Skip to content
This repository has been archived by the owner on Dec 21, 2019. It is now read-only.

enesbcs/sonoffdiy2mqtt

Repository files navigation

sonoffdiy2mqtt

Sonoff DIY mode devices to MQTT bridge (Sonoff Basic R3 and Sonoff Mini)

Installation

sudo apt install python3-pip 
git clone https://github.com/enesbcs/sonoffdiy2mqtt.git
cd sonoffdiy2mqtt
sudo pip3 install paho-mqtt requests zeroconf
python3 sonoffdiy2mqtt.py

Usage

At first run without much configuration the sonoffdiy2mqtt.py will write out to the console to the Sonoff DIY plug ID's that it found through mDNS.

1/ In the "sonoffdiy2mqtt.json" file the default mode is "mqtt_type": "domoticz". The Sonoff Device ID (ten character hexadecimal) has to be added to the "sonoff_device_id" fields and its correspondent Domoticz Dummy device IDX has to be added in the same line to the "outlet0" field. Default Publish Topic is "domoticz/in" and Subscribe is "domoticz/out", leave empty if you are not sure what you are doing.

Necessarry Domoticz Hardwares: "MQTT Client Gateway with Lan interface" and "Dummy"

2/ There are an other mode, if inside the "sonoffdiy2mqtt.json" file the "mqtt_type": "shelly" is setted then the sonoffdiy2mqtt script translates incoming mDNS messages to Shelly API compatible MQTT messages and paths, which can be intercepted by the Domoticz hardware "Shelly MQTT". ( https://github.com/enesbcs/Shelly_MQTT )

In this mode IDX is not required, but make sure to enable device self-learning.

Earlier Sonoff Device LAN mode support

https://github.com/enesbcs/sonofflan2mqtt

PayPal
donate
If you like this project, or you wants to support the development, you can do that with the paypal link above or by doing pull requests, if you knew Python language.
ko-fi

About

Sonoff DIY to MQTT bridge

Topics

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages