Send and receive incremental / thin LVM snapshots. Replication / synchronisation of an LVM volume to a remote server by transmitting only the difference between snapshots.
Working in an initial form. Needs a little setup, documented at LVMSnapSend.md. Remember, you must never write to the target volume.
Monitor your thin LVs using LVMSpaceCheck Also useful is DDRandom.md
LVM volumes (LVs) are useful, however synchronising them between machines is generally slow, especially when repeated. The goals of this project are:
- Synchronise LVs between machines similar to a zfs send / receive
- No need to read the entire LV to run a sync (low IO)
- Does not have a large performance penalty in either reads, writes, or CPU.
- Able to verify and mount the snapshots
- No need to unmount the volume / shut down the virtual machine
- Filesystem and encryption agnostic. I should be able to sync ext4, xfs, etc.
The use case I am aiming for is to have VM images synchronised across to another server.
This is only intended to run on thinly provisioned LVM.
I will be testing on Ubuntu, but welcome feedback for other platforms / OSes.
~~This is literally the start of the project. So far there is nothing. ~~Goals for the project are:
Write useful libraries to snapshot the LV, snapshot the thin metadata, and extract the changed blocks and block sizesBasic proof of concept. Synchronise two manually created snapshots between 2 servers. Probably using dd over ssh or something else lame.Extract things like block size and thin volume using lvs and co.Create and delete the snapshots as well as synchronise- Server mode over ssh
- Run as a daemon so that your LVs are continuously synchronised. This requires robust error handling
- Alerts / monitoring / emails
- Ensure continuous consistency at the destination e.g. when there is a failure partway through the sync. Probably by snapshotting at the destination.
- Allowing for synchronising to a file. This would be VERY useful.
- Verify the snapshot at both ends (probably daily, as otherwise we are reading the LV every time)
- Automate the original send (something like blocksync) and possibly LV or file creation.
- Alerting on thin pool size and metadata usage
- World domination!
There is absolutely no intent to support synchronising without a snapshot.
Running on a single AWS small instance and via SSH, I am getting changes detected, read, transferred, and written at roughly 10MB/s. This means that for 50MB of writes, it takes ~5 seconds to do a sync. This is irrespective of the size of the underlying device. For devices in the 10s or 100s of GB this is a boon.
Running rsyncs of large file collections in the 10s and 100s of MB total e.g. /usr/bin or /usr/lib the size of changed blocks is very close to the size of the files. In other words, 10MB of files leads to 11 - 12 MB of block changes.
This performance makes it seem reasonable that we could potentially be synchronising the device every minute (or more frequently) once a service has been written.
- Blocksync https://github.com/theraser/blocksync is very good but reads the entire LV. For large LVs this is slow and consumes IO on the source and target
- lvsync https://github.com/mpalmer/lvmsync seems to have a lot of features but requires the LV to be closed / VM to be shut down. It also does an initial full sync just like blocksync.
- drdb https://www.linbit.com/ is costly if you want the proxy (and if running over a WAN, you need a proxy) and there is no easy way to verify the replicas as the other end
- sparsebak https://github.com/tasket/sparsebak seems to be aimed at backups rather than replication
This project is sponsored by:
Thin LVM is not the most well documented API. The high level approach for now is:
I will be maintaining at least a basic LVM document to outline how thing LVM snapshotting works as it seems like a useful service.
# Get the chunk size
lvs -o lv_name,chunksize volg/volg-thinpool
# Get the device IDs
SNAP1_ID=$(lvs --noheadings -o thin_id volg/thin_volume_snap4)
SNAP2_ID=$(lvs --noheadings -o thin_id volg/thin_volume_snap5)
# Reserve the metadata
dmsetup message /dev/mapper/volg-volg--thinpool-tpool 0 reserve_metadata_snap
dmsetup status /dev/mapper/volg-volg--thinpool-tpool # Get the snapshot ID piping through: cut -f 7 -d " "
# Determine the difference between the snapshots
thin_delta -m --snap1 $SNAP1_ID --snap2 $SNAP2_ID /dev/mapper/volg-volg--thinpool_tmeta
# Release the metadata snapshot. Try to keep this window short.
dmsetup message /dev/mapper/volg-volg--thinpool-tpool 0 release_metadata_snap
# Take those blocks and push them to the target device / file.