The @dojo/stores repository has been deprecated and merged into @dojo/framework
You can read more about this change on our blog. We will continue providing patches for stores and other Dojo 2 repositories, and a CLI migration tool is available to aid in migrating projects from v2 to v3.
This library provides an application store designed to complement @dojo/widgets and @dojo/widget-core or any other reactive application.
To use @dojo/stores, install the package along with its required peer dependencies:
npm install @dojo/stores
# peer dependencies
npm install @dojo/core
npm install @dojo/has
npm install @dojo/shim
npm install @dojo/widget-core- Application state store designed to work with a reactive component architecture
- Out of the box support for asynchronous commands
- All state operations are recorded per process and undoable via a process callback
- Supports the optimistic pattern with the ability to roll back on a failure
- Fully serializable operations and state
Dojo 2 stores is a predictable, consistent state container for Javascript applications with inspiration from Redux and Flux architectures. However, the @dojo/stores package aims to provide more built-in support for common patterns such as asynchronous behaviors, undo support and more!
Managing state can become difficult to coordinate when an application becomes complicated with multiple views, widgets, components, and models. With each of these attempting to update attributes of state at varying points within the application lifecycle things can get confusing. When state changes are hard to understand and/or non-deterministic it becomes increasingly difficult to identify and reproduce bugs or add new features.
The @dojo/stores package provides a centralized store, designed to be the single source of truth for an application. It operates using uni-directional data flow. This means all application data follows the same lifecycle, ensuring the application logic is predictable and easy to understand.
Note: Do you need a centralized store? Lifting state up to parent widgets and using local state are likely to be sufficient in less complex applications.
To work with @dojo/stores there are three core but simple concepts - Operations, Commands, and Processes.
Operation- Granular instructions to manipulate state based on JSON Patch
Command- Simple functions that ultimately return operations needed to perform the required state change
Process- A function that executes a group of commands that usually represent a complete application behavior
Operations are the raw instructions the store uses to make modifications to the state. The operations are based on the JSON Patch and JSON Pointer specifications that have been customized specifically for Dojo 2 stores, primarily to prevent access to the state's root.
Dojo 2 stores support four of the six JSON Patch operations: "add", "remove", "replace", and "test". The "copy" and "move" operations are not currently supported. Each operation is a simple object which contains instructions with the OperationType, path and optionally the value (depending on operation).
import { OperationType } from '@dojo/stores/State/patch';
import { Pointer } from '@dojo/stores/state/Pointer';
const operations = [{
op: OperationType.ADD,
path: new Pointer('/foo'),
value: 'foo'
}, {
op: OperationType.REPLACE,
path: new Pointer('/bar'),
value: 'bar'
}, {
op: OperationType.REMOVE,
path: new Pointer('/qux')
}];Dojo 2 stores provides a helper package that can generate PatchOperation objects from @dojo/stores/state/operations:
add- Returns aPatchOperationof typeOperationType.ADDfor thepathandvalueremove- Returns aPatchOperationof typeOperationType.REMOVEfor thepathreplace- Returns aPatchOperationof typeOperationType.REPLACEfor thepathandvaluetest- Returns aPatchOperationof typeOperationType.TESTfor thepathandvalue
These functions accept a Path type. This is returned by the path and at methods on a store. More often this will be created using the path and at functions provided as part of the arguments to a command, which are described in more detail below. Rather than accepting a full string path, the path and at functions accept a series of arguments and provide type checking to verify that the path created actually exists on the state object.
Commands are simply functions which are called internally by the store when executing a Process and return an array of PatchOperations that tells the store what state changes needs to be performed.
Each command is passed a CommandRequest which provides path and at functions to generate Paths in a typesafe way, a get function for access to the store's state, and a payload object for the argument that the process executor was called with.
The get function returns back state for a given Path, for example get(path('my', 'deep', 'state')) or get(at(path('my', 'array', 'item'), 9)).
function addTodoCommand({ at, path, get, payload }: CommandRequest) {
const todosPath = path('todos');
const length = get(todosPath).length;
const operations = [
add(at(todosPath, length), payload)
];
return operations;
}
function calculateCountsCommand({ get, path }: CommandRequest) {
const todos = get(path('todos'));
const completedTodos = todos.filter((todo: any) => todo.completed);
const operations = [
replace(path('activeCount'), todos.length - completedTodos.length),
replace(path('completedCount'), completedTodos.length)
];
return operations;
}A Command, or the CommandRequest argument to it, can be provided with generics that indicate the type of the state of the store they are intended to target and the payload that will be passed. This will provide type checking for all calls to path and at and usages of payload, ensuring that the operations will be targeting real properties of the store, and providing type inference for the return type of get.
interface MyState {
id: string;
}
interface Payload {
id: string;
}
const command = (request: CommandRequest<MyState, Payload>) => {
return [
add(path('id'), request.payload.id);
];
};In order to avoid typing each Command explicitly, a CommandFactory can be created that will pass its generic types onto all commands it creates. Creating commands using a factory is essentially the same as creating them without one. It is simply a convenience to avoid repeating the same typings for each command.
interface Todo {
completed: boolean;
label: string;
}
interface TodoState {
todos: Todo[];
activeCount: number;
completedCount: number;
}
const createCommand = createCommandFactory<TodoState>();
const addTodoCommand = createCommand(({ at, get, path, payload }) => {
const todos = get(path('todos'));
// const todos = get(path('todoes')); Fails to compile because `todoes` is not a property on the state
// const value = todos + 3; Fails to compile because todos is typed as inferred to be an array of `Todo` objects
const operations = [
// Using the utilities provided by the `operations` module ensures that the paths provided are valid,
// and that the values being added or replaced are of the appropriate type
add(at(path('todos'), todos.length), payload)
];
return operations;
});
const calculateCountsCommand = createCommand(({ get, path }) => {
const todos = get(path('todos'));
const completedTodos = todos.filter((todo: any) => todo.completed);
const operations = [
replace(path('activeCount'), todos.length - completedTodos.length),
replace(path('completedCount'), completedTodos.length)
];
return operations;
});Important: Access to state root is not permitted and will throw an error, for example, get(path('/')). This applies to Operations also, it is not possible to create an operation that will update the state root. Best practices with @dojo/stores mean touching the smallest part of the store as is necessary.
Commands support asynchronous behavior out of the box simply by returning a Promise<PatchOperation[]>.
async function postTodoCommand({ get, path, payload: { id }}: CommandRequest): Promise<PatchOperation[]> {
const response = await fetch('/todos');
if (!response.ok) {
throw new Error('Unable to post todo');
}
const json = await response.json();
const todos = get(path('todos'));
const index = findIndex(todos, byId(id));
// success
return [
replace(at(path('todos'), index), {
...todos[index],
loading: false,
id: data.uuid
})
];
}A Process is the construct used to execute commands against a store instance in order to make changes to the application state. Processes are created using the createProcess factory function that accepts an array of commands and an optional callback that can be used to manage errors thrown from a command. The optional callback receives an error object and a result object. The error object contains the error stack and the command that caused the error.
The result object contains the following:
- The
payloadpassed to the process undoOperationsto undo theprocess- A function to execute an additional
process.
The array of Commands are executed in sequence by the store until the last Command is completed or a Command throws an error. These processes often represent an application behavior. For example, adding a todo in a simple todo application which will be made up with multiple discreet commands.
A simple process to add a todo and recalculate the todo count:
const addTodoProcess = createProcess('add-todo', [ addTodoCommand, calculateCountCommand ]);A callback can be provided which will be called when an error occurs or the process is successfully completed:
function addTodoProcessCallback(error, result) {
if (error) {
// do something with the error
// possibly undo the operations
result.store.apply(result.undoOperations);
}
// possible additional state changes by running another process using result.executor(otherProcess)
}
const addTodoProcess = createProcess('add-todo', [ addTodoCommand, calculateCountCommand ], addTodoProcessCallback);The Process creates a deferred executor by passing the store instance addTodoProcess(store) which can be executed immediately by passing the payload, addTodoProcess(store)(payload). Or more often passed to your widgets and used to initiate state changes on user interactions. The payload argument for the executor is required and is passed to each of the Process's commands in a payload argument.
const addTodoExecutor = addTodoProcess(store);
addTodoExecutor({
foo: 'arguments',
bar: 'get',
baz: 'passed',
qux: 'here'
});Initial state can be defined on store creation by executing a Process after the store has been instantiated.
// Command that creates the basic initial state
const initialStateCommand = createCommand({ path }) => {
return [
add(path('todos'), []),
add(path('currentTodo'), ''),
add(path('activeCount'), 0),
add(path('completedCount'), 0)
]);
}
const initialStateProcess = createProcess('initial', [ initialStateCommand ]);
// creates the store, initializes the state and runs the `getTodosProcess` shown below.
const store = createStore();
initialStateProcess(store)();
// if a process contains an async command, like fetching initial data from a remote service the return promise can be used
// to control the flow.
getTodosProcess(store)().then(() => {
// do things once the todos have been fetched.
});The payload argument for the process executor can be specified as the second generic type when using createProcess
const process = createProcess<any, { foo: string }>('foo', [ command ]);
const processExecutor = process(store);
// The executor will require an argument that satisfies `{ foo: string }`
processExecutor({ foo: 'bar' });
processExecutor({ foo: 1 }); // Compile errorThe process executor's payload type will also be inferred by the payload type of the commands if not specified explicitly, however, the payload type for all the commands must be assignable when this is not the case the payload generic type needs to be explicitly passed.
const createCommandOne = createCommandFactory<any, { foo: string }>();
const createCommandTwo = createCommandFactory<any, { bar: string }>();
const commandOne = createCommandOne(({ get, path, payload }) => []);
const commandTwo = createCommandTwo(({ get, path, payload }) => []);
const processOne = createProcess('one', [commandOne]);
const executorOne = processOne(store); // payload for executor inferred based on `commandOne`
executorOne({ foo: 'foo' });
executorOne({ bar: 'foo' }); // compile error
// compile error as payload types for commandOne and commandTwo are not assignable
const processTwo = createProcess('two', [commandOne, commandTwo]);
// Explicitly passing a generic that satisfies all the command payload types enables payload type widening
const processTwo = createProcess<any, { foo: string, bar: string }>('two', [commandOne, commandTwo]);
const executorTwo = processTwo(store);
executorTwo({ foo: 'foo' }); // compile error, as requires both `bar` and `foo`
executorTwo({ foo: 'foo', bar: 'bar' }); // Yay, validAlternatively, the payload can be typed at command creation
const createCommandOne = createCommandFactory<MyState>();
const commandOne = createCommandOne<{ foo: string }>(({ get, path, payload }) => []);Although Dojo 2 stores is a big atom state store, you never get access to the entire state object. To access the sections of state that are needed we use pointers to return the slice of state that is needed i.e. path('path', 'to', 'state'). State is never directly updated by the user, with state changes only being processed by the operations returned by commands.
There is no concept of reducers, meaning that there is no confusion about where logic needs to reside between reducers and actions. Commands are the only place that state logic resides and return operations that dictate what state changes are required and processed internally by the store.
Additionally, this means that there is no need to coordinate actions and reducers using a string action key. Commands are simple function references that can be reused in multiple processes.
To be notified of changes in the store, use the onChange() function, which takes a path or an array of path's and a callback for when that portion of state changes, for example:
store.onChange(store.path('foo', 'bar'), () => {
// do something when the state at foo/bar has been updated.
});or
store.onChange([
store.path('foo', 'bar'),
store.path('baz')
], () => {
// do something when the state at /foo/bar or /baz has been updated.
});In order to be notified when any changes occur within the store's state, simply register to the stores .on() method for a type of invalidate passing the function to be called.
store.on('invalidate', () => {
// do something when the store's state has been updated.
});Store data can be connected to widgets within your application using the Containers & Injectors Pattern supported by @dojo/widget-core. The @dojo/stores package provides a specialized injector that invalidates store containers on two conditions:
- The recommended approach is to register
pathson container creation to ensure invalidation will only occur when state you are interested in changes. - A catch-all when no
pathsare defined for the container, it will invalidate when any data changes in the store.
import { WidgetBase } from '@dojo/widget-core/WidgetBase';
import { Store } from '@dojo/stores/Stores';
import { StoreContainer } from '@dojo/stores/StoreInjector';
interface State {
foo: string;
bar: {
baz: string;
}
}
// Will only invalidate when the foo property is changed
const Container = StoreContainer<State>(WidgetBase, 'state', { paths: [ [ 'foo' ] ], getProperties(store: Store<State>) {
return {
foo: store.get(store.path('foo'))
}
}});
// Catch all, will invalidate if _any_ state changes in the store even if the container is not interested in the changes
const Container = StoreContainer<State>(WidgetBase, 'state', { getProperties(store: Store<State>) {
return {
foo: store.get(store.path('foo'))
}
}});Instead of typing StoreContainer for every usage, it is possible to create a pre-typed StoreContainer that can be used across your application. To do this use createStoreContainer from @dojo/stores/StoreInjector passing the stores state interface as the generic argument. The result of this can be exported and used across your application.
interface State {
foo: string;
}
export const StoreContainer = createStoreContainer<State>();An optional transformer can be passed to a process that is used to transform the executor's payload to the command payload type. The return type of the transformer must match the command payload type of the process. The argument type of the executor is inferred from transformers payload type.
interface CommandPayload {
bar: number;
foo: number;
}
// `CommandPayload` types the command payload and the argument of the process executor
const createCommand = createCommandFactory<any, CommandPayload>();
// `payload` is typed to `CommandPayload`
const command = createCommand(({ get, path, payload }) => {
});
const process = createProcess('example', [command]);
interface TransformerPayload {
foo: string;
}
// The transformer return type must match the original `CommandPayload`
const transformer = (payload: TransformerPayload): CommandPayload => {
return {
bar: 1,
foo: 2
};
};
// when no transformer passed to the process the executor `payload` is typed to `CommandPayload`
const processExecutor = process(store);
// Works
processExecutor({ bar: 1, foo: 2 });
// These shouldn't work as `payload` does not match `CommandPayload` interface
processExecutor({ bar: '', foo: 2 });
processExecutor({ foo: '' });
// when a `transformer` passed to the process the `transformer` return type must match `CommandPayload`
// and the executor `payload` type becomes `payload` type of the `transformer`
const processExecutor = process(store, transformer);
// Works as the `transformer` payload type is `{ foo: string }`
processExecutor({ foo: '' });
// Shouldn't work as `payload` does not match the `TransformerPayload` type
processExecutor({ bar: 1, foo: 2 });
processExecutor({ bar: 1, foo: '' });Each Command will be passed the result of the transformer as the payload for example: { bar: 1, foo: 2 }
Optimistic updating can be used to build a responsive UI despite interactions that might take some time to respond, for example saving to a remote resource.
In the case of adding a todo item for instance, with optimistic updating, we can immediately add the todo before we even make a request to the server and avoid having an unnatural waiting period or loading indicator. When the server responds we can then reconcile the outcome based on whether it is successful or not.
In the success scenario, we might need to update the added Todo item with an id that was provided in the response from the server and change the color of the Todo item to green to indicate it was successfully saved.
In the error scenario, it might be that we want to show a notification to say the request failed and turn the Todo item red, with a "retry" button. It's even possible to revert/undo the adding of the Todo item or anything else that happened in the process.
const handleAddTodoErrorProcess = createProcess('error', [ () => [ add(path('failed'), true) ]; ]);
function addTodoCallback(error, result) {
if (error) {
result.store.apply(result.undoOperations);
result.executor(handleAddTodoErrorProcess);
}
}
const addTodoProcess = createProcess('add-todo', [
addTodoCommand,
calculateCountsCommand,
postTodoCommand,
calculateCountsCommand
],
addTodoCallback);addTodoCommand: Adds the new todo into the application statecalculateCountsCommand: Recalculates the count of completed and active todo itemspostTodoCommand: posts the todo item to a remote service and using the process callback we can make changes if there is a failure- on failure: the previous two commands are reverted and the
failedstate field is set totrue - on success: Returns operations that update the todo item
idfield with the value received from the remote service
- on failure: the previous two commands are reverted and the
calculateCountsCommand: Runs again after the success ofpostTodoCommand
To support "pessimistic" updates to the application state, i.e. wait until a remote service call has been completed before changing the application state simply put the async command before the application store update. This can be useful when performing a deletion of a resource, when it can be surprising if an item is removed from the UI "optimistically" only for it to reappear back if the remote service call fails.
function byId(id: string) {
return (item: any) => id === item.id;
}
async function deleteTodoCommand({ get, payload: { id } }: CommandRequest) {
const { todo, index } = find(get('/todos'), byId(id))
await fetch(`/todo/${todo.id}`, { method: 'DELETE' } );
return [ remove(path('todos', index)) ];
}
const deleteTodoProcess = createProcess('delete', [ deleteTodoCommand, calculateCountsCommand ]);Note: The process requires the counts to be recalculated after successfully deleting a todo, the process above shows how easily commands can be shared and reused.
A Process supports concurrent execution of multiple commands by specifying the commands in an array when creating the process:
const myProcess = createProcess('my-process', [ commandOne, [ concurrentCommandOne, concurrentCommandTwo ], commandTwo ]);In this example, commandOne is executed, then both concurrentCommandOne and concurrentCommandTwo are executed concurrently. Once all of the concurrent commands are completed the results are applied in order before continuing with the process and executing commandTwo.
Note: Concurrent commands are always assumed to be asynchronous and resolved using Promise.all.
The Process callback provides a hook to apply generic/global functionality across multiple or all processes used within an application. This is done using higher order functions that wrap the process' local callback using the error and result payload to decorate or perform an action for all processes it is used for.
callback decorators can be composed together to combine multiple units of functionality, such that in the example below myProcess would run the error and result through the collector, logger and then snapshot callbacks.
const myProcess = createProcess('my-process', [ commandOne, commandTwo ], collector(logger(snapshot())));Specifying a callback decorator on an individual process explicitly works for targeted behavior but can become cumbersome when the decorator needs to be applied to multiple processes throughout the application.
The createProcessWith higher order function can be used to specify callback decorators that need to be applied across multiple processes. The function accepts an array of callback decorators and returns a new createProcess factory function that will automatically apply the decorators to any process that it creates.
const customCreateProcess = createProcessWith([ logger ]);
// `myProcess` will automatically be decorated with the `logger` callback decorator.
const myProcess = customCreateProcess('my-process', [ commandOne, commandTwo ]);An additional helper function createCallbackDecorator can be used to turn a simple ProcessCallback into a decorator that ensures the passed callback is executed after the decorating callback has been run.
const myCallback = (error: ProcessError, result: ProcessResult) => {
// do things with the outcome of the process
};
// turns the callback into a callback decorator
const myCallbackDecorator = createCallbackDecorator(myCallback);
// use the callback decorator as normal
const myProcess = createProcess('my-process', [ commandOne ], myCallbackDecorator());© 2018 JS Foundation. New BSD license.