kubernetes]
cpu-manager-policy = "static"
cpu-manager-policy-options = [
  "full-pcpus-only"
]
```
settings.kubernetes.cpu-manager-reconcile-period: Specifies the CPU manager reconcile period, which controls how often updated CPU assignments are written to cgroupfs. The value is a duration like 30s for 30 seconds or 1h5m for 1 hour and 5 minutes.

settings.kubernetes.credential-providers: Contains a collection of Kubelet image credential provider settings. Each name under credential-providers is the name of the plugin to configure.

Example user data for configuring the ecr-credential-provider credential provider plugin:

[settings.kubernetes.credential-providers.ecr-credential-provider]
enabled = true
# (optional - defaults to "12h")
cache-duration = "30m"
image-patterns = [
  # One or more URL paths to match an image prefix. Supports globbing of subdomains.
  "*.dkr.ecr.us-east-2.amazonaws.com",
  "*.dkr.ecr.us-west-2.amazonaws.com"
]

[settings.kubernetes.credential-providers.ecr-credential-provider.environment]
# The following are not used with ecr-credential-provider, but are provided for illustration
"KEY" = "abc123xyz"
"GOMAXPROCS" = "2"

Note: ecr-credential-provider is currently the only supported provider. To manage its AWS credentials, see the settings.aws.config and settings.aws.credentials settings.

The ecr-credential-provider plugin can also be used for AWS IAM Roles Anywhere support. IAM Roles Anywhere is configured using the settings.aws.config setting. The content of that setting needs to configure the credential_process using the aws_signing_helper using your IAM Roles Anywhere settings, similar to the following:

[default]
region = us-west-2
credential_process = aws_signing_helper credential-process \
   --certificate /var/lib/kubelet/pki/kubelet-client-current.pem \
   --private-key /var/lib/kubelet/pki/kubelet-client-current.pem \
   --profile-arn [profile ARN]
   --role-arn [role ARN]
   --trust-anchor-arn [trust anchor ARN]

See the Roles Anywhere documentation for more details on the aws_signing_helper arguments.

settings.kubernetes.event-burst: The maximum size of a burst of event creations.
settings.kubernetes.event-qps: The maximum event creations per second.
settings.kubernetes.eviction-hard: The signals and thresholds that trigger pod eviction.
settings.kubernetes.eviction-max-pod-grace-period: Maximum grace period, in seconds, to wait for pod termination before soft eviction. Default is 0.
settings.kubernetes.eviction-soft: The signals and thresholds that trigger pod eviction with a provided grace period.

settings.kubernetes.eviction-soft-grace-period: Delay for each signal to wait for pod termination before eviction.

Remember to quote signals (since they all contain ".") and to quote all values.

Example user data for setting up eviction values:

[settings.kubernetes.eviction-hard]
"memory.available" = "15%"

[settings.kubernetes.eviction-soft]
"memory.available" = "12%"

[settings.kubernetes.eviction-soft-grace-period]
"memory.available" = "30s"

[settings.kubernetes]
"eviction-max-pod-grace-period" = 40

settings.kubernetes.image-gc-high-threshold-percent: The percent of disk usage after which image garbage collection is always run, expressed as an integer from 0-100 inclusive.
settings.kubernetes.image-gc-low-threshold-percent: The percent of disk usage before which image garbage collection is never run, expressed as an integer from 0-100 inclusive.

Since v1.14.0 image-gc-high-threshold-percent and image-gc-low-threshold-percent can be represented as numbers. For example:
```
[settings.kubernetes]
image-gc-high-threshold-percent = 85
image-gc-low-threshold-percent = 80
```
For backward compatibility, both string and numeric representations are accepted since v1.14.0. Prior to v1.14.0 these needed to be represented as strings, for example:
```
[settings.kubernetes]
image-gc-high-threshold-percent = "85"
image-gc-low-threshold-percent = "80"
```
If you downgrade from v1.14.0 to an earlier version, and you have these values set as numbers, they will be converted to strings on downgrade.
settings.kubernetes.kube-api-burst: The burst to allow while talking with kubernetes.
settings.kubernetes.kube-api-qps: The QPS to use while talking with kubernetes apiserver.
settings.kubernetes.log-level: Adjust the logging verbosity of the kubelet process. The default log level is 2, with higher numbers enabling more verbose logging.
settings.kubernetes.memory-manager-policy: The memory management policy to use: None (default) or Static. Note, when using the Static policy you should also set settings.kubernetes.memory-manager-reserved-memory values.
settings.kubernetes.memory-manager-reserved-memory: Used to set the total amount of reserved memory for a node. These settings are used to configure memory manager policy when settings.kubernetes.memory-manager-policy is set to Static.

memory-manager-reserved-memory is set per NUMA node. For example:
```
[settings.kubernetes]
"memory-manager-policy" = "Static"

[settings.kubernetes.memory-manager-reserved-memory.0]
# Reserve a single 1GiB huge page along with 674MiB of memory
"enabled" = true
"memory" = "674Mi"
"hugepages-1Gi" = "1Gi"

[settings.kubernetes.memory-manager-reserved-memory.1]
# Reserve 1,074 2MiB huge pages
"enabled" = true
"hugepages-2Mi" = "2148Mi"
```
Warning: memory-manager-reserved-memory settings are an advanced configuration and requires a clear understanding of what you are setting. Misconfiguration of reserved memory settings may cause the Kubernetes kubelet process to fail. It can be very difficult to recover from configuration errors. Use the memory reservation information from kubectl describe node and make sure you understand the Kubernetes documentation related to the memory manager and how to reserve compute resources for system daemons.
settings.kubernetes.pod-pids-limit: The maximum number of processes per pod.
settings.kubernetes.provider-id: This sets the unique ID of the instance that an external provider (i.e. cloudprovider) can use to identify a specific node.
settings.kubernetes.registry-burst: The maximum size of bursty pulls.
settings.kubernetes.registry-qps: The registry pull QPS.
settings.kubernetes.server-tls-bootstrap: Enables or disables server certificate bootstrap. When enabled, the kubelet will request a certificate from the certificates.k8s.io API. This requires an approver to approve the certificate signing requests (CSR). Defaults to true.
settings.kubernetes.shutdown-grace-period: Delay the node should wait for pod termination before shutdown. Default is 0s.
settings.kubernetes.shutdown-grace-period-for-critical-pods: The portion of the shutdown delay that should be dedicated to critical pod shutdown. Default is 0s.
settings.kubernetes.standalone-mode: Whether to run the kubelet in standalone mode, without connecting to an API server. Defaults to false.
settings.kubernetes.system-reserved: Resources reserved for system components.

Example user data for setting up system reserved:
```
[settings.kubernetes.system-reserved]
cpu = "10m"
memory = "100Mi"
ephemeral-storage= "1Gi"
```
settings.kubernetes.server-certificate: The base64 encoded content of an x509 certificate for the Kubelet web server, which is used for retrieving logs and executing commands.
settings.kubernetes.server-key: The base64 encoded content of an x509 private key for the Kubelet web server.
settings.kubernetes.topology-manager-policy: Specifies the topology manager policy. Possible values are none, restricted, best-effort, and single-numa-node. Defaults to none.
settings.kubernetes.topology-manager-scope: Specifies the topology manager scope. Possible values are container and pod. Defaults to container. If you want to group all containers in a pod to a common set of NUMA nodes, you can set this setting to pod.

You can also optionally specify static pods for your node with the following settings. Static pods can be particularly useful when running in standalone mode.

settings.kubernetes.static-pods.<custom identifier>.enabled: Whether the static pod is enabled.
settings.kubernetes.static-pods.<custom identifier>.manifest: A base64-encoded pod manifest.

For Kubernetes variants in AWS and VMware, the following are set for you automatically, but you can override them if you know what you're doing! In AWS, pluto sets these based on runtime instance information. In VMware and on bare metal, Bottlerocket uses netdog (for node-ip) or relies on default values. (See the VMware defaults or bare metal defaults).

settings.kubernetes.kube-reserved: Resources reserved for node components.

Bottlerocket provides default values for the resources by schnauzer:
- cpu: in millicores from the total number of vCPUs available on the instance.
- memory: in mebibytes from the max num of pods on the instance. memory_to_reserve = max_num_pods * 11 + 255.
- ephemeral-storage: defaults to 1Gi.
settings.kubernetes.node-ip: The IP address of this node.
settings.kubernetes.pod-infra-container-image: The URI of the "pause" container.

For Kubernetes variants in AWS, the following settings are set for you automatically by pluto.

settings.kubernetes.cluster-dns-ip: Derived from the EKS Service IP CIDR or the CIDR block of the primary network interface.
settings.kubernetes.max-pods: The maximum number of pods that can be scheduled on this node (limited by number of available IPv4 addresses)
settings.kubernetes.hostname-override: The node name kubelet uses as identification instead of the hostname or the name determined by the in-tree cloud provider if that's enabled.

Important note for all Kubernetes variants: Changing this setting at runtime (not via user-data) can cause issues with kubelet registration, as hostname is closely tied to the identity of the system for both registration and certificates/authorization purposes.

Most users don't need to change this setting. If left unset, the system hostname will be used instead. The settings.network.hostname setting can be used to specify the value for both kubelet and the host. Only set this override if you intend for the kubelet to register with a different name than the host.

For aws-k8s-1.26 variants, which use the "external" cloud provider, a hostname override will be automatically generated by querying the EC2 API for the private DNS name of the instance. This is done for backwards compatibility with the deprecated "aws" cloud provider, which adjusted the hostname in a similar way. Future aws-k8s-* variants may remove this behavior.

Amazon ECS settings

See the setup guide for much more detail on setting up Bottlerocket and ECS.

The following settings are optional and allow you to configure how your instance joins an ECS cluster. Since joining a cluster happens at startup, they need to be specified in user data.

settings.ecs.cluster: The name or ARN of your Amazon ECS cluster. If left unspecified, Bottlerocket will join your default cluster.
settings.ecs.instance-attributes: Attributes in the form of key, value pairs added when registering the container instance in the cluster.

Example user data for setting up attributes:
```
[settings.ecs.instance-attributes]
attribute1 = "foo"
attribute2 = "bar"
```

The following settings are optional and allow you to further configure your cluster. These settings can be changed at any time.

settings.ecs.allow-privileged-containers: Whether launching privileged containers is allowed on the container instance. If this value is set to false, privileged containers are not permitted. Bottlerocket sets this value to false by default.
settings.ecs.container-stop-timeout: Time to wait for the task's containers to stop on their own before they are forcefully stopped. Valid time units include s, m, and h, e.g. 1h, 1m1s.
settings.ecs.enable-spot-instance-draining: If the instance receives a spot termination notice, the agent will set the instance's state to DRAINING, so the workload can be moved gracefully before the instance is removed. Defaults to false.
settings.ecs.image-pull-behavior: The behavior used to customize the pull image process for your container instances. Supported values are default, always, once, prefer-cached, and the default is default.
settings.ecs.logging-drivers: The list of logging drivers available on the container instance. The ECS agent running on a container instance must register available logging drivers before tasks that use those drivers are eligible to be placed on the instance. Bottlerocket enables the json-file, awslogs, and none drivers by default.
settings.ecs.loglevel: The level of verbosity for the ECS agent's logs. Supported values are debug, info, warn, error, and crit, and the default is info.
settings.ecs.metadata-service-rps: The steady state rate limit of the throttling configurations set for the task metadata service.
settings.ecs.metadata-service-burst: The burst rate limit of the throttling configurations set for the task metadata service.
settings.ecs.reserved-memory: The amount of memory, in MiB, reserved for critical system processes.
settings.ecs.task-cleanup-wait: Time to wait before the task's containers are removed after they are stopped. Valid time units are s, m, and h, e.g. 1h, 1m1s.

Note: metadata-service-rps and metadata-service-burst directly map to the values set by the ECS_TASK_METADATA_RPS_LIMIT environment variable.

CloudFormation signal helper settings

For AWS variants, these settings allow you to set up CloudFormation signaling to indicate whether Bottlerocket hosts running in EC2 have been successfully created or updated:

settings.cloudformation.logical-resource-id: The logical ID of the AutoScalingGroup resource that you want to signal.
settings.cloudformation.should-signal: Whether to check status and send signal. Defaults to false. If set to true, both stack-name and logical-resource-id need to be specified.
settings.cloudformation.stack-name: Name of the CloudFormation Stack to signal.

Auto Scaling group settings

settings.autoscaling.should-wait: Whether to wait for the instance to reach the InService state before the orchestrator agent joins the cluster. Defaults to false. Set this to true only if the instance is part of an Auto Scaling group, or will be attached to one later. For example:
```
[settings.autoscaling]
should-wait = true
```

OCI Hooks settings

Bottlerocket allows you to opt-in to use additional OCI hooks for your orchestrated containers. Once you opt-in to use additional OCI hooks, any new orchestrated containers will be configured with them, but existing containers won't be changed.

settings.oci-hooks.log4j-hotpatch-enabled: Enables the hotdog OCI hooks, which are used to inject the Log4j Hot Patch into containers. Defaults to false.

OCI Defaults settings

Bottlerocket allows you to customize certain parts of the default OCI spec that is applied to workload containers.

The following settings are available:

OCI Defaults: Capabilities

All of the capabilities settings below are boolean values (true/false).

The full list of capabilities that can be configured in Bottlerocket are as follows:

capability	setting	default value
`CAP_AUDIT_WRITE`	`settings.oci-defaults.capabilities.audit-write`	true
`CAP_CHOWN`	`settings.oci-defaults.capabilities.chown`	true
`CAP_DAC_OVERRIDE`	`settings.oci-defaults.capabilities.dac-override`	true
`CAP_FOWNER`	`settings.oci-defaults.capabilities.fowner`	true
`CAP_FSETID`	`settings.oci-defaults.capabilities.fsetid`	true
`CAP_KILL`	`settings.oci-defaults.capabilities.kill`	true
`CAP_MKNOD`	`settings.oci-defaults.capabilities.mknod`	true
`CAP_NET_BIND_SERVICE`	`settings.oci-defaults.capabilities.net-bind-service`	true
`CAP_SETGID`	`settings.oci-defaults.capabilities.setgid`	true
`CAP_SETFCAP`	`settings.oci-defaults.capabilities.setfcap`	true
`CAP_SETPCAP`	`settings.oci-defaults.capabilities.setpcap`	true
`CAP_SETUID`	`settings.oci-defaults.capabilities.setuid`	true
`CAP_SYS_CHROOT`	`settings.oci-defaults.capabilities.sys-chroot`	true
`CAP_AUDIT_CONTROL`	`settings.oci-defaults.capabilities.audit-control`	-
`CAP_AUDIT_READ`	`settings.oci-defaults.capabilities.audit-read`	-
`CAP_BLOCK_SUSPEND`	`settings.oci-defaults.capabilities.block-suspend`	-
`CAP_BPF`	`settings.oci-defaults.capabilities.bpf`	-
`CAP_CHECKPOINT_RESTORE`	`settings.oci-defaults.capabilities.checkpoint-restore`	-
`CAP_DAC_READ_SEARCH`	`settings.oci-defaults.capabilities.dac-read-search`	-
`CAP_IPC_LOCK`	`settings.oci-defaults.capabilities.ipc-lock`	-
`CAP_IPC_OWNER`	`settings.oci-defaults.capabilities.ipc-owner`	-
`CAP_LEASE`	`settings.oci-defaults.capabilities.lease`	-
`CAP_LINUX_IMMUTABLE`	`settings.oci-defaults.capabilities.linux-immutable`	-
`CAP_MAC_ADMIN`	`settings.oci-defaults.capabilities.mac-admin`	-
`CAP_MAC_OVERRIDE`	`settings.oci-defaults.capabilities.mac-override`	-
`CAP_NET_ADMIN`	`settings.oci-defaults.capabilities.net-admin`	-
`CAP_NET_BROADCAST`	`settings.oci-defaults.capabilities.net-broadcast`	-
`CAP_NET_RAW`	`settings.oci-defaults.capabilities.net-raw`	-
`CAP_PERFMON`	`settings.oci-defaults.capabilities.perfmon`	-
`CAP_SYS_ADMIN`	`settings.oci-defaults.capabilities.sys-admin`	-
`CAP_SYS_BOOT`	`settings.oci-defaults.capabilities.sys-boot`	-
`CAP_SYS_MODULE`	`settings.oci-defaults.capabilities.sys-module`	-
`CAP_SYS_NICE`	`settings.oci-defaults.capabilities.sys-nice`	-
`CAP_SYS_PACCT`	`settings.oci-defaults.capabilities.sys-pacct`	-
`CAP_SYS_PTRACE`	`settings.oci-defaults.capabilities.sys-ptrace`	-
`CAP_SYS_RAWIO`	`settings.oci-defaults.capabilities.sys-rawio`	-
`CAP_SYS_RESOURCE`	`settings.oci-defaults.capabilities.sys-resource`	-
`CAP_SYS_TIME`	`settings.oci-defaults.capabilities.sys-time`	-
`CAP_SYS_TTY_CONFIG`	`settings.oci-defaults.capabilities.sys-tty-config`	-
`CAP_SYSLOG`	`settings.oci-defaults.capabilities.syslog`	-
`CAP_WAKE_ALARM`	`settings.oci-defaults.capabilities.wake-alarm`	-

OCI Defaults: Resource Limits

Each of the resource-limits settings below contain two numeric fields: hard-limit and soft-limit, which are 32-bit unsigned integers.

Please see the getrlimit linux manpage for meanings of hard-limit and soft-limit.

The full list of resource limits that can be configured in Bottlerocket are:

resource limit	setting	default value
`RLIMIT_NOFILE`	`settings.oci-defaults.resource-limits.max-open-files.hard-limit`	1048576
`RLIMIT_NOFILE`	`settings.oci-defaults.resource-limits.max-open-files.soft-limit`	65536

Container image registry settings

The following setting is optional and allows you to configure image registry mirrors and pull-through caches for your containers.

settings.container-registry.mirrors: An array of container image registry mirror settings. Each element specifies the registry and the endpoints for said registry. When pulling an image from a registry, the container runtime will try the endpoints one by one and use the first working one. (Docker and containerd will still try the default registry URL if the mirrors fail.)

Example user data for setting up image registry mirrors:
```
[[settings.container-registry.mirrors]]
registry = "*"
endpoint = ["https://<example-mirror>","https://<example-mirror-2>"]

[[settings.container-registry.mirrors]]
registry = "docker.io"
endpoint = [ "https://<my-docker-hub-mirror-host>", "https://<my-docker-hub-mirror-host-2>"]
```
If you use a Bottlerocket variant that uses Docker as the container runtime, like aws-ecs-1, you should be aware that Docker only supports pull-through caches for images from Docker Hub (docker.io). Mirrors for other registries are ignored in this case.

For host-container and bootstrap-container images from Amazon ECR private repositories, registry mirrors are currently unsupported.

The following setting is optional and allows you to configure image registry credentials.

settings.container-registry.credentials: An array of container images registry credential settings. Each element specifies the registry and the credential information for said registry. The credential fields map to containerd's registry credential fields, which in turn map to the fields in .docker/config.json.

To avoid storing plaintext credentials in external systems, it is recommended to programmatically apply these settings via apiclient using a bootstrap container or host container.

Example apiclient call to set registry credentials for gcr.io and docker.io:

apiclient set --json '{
  "container-registry": {
    "credentials": [
      {
        "registry": "gcr.io",
        "username": "example_username",
        "password": "example_password"
      },
      {
        "registry": "docker.io",
        "auth": "example_base64_encoded_auth_string"
      }
    ]
  }
}'

Example user data for setting up image registry credentials:

[[settings.container-registry.credentials]]
registry = "docker.io"
username = "foo"
password = "bar"

[[settings.container-registry.credentials]]
registry = "gcr.io"
auth = "example_base64_encoded_auth_string"

In addition to the container runtime daemons, these credential settings will also apply to host-container and bootstrap-container image pulls as well.

Container runtime settings

Some behavior of the container runtime (currently containerd) can be modified with the following settings:

settings.container-runtime.enable-unprivileged-icmp: Allow unprivileged containers to open ICMP echo sockets.
settings.container-runtime.enable-unprivileged-ports: Allow unprivileged containers to bind to ports < 1024.
settings.container-runtime.max-concurrent-downloads: Restricts the number of concurrent layer downloads for each image.
settings.container-runtime.max-container-log-line-size: Controls how long container log messages can be. If the log output is longer than the limit, the log message will be broken into multiple lines.

Example container runtime settings:

[settings.container-runtime]
# Set log line length to unlimited
max-container-log-line-size = -1
max-concurrent-downloads = 4
enable-unprivileged-icmp = true
enable-unprivileged-ports = true

Updates settings

settings.updates.ignore-waves: Updates are rolled out in waves to reduce the impact of issues. For testing purposes, you can set this to true to ignore those waves and update immediately.
settings.updates.metadata-base-url: The common portion of all URIs used to download update metadata.
settings.updates.seed: A u32 value that determines how far into the update schedule this machine will accept an update. We recommend leaving this at its default generated value so that updates can be somewhat randomized in your cluster.
settings.updates.targets-base-url: The common portion of all URIs used to download update files.
settings.updates.version-lock: Controls the version that will be selected when you issue an update request. Can be locked to a specific version like v1.0.0, or latest to take the latest available version. Defaults to latest.

Network settings

settings.network.hostname: The desired hostname of the system.

Important note for all Kubernetes variants: Changing this setting at runtime (not via user data) can cause issues with kubelet registration, as hostname is closely tied to the identity of the system for both registration and certificates/authorization purposes.

Most users don't need to change this setting as the following defaults work for the majority of use cases. If this setting isn't set we attempt to use DNS reverse lookup for the hostname. If the lookup is unsuccessful, the IP of the node is used.
settings.network.hosts: A mapping of IP addresses to domain names which should resolve to those IP addresses. This setting results in modifications to the /etc/hosts file for Bottlerocket.

Note that this setting does not typically impact name resolution for containers, which usually rely on orchestrator-specific mechanisms for configuring static resolution. (See ECS and Kubernetes documentation for those mechanisms.)

Example:
```
[settings.network]
hosts = [
 ["10.0.0.0", ["test.example.com", "test1.example.com"]],
 ["10.1.1.1", ["test2.example.com"]]
]
```
This example would result in an /etc/hosts file entries like so:
```
10.0.0.0 test.example.com test1.example.com
10.1.1.1 test2.example.com
```
Repeated entries are merged (including loopback entries), with the first aliases listed taking precedence. e.g.:
```
[settings.network]
hosts = [
 ["10.0.0.0", ["test.example.com", "test1.example.com"]],
 ["10.1.1.1", ["test2.example.com"]],
 ["10.0.0.0", ["test3.example.com"]],
]
```
Would result in /etc/hosts entries like so:
```
10.0.0.0 test.example.com test1.example.com test3.example.com
10.1.1.1 test2.example.com
```

The following allows for custom DNS settings, which are used to generate the /etc/resolv.conf. If either DNS setting is not populated, the system will use the DHCP lease of the primary interface to gather these setings. See the resolv.conf man page for more detail.

settings.dns.name-servers: An array of IP address strings that represent the desired name server(s).
settings.dns.search-list: An array of domain strings that represent the desired domain search path(s).
```
[settings.dns]
name-servers = ["1.2.3.4", "5.6.7.8"]
search-list = ["foo.bar", "baz.foo"]
```

Proxy settings

These settings will configure the proxying behavior of the following services:

For all variants:
- containerd.service
- host-containerd.service
For Kubernetes variants:
- kubelet.service
For the ECS variant:
- docker.service
- ecs.service
settings.network.https-proxy: The HTTPS proxy server to be used by services listed above.

settings.network.no-proxy: A list of hosts that are excluded from proxying.

Example:

[settings.network]
https-proxy = "1.2.3.4:8080"
no-proxy = ["localhost", "127.0.0.1"]

The no-proxy list will automatically include entries for localhost.

If you're running a Kubernetes variant, the no-proxy list will automatically include the Kubernetes API server endpoint and other commonly used Kubernetes DNS suffixes to facilitate intra-cluster networking.

Metrics settings

By default, Bottlerocket sends anonymous metrics when it boots, and once every six hours. This can be disabled by setting send-metrics to false. Here are the metrics settings:

settings.metrics.metrics-url: The endpoint to which metrics will be sent. The default is https://metrics.bottlerocket.aws/v1/metrics.
settings.metrics.send-metrics: Whether Bottlerocket will send anonymous metrics.
settings.metrics.service-checks: A list of systemd services that will be checked to determine whether a host is healthy.

Time settings

settings.ntp.time-servers: A list of NTP servers used to set and verify the system time.

Kernel settings

settings.kernel.lockdown: This allows further restrictions on what the Linux kernel will allow, for example preventing the loading of unsigned modules. May be set to "none" (the default in *-nvidia and *-dev variants), "integrity" (the default for other variants), or "confidentiality". Important note: this setting cannot be lowered (toward 'none') at runtime. You must reboot for a change to a lower level to take effect.
settings.kernel.modules.<name>.allowed: Whether the named kernel module is allowed to be loaded. Important note: this setting does not affect kernel modules that are already loaded. You may need to reboot for a change to disallow a kernel module to take effect.

Example user data for blocking kernel modules:
```
[settings.kernel.modules.sctp]
allowed = false

[settings.kernel.modules.udf]
allowed = false
```
settings.kernel.sysctl: Key/value pairs representing Linux kernel parameters. Remember to quote keys (since they often contain ".") and to quote all values.

Example user data for setting up sysctl:
```
[settings.kernel.sysctl]
"user.max_user_namespaces" = "16384"
"vm.max_map_count" = "262144"
```

Boot-related settings

Please note that boot settings currently only exist for the bare metal variants and *-k8s-1.23 variants. Boot settings will be added to any future variant introduced after Bottlerocket v1.8.0.

Specifying any of the following settings will generate a kernel boot config file to be loaded on subsequent boots:

settings.boot.init-parameters: This allows additional init parameters to be specified on the kernel command line during boot.
settings.boot.kernel-parameters: This allows additional kernel parameters to be specified on the kernel command line during boot.
settings.boot.reboot-to-reconcile: If set to true, Bottlerocket will automatically reboot again during boot if either the settings.boot.kernel-parameters or settings.boot.init-parameters were changed via user data or a bootstrap container so that these changes may take effect.

You can learn more about kernel boot configuration here.

Example user data for specifying boot settings:

[settings.boot]
reboot-to-reconcile = true

[settings.boot.kernel-parameters]
"console" = [
  "tty0",
  "ttyS1,115200n8",
]
"crashkernel" = [
  "2G-:256M",
]
"slub_debug" = [
  "options,slabs",
]
"usbcore.quirks" = [
  "0781:5580:bk",
  "0a5c:5834:gij",
]

[settings.boot.init-parameters]
"log_level" = ["debug"]
"splash" = []

If boot config data exists at /proc/bootconfig, it will be used to generate these API settings on first boot. Please note that Bottlerocket only supports boot configuration for kernel and init. If any other boot config key is specified, the settings generation will fail.

Custom CA certificates settings

By default, Bottlerocket ships with the Mozilla CA certificate store, but you can add self-signed certificates through the API using these settings:

settings.pki.<bundle-name>.data: Base64-encoded PEM-formatted certificates bundle; it can contain more than one certificate
settings.pki.<bundle-name>.trusted: Whether the certificates in the bundle are trusted; defaults to false when not provided

Here's an example of adding a bundle of self-signed certificates as user data:

[settings.pki.my-trusted-bundle]
data="W3N..."
trusted=true

[settings.pki.dont-trust-these]
data="W3N..."
trusted=false

Here's the same example but using API calls:

apiclient set \
  pki.my-trusted-bundle.data="W3N..." \
  pki.my-trusted-bundle.trusted=true  \
  pki.dont-trust-these.data="N3W..."  \
  pki.dont-trust-there.trusted=false

You can use this method from within a bootstrap container, if your user data is over the size limit of the platform.

Host containers settings

settings.host-containers.admin.enabled: Whether the admin container is enabled.
settings.host-containers.admin.source: The URI of the admin container.
settings.host-containers.admin.superpowered: Whether the admin container has high levels of access to the Bottlerocket host.
settings.host-containers.control.enabled: Whether the control container is enabled.
settings.host-containers.control.source: The URI of the control container.
settings.host-containers.control.superpowered: Whether the control container has high levels of access to the Bottlerocket host.

Custom host containers

admin and control are our default host containers, but you're free to change this. Beyond just changing the settings above to affect the admin and control containers, you can add and remove host containers entirely. As long as you define the three fields above -- source with a URI, and enabled and superpowered with true/false -- you can add host containers with an API call or user data.

You can optionally define a user-data field with arbitrary base64-encoded data, which will be made available in the container at /.bottlerocket/host-containers/$HOST_CONTAINER_NAME/user-data and (since Bottlerocket v1.0.8) /.bottlerocket/host-containers/current/user-data. (It was inspired by instance user data, but is entirely separate; it can be any data your host container feels like interpreting.)

Keep in mind that the default admin container (since Bottlerocket v1.0.6) relies on user-data to store SSH keys. You can set user-data to customize the keys, or you can use it for your own purposes in a custom container.

Here's an example of adding a custom host container with API calls:

apiclient set \
  host-containers.custom.source=MY-CONTAINER-URI \
  host-containers.custom.enabled=true \
  host-containers.custom.superpowered=false

Here's the same example, but with the settings you'd add to user data:

[settings.host-containers.custom]
enabled = true
source = "MY-CONTAINER-URI"
superpowered = false

If the enabled flag is true, it will be started automatically.

All host containers will have the apiclient binary available at /usr/local/bin/apiclient so they're able to interact with the API. You can also use apiclient to run programs in other host containers. For example, to access the admin container:

apiclient exec admin bash

In addition, all host containers come with persistent storage that survives reboots and container start/stop cycles. It's available at /.bottlerocket/host-containers/$HOST_CONTAINER_NAME and (since Bottlerocket v1.0.8) /.bottlerocket/host-containers/current. The default admin host-container, for example, stores its SSH host keys under /.bottlerocket/host-containers/admin/etc/ssh/.

There are a few important caveats to understand about host containers:

They're not orchestrated. They only start or stop according to that enabled flag.
They run in a separate instance of containerd than the one used for orchestrated containers like Kubernetes pods.
They're not updated automatically. You need to update the source and commit those changes.
If you set superpowered to true, they'll essentially have root access to the host.

Because of these caveats, host containers are only intended for special use cases. We use them for the control container because it needs to be available early to give you access to the OS, and for the admin container because it needs high levels of privilege and because you need it to debug when orchestration isn't working.

Be careful, and make sure you have a similar low-level use case before reaching for host containers.

Bootstrap containers settings

settings.bootstrap-containers.<name>.essential: whether or not the container should fail the boot process, defaults to false
settings.bootstrap-containers.<name>.mode: the mode of the container, it could be one of off, once or always. See below for a description of modes.
settings.bootstrap-containers.<name>.source: the image for the container
settings.bootstrap-containers.<name>.user-data: field with arbitrary base64-encoded data

Bootstrap containers are host containers that can be used to "bootstrap" the host before services like ECS Agent, Kubernetes, and Docker start.

Bootstrap containers are very similar to normal host containers; they come with persistent storage and with optional user data. Unlike normal host containers, bootstrap containers can't be treated as superpowered containers. However, bootstrap containers do have additional permissions that normal host containers do not have. Bootstrap containers have access to the underlying root filesystem on /.bottlerocket/rootfs as well as to all the devices in the host, and they are set up with the CAP_SYS_ADMIN capability. This allows bootstrap containers to create files, directories, and mounts that are visible to the host.

Bootstrap containers are set up to run after the systemd configured.target unit is active. The containers' systemd unit depends on this target (and not on any of the bootstrap containers' peers) which means that bootstrap containers will not execute in a deterministic order. The boot process will "wait" for as long as the bootstrap containers run. Bootstrap containers configured with essential=true will stop the boot process if they exit code is a non-zero value.

Bootstrap containers have three different modes:

always: with this setting, the container is executed on every boot.
off: the container won't run
once: with this setting, the container only runs on the first boot where the container is defined. Upon completion, the mode is changed to off.

Here's an example of adding a bootstrap container with API calls:

apiclient set \
  bootstrap-containers.bootstrap.source=MY-CONTAINER-URI \
  bootstrap-containers.bootstrap.mode=once \
  bootstrap-containers.bootstrap.essential=true

Here's the same example, but with the settings you'd add to user data:

[settings.bootstrap-containers.bootstrap]
source = "MY-CONTAINER-URI"
mode = "once"
essential = true

Mount propagations in bootstrap and superpowered containers

Both bootstrap and superpowered host containers are configured with the /.bottlerocket/rootfs/mnt bind mount that points to /mnt in the host, which itself is a bind mount of /local/mnt. This bind mount is set up with shared propagations, so any new mount point created underneath /.bottlerocket/rootfs/mnt in any bootstrap or superpowered host container will propagate across mount namespaces. You can use this feature to configure ephemeral disks attached to your hosts that you may want to use on your workloads.

Platform-specific settings

Platform-specific settings are automatically set at boot time by early-boot-config based on metadata available on the running platform. They can be overridden for testing purposes in the same way as other settings.

AWS-specific settings

settings.aws.config: The base64 encoded content to use for AWS configuration (e.g. base64 -w0 ~/.aws/config).
settings.aws.credentials: The base64 encoded content to use for AWS credentials (e.g. base64 -w0 ~/.aws/credentials).
settings.aws.profile: The profile name to use from the provided config and credentials settings.

For example:
```
[settings.aws]
profile = "myprofile"
```
Note: If settings.aws.profile is not set, the setting will fallback to the "default" profile. In general it is recommended not to include a [profile default] section in the aws.config contents though. This may have unintended side effects for other AWS services running on the node (e.g. aws-iam-authenticator).

Note: The config, credentials, and profile are optional and do not need to be set when using an Instance Profile when running on an AWS instance.
settings.aws.region: This is set to the AWS region in which the instance is running, for example us-west-2.

The region setting is automatically inferred based on calls to the Instance MetaData Service (IMDS) when running within AWS. It does not need to be explicitly set unless you have a reason to override this default value.

Logs

You can use logdog through the admin container to obtain an archive of log files from your Bottlerocket host. SSH to the Bottlerocket host or apiclient exec admin bash to access the admin container, then run:

sudo sheltie
logdog

This will write an archive of the logs to /var/log/support/bottlerocket-logs.tar.gz. This archive is accessible from host containers at /.bottlerocket/support. You can use SSH to retrieve the file. Once you have exited from the Bottlerocket host, run a command like:

ssh -i YOUR_KEY_FILE \
  ec2-user@YOUR_HOST \
  "cat /.bottlerocket/support/bottlerocket-logs.tar.gz" > bottlerocket-logs.tar.gz

(If your instance isn't accessible through SSH, you can use SSH over SSM.)

For a list of what is collected, see the logdog command list.

Kdump Support

Bottlerocket provides support to collect kernel crash dumps whenever the system kernel panics. Once this happens, both the dmesg log and vmcore dump are stored at /var/log/kdump, and the system reboots.

There are a few important caveats about the provided kdump support:

Currently, only vmware variants have kdump support enabled
The system kernel will reserve 256MB for the crash kernel, only when the host has at least 2GB of memory; the reserved space won't be available for processes running in the host
The crash kernel will only be loaded when the crashkernel parameter is present in the kernel's cmdline and if there is memory reserved for it

NVIDIA GPUs Support

Bottlerocket's nvidia variants include the required packages and configurations to leverage NVIDIA GPUs. Currently, the following NVIDIA driver versions are supported in Bottlerocket:

470.X
515.X

The official AMIs for these variants can be used with EC2 GPU-equipped instance types such as: p2, p3, p4, g3, g4dn, g5 and g5g. Note that older instance types, such as p2, are not supported by NVIDIA driver 515.X and above. You need to make sure you select the appropriate AMI depending on the instance type you are planning to use. Please see QUICKSTART-EKS for further details about Kubernetes variants, and QUICKSTART-ECS for ECS variants.

Details

Security

🛡️ 🦀

To learn more about security features in Bottlerocket, please see SECURITY FEATURES. It describes how we use features like dm-verity and SELinux to protect the system from security threats.

To learn more about security recommendations for Bottlerocket, please see SECURITY GUIDANCE. It documents additional steps you can take to secure the OS, and includes resources such as a Pod Security Policy for your reference.

In addition, almost all first-party components are written in Rust. Rust eliminates some classes of memory safety issues, and encourages design patterns that help security.

Packaging

Bottlerocket is built from source using a container toolchain. We use RPM package definitions to build and install individual packages into an image. RPM itself is not in the image - it's just a common and convenient package definition format.

We currently package the following major third-party components:

Linux kernel (background, 5.10 packaging, 5.15 packaging)
glibc (background, packaging)
Buildroot as build toolchain (background, via the SDK)
GRUB, with patches for partition flip updates (background, packaging)
systemd as init (background, packaging)
wicked for networking (background, packaging)
containerd (background, packaging)
Kubernetes (background, packaging)
aws-iam-authenticator (background, packaging)
Amazon ECS agent (background, packaging)

For further documentation or to see the rest of the packages, see the packaging directory.

Updates

The Bottlerocket image has two identical sets of partitions, A and B. When updating Bottlerocket, the partition table is updated to point from set A to set B, or vice versa.

We also track successful boots, and if there are failures it will automatically revert back to the prior working partition set.

The update process uses images secured by TUF. For more details, see the update system documentation.

API

There are two main ways you'd interact with a production Bottlerocket instance. (There are a couple more exploration methods above for test instances.)

The first method is through a container orchestrator, for when you want to run or manage containers. This uses the standard channel for your orchestrator, for example a tool like kubectl for Kubernetes.

The second method is through the Bottlerocket API, for example when you want to configure the system.

There's an HTTP API server that listens on a local Unix-domain socket. Remote access to the API requires an authenticated transport such as SSM's RunCommand or Session Manager, as described above. For more details, see the apiserver documentation.

The apiclient can be used to make requests. They're just HTTP requests, but the API client simplifies making requests with the Unix-domain socket.

To make configuration easier, we have early-boot-config, which can send an API request for you based on instance user data. If you start a virtual machine, like an EC2 instance, it will read TOML-formatted Bottlerocket configuration from user data and send it to the API server. This way, you can configure your Bottlerocket instance without having to make API calls after launch.

See Settings above for examples and to understand what you can configure.

You can also access host containers through the API using apiclient exec.

The server and client are the user-facing components of the API system, but there are a number of other components that work together to make sure your settings are applied, and that they survive upgrades of Bottlerocket.

For more details, see the API system documentation.

Default Volumes

Bottlerocket operates with two default storage volumes.

The root device, holds the active and passive partition sets. It also contains the bootloader, the dm-verity hash tree for verifying the immutable root filesystem, and the data store for the Bottlerocket API.
The data device is used as persistent storage for container images, container orchestration, host-containers, and bootstrap containers.

On boot Bottlerocket will increase the data partition size to use all of the data device. If you increase the size of the device, you can reboot Bottlerocket to extend the data partition. If you need to extend the data partition without rebooting, have a look at this discussion.

Name		Name	Last commit message	Last commit date
Latest commit History 5,387 Commits
.github		.github
docs/design/settings/extensions		docs/design/settings/extensions
macros		macros
packages		packages
sources		sources
tools		tools
variants		variants
.dockerignore		.dockerignore
.gitignore		.gitignore
.golangci.yaml		.golangci.yaml
.mailmap		.mailmap
BUILDING.md		BUILDING.md
CHANGELOG.md		CHANGELOG.md
CHARTER.md		CHARTER.md
CODE_OF_CONDUCT.md		CODE_OF_CONDUCT.md
CONTRIBUTING.md		CONTRIBUTING.md
COPYRIGHT		COPYRIGHT
Dockerfile		Dockerfile
GLOSSARY.md		GLOSSARY.md
LICENSE-APACHE		LICENSE-APACHE
LICENSE-MIT		LICENSE-MIT
Makefile.toml		Makefile.toml
PROVISIONING-METAL.md		PROVISIONING-METAL.md
PUBLISHING-AWS.md		PUBLISHING-AWS.md
PUBLISHING-VMWARE.md		PUBLISHING-VMWARE.md
PUBLISHING.md		PUBLISHING.md
QUICKSTART-ECS.md		QUICKSTART-ECS.md
QUICKSTART-EKS.md		QUICKSTART-EKS.md
QUICKSTART-LOCAL.md		QUICKSTART-LOCAL.md
QUICKSTART-VMWARE.md		QUICKSTART-VMWARE.md
README.md		README.md
ROADMAP.md		ROADMAP.md
Release.toml		Release.toml
SECURITY.md		SECURITY.md
SECURITY_FEATURES.md		SECURITY_FEATURES.md
SECURITY_GUIDANCE.md		SECURITY_GUIDANCE.md
SUPPORTED-HARDWARE.md		SUPPORTED-HARDWARE.md
TESTING.md		TESTING.md
TRADEMARKS.md		TRADEMARKS.md
dependabot.yaml		dependabot.yaml
sample-eksctl-ssh.yaml		sample-eksctl-ssh.yaml
sample-eksctl.yaml		sample-eksctl.yaml

License

ermiaqasemi/bottlerocket

Folders and files

Latest commit

History

Repository files navigation

Bottlerocket OS

Participate in the Community

Contact us

Variants

Architectures

Setup

Exploration

Control container

Admin container

Updates

Update methods

Automated updates

Update API

Update rollback

Settings

Interacting with settings

Using the API client

Using user data

Description of settings

Top-level settings

Kubernetes settings

Amazon ECS settings

CloudFormation signal helper settings

Auto Scaling group settings

OCI Hooks settings

OCI Defaults settings

OCI Defaults: Capabilities

OCI Defaults: Resource Limits

Container image registry settings

Container runtime settings

Updates settings

Network settings

Proxy settings

Metrics settings

Time settings

Kernel settings

Boot-related settings

Custom CA certificates settings

Host containers settings

Custom host containers

Bootstrap containers settings

Mount propagations in bootstrap and superpowered containers

Platform-specific settings

AWS-specific settings

Logs

Kdump Support

NVIDIA GPUs Support

Details

Security

Packaging

Updates

API

Default Volumes

About

Resources

License

Stars

Watchers

Forks

Releases

Packages 0

Languages

Packages