Skip to content

dmcg/raspberry-strogonanoff

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

53 Commits
 
 
 
 
 
 

Repository files navigation

Raspberry Strogonanoff

A Raspberry Pi Remote Mains Switcher, to switch these

http://www.maplin.co.uk/remote-controlled-mains-sockets-5-pack-348217

with one of these

http://proto-pic.co.uk/434mhz-rf-link-transmitter/

using the awesome reverse engineering detailed here

http://www.fanjita.org/serendipity/archives/53-Interfacing-with-radio-controlled-mains-sockets-part-2.html

Installation

Requires WiringPi-Python

git clone https://github.com/WiringPi/WiringPi-Python.git
cd WiringPi-Python/
git submodule update --init
sudo apt-get install python2.7-dev python-setuptools
sudo python setup.py install

Circuit

You'll need something like this http://proto-pic.co.uk/434mhz-rf-link-transmitter/

Assuming that is the one you buy, the transmitter has 4 pins. Wire

Tx PinRaspberry Pi Header Pin
Pin 1 GNDPin 6 0V (Ground)
Pin 2 Data inPin 11 GPIO 0
Pin 3 VccPin 2 5.0 VDC Power
Pin 4 ANT173mm antenna wire (not on the Pi!)
where the Raspberry Pi Header Pin numbers are the little ones on the inside of the diagram below.

If you've had to read this section, please see the disclaimer below.

Running

Needs to be run as root -

sudo ./strogonanoff_sender.py --channel 1 --button 3 --gpio 0 on 

where the GPIO pin number is 0 (the default) if wired as per the table above, or otherwise the big ones on this diagram

Disclaimer

It works for me, but connecting stuff to your Raspberry Pi can destroy either end. If it does, no matter how negligent I've been, I'm sorry, but it's your problem.

About

Raspberry Pi Remote Mains Switcher

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages