Tuya Smart ZigBee Door Window Contact Sensor adding/pairing

[panenka]

I'm novice and I've trying to add devices to deCONZ, HA. These sensors working in Tuya Zigbee wire gateway.
When I press reset hole, for a 5 seconds, red LED is blinking for a few second, maybe 3 second. In this time Tuya gateway adds devices without any problem.
Phoscon recognition is more difficult and I don't know what to do. But I think, that I see device in VNC console now.

https://www.aliexpress.com/item/4000475399821.html?spm=a2g0s.9042311.0.0.27424c4dl8B4HD
Brand Name: REHENTRONIX
Model Number: RH-ZDS2

[panenka]

I have two same devices as above from the same order, I'v been tried only first one.
From previous order I have another device, VNC shows same information except NWK and IEEE.
Looks similar.
https://www.aliexpress.com/item/10000008534724.html?spm=a2g0s.9042311.0.0.27424c4dl8B4HD
Model Number: WKD-D02
Zigbee variant oon that page.

Thanks a lot.

[SwoopX]

Please read the attributes from the basic cluster and share the modelId for both devices.

[panenka]

There was no other information, but a few minutes ago has been shown. Both different devices has same output. Attached. Dne ne 24. 5. 2020 16:04 uživatel SwoopX <notifications@github.com> napsal:

…

Please read the attributes from the basic cluster and share the modelId for both devices. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#2806 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ACL4KTQF6WJMX44L53T3XFDRTESPZANCNFSM4NI2SV7Q> .

[panenka]

[SwoopX]

Thanks, that was the info I was after. What is the exact definition of "difficult" and what's the actual issue anyway?

[panenka]

As I wrote above. I have 2 same sensors from one order (only one of them has been connected to Phoscon) and another one from another order. But I think that all sensors are the same. Dne ne 24. 5. 2020 21:32 uživatel SwoopX <notifications@github.com> napsal:

…

Thanks, that was the info I was after. What is the exact definition of "difficult" and what's the actual issue anyway? — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#2806 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ACL4KTUPILIRHJFUPGZ6IMTRTFY3HANCNFSM4NI2SV7Q> .

[SwoopX]

so?

Phoscon recognition is more difficult and I don't know what to do.

This is your issue description.

[panenka]

Sorry. Too late, tired. 1. Pairing. Why are some devices shown only in VNC view? Why are not shown as others? 2. Why are switches between lights? 3. Why is needed control buttons as prepared. For example one press means light on AND long press means adding intensity. Why is not possible to control this independently? There is possible to control double click, tripple click, quad click? 4. What to do, when something is not working? Where is correct place for discussion and support? GitHub? This discussion? Not sure. Dne ne 24. 5. 2020 22:00 uživatel SwoopX <notifications@github.com> napsal:

…

so? — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#2806 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ACL4KTU3R4GAMXN5DOYD4ULRTF4G7ANCNFSM4NI2SV7Q> .

[SwoopX]

Now we're talking.

1. That's the way it is. Phoscon is closed source and devices need to be added independently by DE. There's nothing we can do here.
2. Does that really matter? I assume random pick.
3. You mean in Phoscon? Not sure if I fully get your point. Generally, you can distinguish between the button presses as you described if the device supports it. Not sure though how that is reflected in Phoscon, as I don't use it.
4. Really depends on your issue. This is only for REST API and not for the other components. Chime in the Discord server: https://discord.gg/QFhTxqN

[panenka]

Please correct me, if I've understood this clearly. My sensors are the same like in #2559, ie. 0x0004 is Tuyatec, 0x0005 is RH3001? So these sensors has been added to newest release 3 days ago.
I've been updated to this version yesterday, but I don't see any changes. Sensors are only in mesh network (VNC) and nothing has been changed. What to do now? Pair it again?

[SwoopX]

I cannot really follow what you're after. The device(s) seem to have been paired alright. What do you expect?

[panenka]

After new pairing (two pairing for each device, first device needs 3 pairing, it doesn't show battery sensor) is everything ok.